Available for 2-1/2" hoses. Comes in pack of 5. Use flat bladed screwdriver to tighten.
From $1.39
1/2" wide x 2-1/2" Metal Hose Clamp.5 per pack.Use flat bladed screwdriver to tighten
$6.29
…than one machine and provide optimallateral airflow. Two elbows, two Y-fittings, three Stable Gate blast gates, andtwenty 2-1/2" hose clamps included. Enhance your system with other 2-1/2"accessories including plastic hangers, fittings, couplings, and clear piping (notincluded). 2-1/2" hose sold separately…
$36.99
…setup with these sophisticated hose clamps. A unique bridge component steps over coils in right-hand spiraling dust hose, allowing all clamping power to transfer directly to the connection. For 2-1/2" clear hose. 5 per pack. Also available, 4" Keyed Bridge Hose Clamps.
$9.99
…these sophisticated 2-1/2" hose clamps. A unique bridge component steps over coils in right-hand spiraling dust hose, allowing all clamping power to transfer directly to the connection. Phillips screw tightening system. 5 per pack. Also available, 4" Non Keyed Bridge Hose Clamps.
$8.99
…port! The 2-1/2" ID fitting with rubber boot and included hose clamp seals tight on 2-1/2" ports like T- or Y-fittings on your dust collection system, or a power tool dust port. The other side, a 2-1/4" ID fitting, quick-connects to the hose on your shop vacuum, making it easy to bring dust collection…
$7.99
Connects a 4" hose to your shop vacuum! 2-1/4" to 4" enlarger is plugs directly to standard 2-1/4" openings found on most wet/dry vacs. Hose clamp required (not included).
$5.99
Allows you to connect two 2-1/2" fittings together without the need for additional hose or hose clamps. Example: connect an elbow fitting to a Y-fitting. Plastic. 2-1/2" Coupling has 2-1/2" ID on each to accept 2-1/2" OD fittings.
$1.99
Keyed hose clamps have a thumb screw that allows you to quickly tighten or loosen without a screwdriver or wrench. Makes setting up, changing or cleaning your dust collection system easier! 5 per pack.
$9.99
…" Bridge Hose Clamps. 4" Dust Right Tool Port with two ports and two metal hose clamps 2-1/2" Dust Right Tool Port with two ports and two metal hose clamps Allows you to connect your dust collection system to any shop tool with a dust port Dust Right Handle Five Keyed 4" Bridge Hose Clamps
$39.99
…operate. Opening the gate often pulls the hose away from the wall. With its built-in mounting element, the StableGate takes care of everything. Just anchor it directly to the wall for clean and stable operation. Made from durable ABS plastic. Hose clamps sold separately. Patent pending.
$5.99
3" Keyed hose clamps have a thumb screw that allows you to quickly tighten or loosen without a screwdriver or wrench. Makes setting up, changing or cleaning your dust collection system easier! 5 per pack.
$8.99
The 2-1/2" hose in this kit stretches from approximately 2 feet up to 12 feet as you movearound and retracts to take up excess slack to prevent tangling and tripping. Easilyconnects to your shop vac and accessories as well as dust ports. Also included aretwo metal bridge clamps and two ABS swivel fittings…
$41.99
…complete connectivity with these sophisticated 4" hose clamps. A unique bridge component steps over coils in right-hand spiraling dust hose, allowing all clamping power to transfer directly to the connection. Works greatwith new Rockler Expandable Dust Right Hose. Phillips screw tightening system. 5 per pack…
$9.99
…sophisticated hose clamps. A unique bridge component steps over coils in right-hand spiraling dust hose, allowing all clamping power to transfer directly to the connection. For 4" clear hose. Works great with new Rockler Dust Right Hose. 5 per pack. Also available, 2-1/2" Keyed Bridge Hose Clamps.
$10.49
Allows you to connect two 4" or 2-1/2" fittings together without the need for additional hose or hose clamps. Example: connect an elbow fitting to a Y-fitting. 4" Coupling has 4" ID on each to accept 4" OD fittings. Plastic. 2-1/2" Coupling has 2-1/2" ID on each to accept 2-1/2" OD fittings.
From $1.99
…tight seals at every connection! This Pack of 5 Steel Hose Clamps will help you keep your dust collection line from leaking at every point between your tool and your dust collector. You get a pack of 5 in your choice of 2-1/2" or 4" clamps. Each one tightens or releases easily using a standard flat bladed…
From $1.39
For use with 4" hose and hose clamps (sold separately). Flared end allows you to quickly connect or disconnect any woodworking machine or fitting with a standard 4" port. 37789 has one end with threads that fit our 2-1/2" clear hose, while the opposite end is flared for standard 4" ports.
From $7.99
Move suction from tool to tool like never before! One end fits snug on any tool witha 2-1/2" dust port; the other connects tool-free to the Dust Right Handle (whichattaches to 4" hose and, ultimately, your dust collector). Packs of two. Clamps included.
$14.99
…attaching the included Deflector to the end of your rail to prevent your suction hose and cords from getting snagged. Connect rails for limitless cutting with the included Connectors. Use the two included Screw Clamps to for more secure, reliable cutting. Also includes replacment Splinterguard for splinterfree…
$200.00
…Attaches and seals dust hose!Sealing the joints in your dust collection system just got easier. X-Treme Tapestretches and bonds to itself to make an air-tight seal for plastic and metal dustjoints, ducts, tool grips and more. Connect and seal dust joints and accessorieswithout clamps. One 20' roll seals approximately…
$14.69
…flexibility to join lengths of pipe that aren't of the same diameter or aren't exactly aligned. Also available in 2-1/2" I.D. Includes a pair of clamps to give you an airtight seal. The 4" rubber coupler is 4" long with a 4" ID.
$10.99
…system with this 4" starter kit. Y-fittingsare designed to service more than one machine and provide optimal lateralairflow. Two elbows, two Y-fittings, three Stable Gate blast gates, and twenty 4"hose clamps included. 4" Clear Hose and 4" Expandable Hosesold separately.
$43.99
…where you need it. The ports feature a flexible rubber boot on one side that guarantees a tight connection and allows for slight variations in the size of the tool's dust port. Includes two 4" Dust Right Tool Ports with two metal hose clamps Dust Right Handle
$21.99
…to tool like never before! The Ports feature a flexible rubber boot on one side that guarantees a tight connection and allows for slight variations in the size of the tool's dust port. Includes two ports and two metal hose clamps.
$17.99
(0 Items)