Customize your own three-machine dust collection system with this 2-1/2" starterkit. Y-fittings are designed to service more than one machine and provide optimallateral airflow. Two elbows, two Y-fittings, three Stable Gate blast gates, andtwenty 2-1/2" hose clamps included. Enhance your system with…
Hard plastic port features a swivel top for easy access from any direction. With 4" and 2-1/2" fittings for transitioning between different sized hoses or from tool to hose. 360 degree swivel.
2-1/2" to 1-1/2" AdaptorSmall End: 1-1/2" O.D. - 1-1/4" I.D.Large End: 2-1/2" O.D. - 2-1/4" I.D.
This threaded quick coupler has one 2-1/2" end with threads that fit our 2-1/2" Clear Hose (22784), while the opposite end is flared for standard tool 4" ports. 2-1/4" I.D., 2-1/2" O.D., 2-7/8" Long.
With this handle connected to the Rockler 2-1/2" Dust Right Expandable Hose, youcan hook up shop vac wands, bench sweepers and accessories in seconds for fastand easy shop-wide cleanup.
…dust collection over long distances. This clear plastic piping comes in 36" lengths to help get your dust collection from point A to point B. Shown here using 2-1/2" plastic hangers for mounting. Use 2-1/2" dust hose or #36973 coupler to join lengths of pipe, or to connect pipe to other 2-1/2" fittings.
Eliminate flimsy duct tape connections while making an airtight seal with Dust Right Flexible Rubber Unions! These rubber unions solve irregular dust collection problems by giving you the flexibility to join lengths of pipe that aren't of the same diameter or aren't exactly aligned. Also available in…
Secures 2-1/2" dust hose and piping out of the way. Works with standard 2-1/2" clear hose (22784), 2-1/2" Dust Right Hose (32150) and 2-1/2" clear pipe (36249). Simple two-screw installation (screws not included).
This versatile fitting slides into standard 1-1/4" openings found on many bench top style tools and accessories allowing you to adapt them to standard 2-1/2" dust systems. Works great with the Kreg Jig K4 Pocket Hole System (27204), Kreg Jig K4 Master System (41410), and the Dust Right Separator (45556…
Expand your dust collection system with a handy 4" to 2-1/2" "Y" fitting. Reduces the branch to 2-1/2" for connecting a table saw, jointer, router, etc.
Elbows are necessary whenever ductwork changes direction, such as, from the dust collector to an overhead mainline and when connecting individual machines to branch lines. Available for 2-1/2"
…dust port! The 2-1/2" ID fitting with rubber boot and included hose clamp seals tight on 2-1/2" ports like T- or Y-fittings on your dust collection system, or a power tool dust port. The other side, a 2-1/4" ID fitting, quick-connects to the hose on your shop vacuum, making it easy to bring dust collection…
Allows you to connect two 2-1/2" fittings together without the need for additional hose or hose clamps. Example: connect an elbow fitting to a Y-fitting. Plastic. 2-1/2" Coupling has 2-1/2" ID on each to accept 2-1/2" OD fittings.
…other fits perfectly into the Dust Right Handle, especially when used with the included Keyed 4" Bridge Hose Clamps. 4" Dust Right Tool Port with two ports and two metal hose clamps 2-1/2" Dust Right Tool Port with two ports and two metal hose clamps Allows you to connect your dust collection system…
…approach to dust collection! A unique, segmented design allows FlexForm Hose to twist, bend, expand and/or collapse to a desired shape and length, then firmly hold that position - resulting in virtually unlimited versatility. This ability to bend around obstacles, expand or contract to perfectly fit a given…
Great for getting your dust collection system around corners without losing efficiency. Helpful for horizontal and vertical changes in direction. Easily attaches to dust hose.
Large end fits snugly in a 2-1/2" hose. Flexible construction allows easy connection to any power tool. Versatile adaptor has multiple OD sizes, just cut to fit.
…limitless possibilities to improve your dust collection system. With included adapters, flex hose equates to 2-1/4" OD.FlexForm Hose Kit includes:One 2-1/2" ID Flex Hose that expands from 12" to 36"Two Hose End Adapters (2-1/2" OD to 2-1/4" OD)One Narrow Nozzle Tool One Wide Nozzle Tool
Designed to work with our 2 1/2" Flex Form hose (29996) or the 2 1/2" black dust hose commonly found on most wet/dry vacs. You will get a tight, screw-in fit that won't come loose with the 2-1/2" Screw End Adaptor (left hand threaded hoses only). Opposite end also plugs in to standard 2-1/4" openings…
Allows you to design a mainline and branch line dust collection system. 2-1/2" hose.1/8" Wall Thickness 2-1/2" Outside Diameter Ends
Allows you to design a mainline and branch line dust collection system. Primarily used when space or design limitations will not allow for Y-connectors.1/8" Wall Thickness 6-1/2" long overall, 4-5/8" high 2-1/2" Outside Diameter Ends, 2-1/4" Inner Diameter
Smooth swivel fittings rotate 360 to help you avoid kinked and coiled hoses. Simplyattach to your shop vac or dust collector and any 2-1/2" hose with Bridge HoseClamps (sold separately) to make dust collection and shop cleanup more convenient.
2-1/2" Splicer units are used to connect full sections of hose for longer runs or to utilize short sections.
Easily connect your shop vacuum to any shop machine using this 2-1/2" Dust Port. 2-1/2" O.D.2-1/4" I.D. 3-3/4" flangeDurable ABS plastic
Connects a 4" hose to your shop vacuum! 2-1/4" to 4" enlarger is plugs directly to standard 2-1/4" openings found on most wet/dry vacs. Hose clamp required (not included).