Beer Tap Component Hardware"Turn" your beer taps into one-of-a-kind masterpieces with a bit of creativity, a quick spin on the lathe, and this high quality hardware. Use the Bottle Blank below, or turn any old blank to whatever shape you like, and pair with a Ferrule, Finial and a Label Shield/Label Finial. Bottle blank is 2-…
Hand Woven Brass GrilleOnly from Rockler Woodworking and Hardware - hand woven brass grille in widths up to 24" and in any length you need! A great decorative enhancement for entertainment centers, wine cabinets and racks, curio and china cabinets and kitchen dividers and cabinets. May be used with or without glass…
6-Foot Bar TubingCreate a distinctive look with your choice of Solid Brass or Stainless Steel Tubing! Perfect for hand railings, stair railing, and bar railing, each tube is hand polished to a mirror-like finish and fits with any decor. Comes in your choice of 1-1/2" or 2" diameter solid brass or stainless steel…
Foot Rail Combination BracketSecures Foot Rail on two surfaces.Measurements (for use with 1-1/2" inch tubing):clearance/projection (CP): 6-1/8"height(H): 6-1/4"Measurements (for use with 2" inch tubing):clearance/projection (CP): 6-1/8"height(H): 7"
Foot Rail Bar BracketAttaches foot rail to bar fronts. (Note: All brackets and are supplied with necessary hardware for proper installation.) Bar Mount Bracket may be boltedfrom back side for additional strength.Measurements (for use with 1-1/2" inch tubing):clearance/projection (CP): 6-1/16"base(B): 4"Measurements…
Foot Rail Floor BracketSecurely fastens foot rail to the floor. (Note: All brackets and are supplied with necessary hardware for proper installation.)Measurements (for use with 1-1/2" inch tubing):clearance/projection (CP): 5-5/8"base(B): 6-11/16"Measurements (for use with 2" inch tubing):clearance/projection (CP): 6-1/8"…
Beer Bottle Tap Handle BlankTurn your beer taps into one-of-a-kind masterpieces with these solid maple beer bottle blanks. If desired, you can pair the blank with our Oval Label Shield (46389, sold separately), or you can get creative with a woodburner, router, carving knife, or even integrate an actual beer bottle label into…
Flush End CapFinishes off railing end. Measurements (for use with 1-1/2" inch tubing):diameter(D): 1-1/2"height(H): 1/8"Measurements (for use with 2" inch tubing):diameter(D): 2"height(H): 1/8"
Brunswick Foot Rail BracketAdd a classic Victorian look to your foot rail with the Brunswick Foot Rail Bracket. The foot rail bracket base mounts on the bar front at floor level and has a movable leg for easy floor cleaning.
Handrail Wall BracketEasily secures handrail to a wall. (Note: Fittings are supplied with self-drilling, self-tapping hardware.)Measurements for use with 1-1/2" tubing:clearance/projection (CP): 2-1/2"diameter (D): 2-1/2"Measurements for use with 2" tubing:clearance/projection (CP): 2-1/2"diameter (D): 2-1/2"
Stainless Steel Dry SinkIdeal for locations where plumbing is not available, this stainless steel dry sink is great for cooling beverages and a variety of other purposes. The sink features a large outer lip, making it easy to inset into a bar or counter top.
Short Rail End PostSecures and caps short rail. Features a 1" long sleeve for added strength and adhesive coverage. (Note: Hand rail fittings are supplied with self-drilling / self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):clearance/projection (CP): 2-7/16"diameter (D): 2-15/16"Measurements…
Splice ConnectorEasily splice 2 tube ends together. Splice connector piece is not visible when tubes are connected. Measurements (1-1/2" inch tubing):splice size(A): 1-1/2"thickness(T): 0.050"Measurements (2" inch tubing):splice size(A): 2"diameter (D): 0.050"
Short Rail Center PostEasily achieve a streamlined look using Short Rail Center Posts to secure the tubing. Features a 1" long sleeve for added strength and adhesive coverage. (Note: Hand rail fittings are supplied with self-drilling / self-tapping hardware.) Measurements (for use with 1-1/2" inch tubing):clearance…
90 Degree Flush ElbowA smooth 90 bend for flush railing. Features a 1" long sleeve for added strength and adhesive coverage. (Note: Hand rail fittings are supplied with self-drilling / self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):width(W): 2-1/4"length(L): 2-1/4"Measurements (for use with 2"…
Ball FinialBeautify your railing system with a classic finial. Measurements (for use with 1-1/2" inch tubing):diameter(D): 2-5/8"height(H): 3-1/4"Measurements (for use with 2" inch tubing):diameter(D): 3-1/8"height(H): 4-1/2"
Service Bar Rail with Wall FlangesThe Service Bar Rail is ideal for keeping patrons our of busy wait station areas. The sturdy bar rail comes with both mounting flanges and work with two inch bar systems.
Arm Rail BracketEasily secure Arm Rail Tubing. Measurements (for use with 1-1/2" inch tubing):clearance/projection(CP): 6"Measurements (for use with 2" inch tubing):clearance/projection(CP): 5-5/8"
3-Tube Ball CornerConnects a 3-tube corner. (Note: All ball fittings are supplied with self-drilling, self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):depth(D): 2-1/2"length(L): 2-3/4"Measurements (for use with 2" inch tubing):depth(D): 3-1/4"length(L): 3-1/2"
4-Foot Radius-Back Channel for 1/4" Glass4-Foot Radius-Back Channel for 1/4" GlassMeasurements (for use with 1-1/2" inch tubing):height(A): 1/2"width(B): 1/2"thickness(T): 0.0940"
2-Tube Ball Corner Tubing ConnectorCreates a right angle from 2 tubes. (Note: All ball fittings are supplied with self-drilling, self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):depth(D): 2-1/2"length(L): 2-3/4"Measurements (for use with 2" inch tubing):depth(D): 3-1/4"length(L): 3-3/4"
Wall FlangeSecures railing to the wall.Measurements (for use with 1-1/2" inch tubing):diameter(D): 3"height(H): 1-1/4"Measurements (for use with 2" inch tubing):diameter(D): 4"height(H): 1-1/4"
Floor FlangeSecures railing to the floor.Measurements (for use with 1-1/2" inch tubing):diameter(D): 4"height(H): 1-1/4"Measurements (for use with 2" inch tubing):diameter(D): 5"height(H): 1-3/8"
Ball Single Outlet Tubing EndA classic cap to the railing end piece. (Note: All ball fittings are supplied with self-drilling, self-tapping hardware.) Measurements (for use with 2" inch tubing):Diameter (D): 3-1/4"Length (L): 3-3/8"
Scroll End for HandrailA decorative end for handrail. (Note: All ball fittings are supplied with self-drilling, self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):width(W): 2-3/4"height(H): 2-7/8"Measurements (for use with 2" inch tubing):width(W): 3"height(H): 3-1/8"
(1)
