…on the hands and provide plenty of torque for use as jig knobs on fixtures, router tables, drill presses and more. These 5-Star Knobs are available with a through-hole and threaded insert for use with a T-bolt and T-slot or T-track, or with a 1" threaded stud. Choose from three different threadings…
$1.99
…trouble getting a handle on your new jig? Try adding a 4-1/2" Tapered Knob to your project! These 4-1/2" black handles come in your choice of 3/8" insert with 16 TPI or 5/16" insert with 18 TPI. They're just what the doctor ordered for jigs, fixtures, or anything that's asking for a long-lasting handle.
$3.19
…T-bolts, or 1/4" Hex-bolts. With this full-service kit you get: One 4' length of Universal T-Track Two 3-1/2" x 5/16" T-bolts Two 1" x 5/16" T-bolts Two 1-1/2" x 5/16" T-bolts Two 2-1/2" x 5/16" T-bolts Four T-knobs Four 5-star knobs Additional lengths of track are sold separately, below. For added…
$31.99
These 1" Round Knobs with Bolt are ideal for jigs, router tables, drill presses and other similar applications. They work great with our T-Slot System. Choose from threaded insert or 1" bolt.
From $1.99
Setting up shop jigs is a snap with tapered knobs. Easy to grasp to enhance adjustability and functionality of your jigs.
From $1.99
…feature the same sturdy, anodized aluminum construction in a slightly slimmer design, without the non-marring rubber tips. The Clamps include a 5-star knob and a T-bolt designed to fit into T-tracks on drill presses, router tables and more.The Hold Down Clamp, 5-1/2"L x 1-1/8"W provides the same great features…
$7.99
Cut custom coves on your table saw without juggling all those fences and clamps! This jig includes everything you need for safe, easy coving in one easy-to-use package. Accepts stock up to 7" wide and 1-1/2" thick, enabling you to cut huge crown moldings that would cost a fortune from the lumberyard…
$89.99
With Micro Jig's precision tapering jig, you can cut clean, crisp tapers with precise repeatability in increments as fine as 1/8 of a degree. Cut 2-, 4-, even 8-sided tapered legs as well as tapers for table tops and cabinet parts with a single jig! The Microdial adjustment system features index holes…
$139.99
Save over $70 versus buying components individually! With all the essentialhardware for building or repairing custom jigs, these kits will be a fixture in yourshop for years to come. Available in two thread sizes (1/4"-20 or 5/16"-18). T-boltsin both kits will fit all Rockler Universal T-Tracks. Click…
$69.99
…for smaller work surfaces, such as benchtop router tables and shop-made jigs. Non-marring rubber tips are ideal for working with soft woods, pre-finished panels, or anything that's already been prep sanded. Includes a 4-star knob, washer and a 5/16" x 3" T-bolt designed to fit into T-tracks on drillpresses…
$4.99
Rockler exclusive JIG IT template makes marking screw holes for knob and pull installation quick, simple and accurate.Offers spacing for 2-1/2", 3", 3-1/2", 3-3/4", 4" and 96mm.Includes 24" aluminum T-slot bar, left to right self-adhesive tape measure, stop block for repetitive drawer pull alignment…
$39.99
Securing shop jigs and fixtures is much easier with these handy knobs. Textured knob edge provides excellent grip to hand tighten or loosen your setups. Choose from knobs which include a threaded insert or a bolt according to your needs.
From $1.89
…grip the workpiece for better safety and accuracy. In addition, they have a wide aluminum body, allowing for maximum tension. Clamps include a 5-star knob and a 5/16" T-bolt designed to fit into T-tracks on drill presses, router tables and more.The Hold Down Clamp, 5-1/2"L x 3/4"W provides the same great…
$10.99
…circles: one sharp one, which is used for soft woods, and one blunt one, which is used if your design allows for drilling a center hole. A routed channel in the jig lets you slide the center pivot pin up or down the length of the jig to match the exact diameter of your circle. Use the 4-star knob to tighten…
$36.99
…choice for that jig or fixture that requires a little extra torque, or when you need a nice easy target to flick when spinning the knobs on and off. These T-knobs from Rockler have a pleasant textured surface and a threaded insert made of brass. The hole runs all the way through the knob, so there's no…
From $1.89
This dressing jig keeps your grinding wheels sharp, clean and perfectly round for fast, cool, clog-free performance. Precision adjustment knob allows you to shave off a mere 0.001", vastly prolonging the life of your wheels. The jig slides into the Wolverine Grinding Jig base (24707, sold separately…
From $78.29
…you need it and stays out of the way when you don't! Slides up and down any fence with a top-mounted T-track and locks down with a comfortable 1" diameter knob. 5/16" T-bolt fits both standard and Universal T-tracks. Also available: Rockler Flip Stop for 2-1/4" fences (31214).
$16.99
…featherboards in one easy-to-use accessory! Use this tough polymer attachment on 1/4" T-tracks or standard miter slots to secure tall stock for safe, clean cutting. Great for edge routing tall panels, resawing stock on the band saw, or ensuring chatter-free cuts on the table saw. Ergonomic T-knobs make for comfortable…
$37.79
With its cushioned, textured grip, this extra-long handle is perfect for use with all your shop jigs! At 4-3/8" long, it's especially comfortable for people with larger hands. 5/8" stud length. 5/16-18. Black only.
$7.39
…hand-cut look. This template has preset spacing for 4", 6", 8" and 10" widths. Setup is easy as can be; just install the template and start routing. Compatible with the current Rockler Dovetail Jig (22818). Includes pin template, tail template, knobs and T-bolts.Click the "More Info" tab above to see…
$39.99
…for 4", 5", 7" and 10" widths. Setup is easy as can be; just install the template and start routing. Compatible with the current Rockler Dovetail Jig (22818). Includes templates, knobs and T-bolts.Click the "More Info" tab above to see more Distinctive Series templates for the Rockler Dovetail Jig.
$39.99
3-Star Knob is ideal for assembling small jigs and fixtures. Three-prong design makes tightening and loosening adjustments easy.
$3.19
…circles (one pin is used for soft woods, use the other if your design allows drilling a center hole). A recessed groove in the jig lets you slide the center pivot pin (your center point) up or down the length of the jig to find the correct, exact diameter of your circle. Use the 4-star knob to tighten…
$39.99
…heavy-duty tenoning jig. Designed to fit any table saw with a 3/4" X 3/8" miter groove, this jig will hold your stock in precise position. The adjustable back stop will support stock from 0 degrees to 45 degrees. The width of the cut is controlled with a fine-threaded adjustment knob. Constructed of cast…
$117.99
…provide excellent dust extraction. Oscillating action has four settings for cuts from fine to aggressive. Electronic speed control is infinitely adjustable with a single dial. Barrel grip handle provides a low center of gravity with a knob for two-handed leverage. Also available in a traditional "D…
$265.00
(0 Items)