2-1/2" to 1-1/2" AdaptorSmall End: 1-1/2" O.D. - 1-1/4" I.D.Large End: 2-1/2" O.D. - 2-1/4" I.D.
Customize your own three-machine dust collection system with this 2-1/2" starterkit. Y-fittings are designed to service more than one machine and provide optimallateral airflow. Two elbows, two Y-fittings, three Stable Gate blast gates, andtwenty 2-1/2" hose clamps included. Enhance your system with…
Hard plastic port features a swivel top for easy access from any direction. With 4" and 2-1/2" fittings for transitioning between different sized hoses or from tool to hose. 360 degree swivel.
Eliminate flimsy duct tape connections while making an airtight seal with Dust Right Flexible Rubber Unions! These rubber unions solve irregular dust collection problems by giving you the flexibility to join lengths of pipe that aren't of the same diameter or aren't exactly aligned. Also available in…
Secures 2-1/2" dust hose and piping out of the way. Works with standard 2-1/2" clear hose (22784), 2-1/2" Dust Right Hose (32150) and 2-1/2" clear pipe (36249). Simple two-screw installation (screws not included).
…dust port! The 2-1/2" ID fitting with rubber boot and included hose clamp seals tight on 2-1/2" ports like T- or Y-fittings on your dust collection system, or a power tool dust port. The other side, a 2-1/4" ID fitting, quick-connects to the hose on your shop vacuum, making it easy to bring dust collection…
…many bench top style tools and accessories allowing you to adapt them to standard 2-1/2" dust systems. Works great with the Kreg Jig K4 Pocket Hole System (27204), Kreg Jig K4 Master System (41410), and the Dust Right Separator (45556), all sold separately.
Piping is more efficient than hose for dust collection over long distances. This clear plastic piping comes in 36" lengths to help get your dust collection from point A to point B. Shown here using 2-1/2" plastic hangers for mounting. Use 2-1/2" dust hose or #36973 coupler to join lengths of pipe, or…
Allows you to connect two 2-1/2" fittings together without the need for additional hose or hose clamps. Example: connect an elbow fitting to a Y-fitting. Plastic. 2-1/2" Coupling has 2-1/2" ID on each to accept 2-1/2" OD fittings.
Elbows are necessary whenever ductwork changes direction, such as, from the dust collector to an overhead mainline and when connecting individual machines to branch lines. Available for 2-1/2"
Expand your dust collection system with a handy 4" to 2-1/2" "Y" fitting. Reduces the branch to 2-1/2" for connecting a table saw, jointer, router, etc.
Designed to work with our 2 1/2" Flex Form hose (29996) or the 2 1/2" black dust hose commonly found on most wet/dry vacs. You will get a tight, screw-in fit that won't come loose with the 2-1/2" Screw End Adaptor (left hand threaded hoses only). Opposite end also plugs in to standard 2-1/4" openings…
Allows you to design a mainline and branch line dust collection system. 2-1/2" hose.1/8" Wall Thickness 2-1/2" Outside Diameter Ends
Allows you to design a mainline and branch line dust collection system. Primarily used when space or design limitations will not allow for Y-connectors.1/8" Wall Thickness 6-1/2" long overall, 4-5/8" high 2-1/2" Outside Diameter Ends, 2-1/4" Inner Diameter
…limitless possibilities to improve your dust collection system. With included adapters, flex hose equates to 2-1/4" OD.FlexForm Hose Kit includes:One 2-1/2" ID Flex Hose that expands from 12" to 36"Two Hose End Adapters (2-1/2" OD to 2-1/4" OD)One Narrow Nozzle Tool One Wide Nozzle Tool
This threaded quick coupler has one 2-1/2" end with threads that fit our 2-1/2" Clear Hose (22784), while the opposite end is flared for standard tool 4" ports. 2-1/4" I.D., 2-1/2" O.D., 2-7/8" Long.
2-1/2" Splicer units are used to connect full sections of hose for longer runs or to utilize short sections.
1/2" wide x 2-1/2" Metal Hose Clamp.5 per pack.Use flat bladed screwdriver to tighten
Easily connect your shop vacuum to any shop machine using this 2-1/2" Dust Port. 2-1/2" O.D.2-1/4" I.D. 3-3/4" flangeDurable ABS plastic
Enjoy complete connectivity with these sophisticated 2-1/2" hose clamps. A unique bridge component steps over coils in right-hand spiraling dust hose, allowing all clamping power to transfer directly to the connection. Phillips screw tightening system. 5 per pack. Also available, 4" Non Keyed Bridge…
Introducing a brand new approach to dust collection! A unique, segmented design allows FlexForm Hose to twist, bend, expand and/or collapse to a desired shape and length, then firmly hold that position - resulting in virtually unlimited versatility. This ability to bend around obstacles, expand or contract…
2-1/2" diameter and 10 foot length. Wire reinforced. Hose is Medium Weight PVC.
Design a main line and branch line system to service each machine in your shop. Available for 2-1/2" hose.
Heavy-duty construction is longer lasting and less likely to jam than plastic blast gates. Designed to fit inside the 2-1/2" clear flexible hose.
Available for 2-1/2" hoses. Comes in pack of 5. Use flat bladed screwdriver to tighten.