…improve your dust collection system. With included adapters, flex hose equates to 2-1/4" OD.FlexForm Hose Kit includes:One 2-1/2" ID Flex Hose that expands from 12" to 36"Two Hose End Adapters (2-1/2" OD to 2-1/4" OD)One Narrow Nozzle Tool One Wide Nozzle Tool
$21.99
…than one machine and provide optimallateral airflow. Two elbows, two Y-fittings, three Stable Gate blast gates, andtwenty 2-1/2" hose clamps included. Enhance your system with other 2-1/2"accessories including plastic hangers, fittings, couplings, and clear piping (notincluded). 2-1/2" hose sold separately…
$36.99
…these sophisticated 2-1/2" hose clamps. A unique bridge component steps over coils in right-hand spiraling dust hose, allowing all clamping power to transfer directly to the connection. Phillips screw tightening system. 5 per pack. Also available, 4" Non Keyed Bridge Hose Clamps.
$8.99
…-free setup with these sophisticated hose clamps. A unique bridge component steps over coils in right-hand spiraling dust hose, allowing all clamping power to transfer directly to the connection. For 2-1/2" clear hose. 5 per pack. Also available, 4" Keyed Bridge Hose Clamps.
$9.99
Designed to work with our 2 1/2" Flex Form hose (29996) or the 2 1/2" black dust hose commonly found on most wet/dry vacs. You will get a tight, screw-in fit that won't come loose with the 2-1/2" Screw End Adaptor (left hand threaded hoses only). Opposite end also plugs in to standard 2-1/4" openings…
$5.99
Available for 2-1/2" hoses. Comes in pack of 5. Use flat bladed screwdriver to tighten.
From $1.39
Secures 2-1/2" dust hose and piping out of the way. Works with standard 2-1/2" clear hose (22784), 2-1/2" Dust Right Hose (32150) and 2-1/2" clear pipe (36249). Simple two-screw installation (screws not included).
$7.99
2-1/2" diameter and 10 foot length. Wire reinforced. Hose is Medium Weight PVC.
$25.19
Allows you to connect two 2-1/2" fittings together without the need for additional hose or hose clamps. Example: connect an elbow fitting to a Y-fitting. Plastic. 2-1/2" Coupling has 2-1/2" ID on each to accept 2-1/2" OD fittings.
$1.99
…port! The 2-1/2" ID fitting with rubber boot and included hose clamp seals tight on 2-1/2" ports like T- or Y-fittings on your dust collection system, or a power tool dust port. The other side, a 2-1/4" ID fitting, quick-connects to the hose on your shop vacuum, making it easy to bring dust collection…
$7.99
…FlexForm Hose to twist, bend, expand and/or collapse to a desired shape and length, then firmly hold that position - resulting in virtually unlimited versatility. This ability to bend around obstacles, expand or contract to perfectly fit a given space, and maintain its shape makes FlexForm Hose ideal for…
$17.99
Piping is more efficient than hose for dust collection over long distances. This clear plastic piping comes in 36" lengths to help get your dust collection from point A to point B. Shown here using 2-1/2" plastic hangers for mounting. Use 2-1/2" dust hose or #36973 coupler to join lengths of pipe, or…
$7.99
2-1/2" Splicer units are used to connect full sections of hose for longer runs or to utilize short sections.
$3.99
Large end fits snugly in a 2-1/2" hose. Flexible construction allows easy connection to any power tool. Versatile adaptor has multiple OD sizes, just cut to fit.
$6.99
1/2" wide x 2-1/2" Metal Hose Clamp.5 per pack.Use flat bladed screwdriver to tighten
$6.29
Attach two hoses of different diameters together. A step down in size by a reducer increases air velocity near the machine where its needed most. Has 2-1/2" outer diameter and 2-1/4" inner diameter on the small end and a 4" outer diameter and 3-11/16" inner diameter on the large end.
$7.99
This threaded quick coupler has one 2-1/2" end with threads that fit our 2-1/2" Clear Hose (22784), while the opposite end is flared for standard tool 4" ports. 2-1/4" I.D., 2-1/2" O.D., 2-7/8" Long.
$5.99
Connects a 4" hose to your shop vacuum! 2-1/4" to 4" enlarger is plugs directly to standard 2-1/4" openings found on most wet/dry vacs. Hose clamp required (not included).
$5.99
…plastic port features a swivel top for easy access from any direction. With 4" and 2-1/2" fittings for transitioning between different sized hoses or from tool to hose. 360 degree swivel.
$15.99
…tedious to operate. Opening the gate often pulls the hose away from the wall. With its built-in mounting element, the StableGate takes care of everything. Just anchor it directly to the wall for clean and stable operation. Made from durable ABS plastic. Hose clamps sold separately. Patent pending.
$5.99
Get more from your Shop Vac! This versatile fitting slides onto standard 1-1/4" ShopVac hoses, allowing you to hook up suction to 2-1/4" (I.D.) dust ports on router tablefences, dovetail jig dust collectors and more.
$4.99
Smooth swivel fittings rotate 360 to help you avoid kinked and coiled hoses. Simplyattach to your shop vac or dust collector and any 2-1/2" hose with Bridge HoseClamps (sold separately) to make dust collection and shop cleanup more convenient.
$4.99
Allows you to design a mainline and branch line dust collection system. 2-1/2" hose.1/8" Wall Thickness 2-1/2" Outside Diameter Ends
$4.99
Design a main line and branch line system to service each machine in your shop. Available for 2-1/2" hose.
$4.99
Heavy-duty construction is longer lasting and less likely to jam than plastic blast gates. Designed to fit inside the 2-1/2" clear flexible hose.
$11.99
(0 Items)