Elbows are necessary whenever ductwork changes direction, such as, from the dust collector to an overhead mainline and when connecting individual machines to branch lines. Available for both 2-1/2" and 4" hose.
From $4.99
…around corners without compromising power or efficiency. The rubber boot provides a tight seal around your dust collection system input as well as to any 4" hose, giving you a leak-free portal toward a cleaner shop. Includes two metal hose clamps
$12.99
Fastens directly to your shop tool to save space. 4" Elbow with 4-5/8" square flange mount. Hose clamp required.
$9.99
Allows you to connect two 4" or 2-1/2" fittings together without the need for additional hose or hose clamps. Example: connect an elbow fitting to a Y-fitting. 4" Coupling has 4" ID on each to accept 4" OD fittings. Plastic. 2-1/2" Coupling has 2-1/2" ID on each to accept 2-1/2" OD fittings.
From $1.99
Separate large wood chips out of your system before they reach your dust collector. Twopair of plastic elbow and coupler components serve as infeed and outfeed points whenyou install them on either end of a box, bin or other fixture you wish to use to catchlarge wood chips. This system will save wear…
$20.99
Connects Schedule 20 PVC to standard 4" dust collection fittings, such as elbow connectors. Requires silicone adhesive to seal (not included). Schedule 20 (PVC sewer pipe) is thin walled PVC pipe commonly found at home centers.Note regarding Schedule 20 PVC: The term "Schedule 20" merely refers to the…
$7.99
For use with the RapidAir Maxline 3/4" Compressed Air Piping System (sold separately). Both ports are compression fittings, which join 3/4" Maxline tubing (sold separately).
$15.99
A smooth 90 bend for flush railing. Features a 1" long sleeve for added strength and adhesive coverage. (Note: Hand rail fittings are supplied with self-drilling / self-tapping hardware.)Measurements (for use with 1-1/2" inch tubing):width(W): 2-1/4"length(L): 2-1/4"Measurements (for use with 2"…
From $15.49
Finish:Statuary BronzeBase Material:SteelLength:1-3/8"Width:1-1/4"Projection:1"Center to Center Hole Spacing:5/8"Machine Screw Thread Size:#8-32Screws are includedWarranty:Lifetime
$1.83
…-machine dust collection system with this 4" starter kit. Y-fittingsare designed to service more than one machine and provide optimal lateralairflow. Two elbows, two Y-fittings, three Stable Gate blast gates, and twenty 4"hose clamps included. 4" Clear Hose and 4" Expandable Hosesold separately.
$43.99
A two-step process involving lots of elbow grease boiled down into just 3-4 easy coats! This shellac and resin blended polish brushes on for quicker build-up, and it's clear, so you can put on as many coats as you like and it won't obscure the grain. Quick-drying means less time waiting around between…
$26.99
…Nordfab Quick-Fit dust collection system is available in four sizes. All of these branches create 30 angles in your ducting system. The listed dimension for each branch below states the diameter of all three openings. If transitioning to smaller elbows or pipe, you'll need a Nordfab Reducer.
From $107.19
(0 Items)