Our solid brass screws are polished, then lacquered to prevent tarnish. They are a great choice to complement projects with additional solid brass hardware. 25 per pack.
From $3.39
The perfect screw choice for decorative purposes such as cabinet or door hardware. 100 count packsChoose from Nickel or Statuary Bronze Available in 1/2" or 3/4"
From $1.99
General woodworking screw stays where you put it for tight, solid joint. Type 17 self-drilling point makes for easy driving, less splitting Lube finish reduces friction while driving Deep thread to prevent over-driving in softwoods Maximum bearing surface helps resist pulloutUses a #2 square drive bit
From $5.19
Type 17 self-drilling point predrills itself. Self-countersinking "nibs" under the head.
From $3.49
…theclamping rings, loosen the set screws from the rings and slide the rings to thedesired location. Then tighten the set screws and bases. You're ready to install yourpull for a unique look. Adjustable to 4-1/4" from base to base. 4-3/4" overall length.Mounting screws included. Available in three finishes…
$12.99
…/4" heads are perfect when you need a low profile look. Uses #1 driver. Stainless steel gives you complete confidence in corrosion resistance. 50 screws per pack.Optional Bin Boxes are available with your order.
From $8.99
This Recex #2 Square-Phillips Combination Recess Screw is a thread cutting screw perfect for using in any wood. The special head allows it to predrill itself, making entry easy and without splitting.Technical Details: Coarse tapping screw thread and special long sharp point is fluted to capture chips…
From $3.49
Hang heavy items securely and flush to your wall with easy-to-use Z-shaped, aluminum clips! The clips provide a secure mount for wall panels, partitions, frames, cabinets, and more. Once installed, clips wedge together to lock panels in place. To disengage panels, simply lift and remove! Each clip…
$16.99
Use these inconspicuous brass plated mending plates to reinforce splices, butt joints and other seams and joinery elements on cabinetry, furniture and picture frames. At only 2" long and 1/16" thick, they're ideal for small repairs where the mending plate should stay as hidden as possible.
(Reg. $1.69)
Now $0.99
SAVE 41% TODAY!
A truly clever and versatile driving set! The locking speed chuck accepts all includedhex bits and the extendable magnetic bit holder, which adjusts driver length up to3". A cushioned grip adds comfort to operation. The handle unit features a spin capthat holds included magnetic bits and has a…
(Reg. $19.99)
Now $4.99
SAVE 75% TODAY!
…Hingemaster Truss Head Screws greatly reduce the risk of splitting when driving screws without a pilot hole. That time-saving benefit makes them a favorite of professional woodworkers. The large bearing surface of the screw head also helps eliminate pull-through, and makes the screws ideal for fastening…
$4.19
Kreg self-tapping screws are specially designed for Pocket-Screw Joinery. They feature a self-tapping auger point that eliminates pre-drilling and a flat head that seats flushly in the bottom of the Pocket-Hole. All of our screws utilize a #2 square drive recess. The deep recess of the square drive provides…
$17.99
…enough space for a stretcher support running the length of the rail. The flats where the screws insert make installation easy since your screws won't wander as they would if driven in at an angle. Sold in packs of 4.
$3.79
100% stainless steel pocket hole screws eliminate the risk of rust and corrosion to keep your garden and patio furniture together indefinitely, and look good doing it. These pocket screws boast all the features of standard Kreg screws. The self-tapping screw tips make for easy driving and the wide washer…
From $18.99
…have the pocket hole screw for every job! Includes some of Kreg's most popular weather-resistant Blue-Kote screws in a durable easy-to-carry case. All feature deep #2 square drives and a needle-point self-tapping tip. Includes 450 pocket hole screws Rust-resistant Blue-Kote screws have three anti-corrosion…
$39.99
…Anchors holds up to 100 lbs. when installed into a stud, or up to 30 lbs. when used with an anchor (anchors not included)! The 1-1/4" double-headed screws work well with sawtooth hangers, keyholes, D-rings or wired art. The self-drilling tip doesn't require a pilot hole and installs easily using just…
$4.19
Century Hollow Brass, Mushroom Knob, 1-1/4" dia. Satin Brass, 12016-4Diameter:1-1/4"Projection:1-1/16"Screws are included
$4.99
Century Solid Brass, Knob, 1-1/4" dia. Satin Brass, 12405-4Diameter:1-1/4"Projection:1-1/8"Screws are included
$7.39
…concealed beneath the drawer, allowing you to fully display the grain and workmanship of your wooden drawers. Includes 2 drawer lock mechanisms, screws, and rear brackets for optional face frame installation.100 lb static ratingModel 552F uses 3/4" materialInstructions (found under Tech Documents to…
(Reg. $29.99)
Now $19.99
SAVE 33% TODAY!
…thin kerf saw blade to create a groove in theedge of your material, drill a hole where the insert will be, and you're ready forassembly. Accepts any bolt with a 10-32 threading.
$4.99
Swivel Mirror Screws give your mirror old-fashioned charm! Allows easy mirror movement. A 3-1/2" overall steel bolt with a styled head in brass or antique brass, includes the threaded insert for installation. Threaded portion of bolt is 2-1/4" longThe threaded insert length of thread is 9/16 with a 3…
From $12.59
Available in lengths ranging from 3/8" to 1-1/4", these solid brass wood screws are well-suited for a range of woodworking tasks. They have a flat-head design that allows them to sit flush with the surface once installed, and the Phillips heads are highly resistant to stripping.
$1.29
Same great slides, sold in cases of 25 sets per case for those with large quantity needs. Screws sold separately. Each case of 25 slides requires one pack of 52532 screws (400 per pack).
From $125.99
An interlocking hanger bracket for hanging vanity cases, wall units, and mirrors. One piece fits into the other to form a solid streamline interlocking mount that measures 1/8" thick. Can be used individually for small hangings or for wide wall hangings, multiple mounts are recommended.Zinc plated…
$3.99
Maneuver your heavy work bench with ease using our Workbench Caster Set! This set of four easy-spin 2-3/8" urethane casters feature a foot-activated lift mechanism that engages or disengages with the touch of your toe. Engage them to lift your bench 3/4" off the floor for mobility, disengage them for…
$79.99
(0 Items)