The DELTA RS830 includes stand, 1-1/2 HP, 120/240 Volts motor, automatic blade brake, 10" saw blade, blade wrenches, instruction manualCast-iron track, column and column support for rigidity and continued accuracy.Depth-of-cut control handle and locking levers are positioned above the table for…
$1,649.99
Add a distinctive look to drafting tables as shown, or on the inside of chests and boxes for a lid support. Knob tightens at any point along the 10" arm. Base is 3/4" wide x 2-1/4" long. Screws included. Made from solid brass with a polished, lacquered finish.
$25.19
Simple elbow jointed arm is easy to install. Short arm is 5" and long arm is 6". Made of brass-plated steel. Price for each. Great for straight or slant front secretaries.
From $10.39
The Overarm Dust Collection Assembly provides a simple and unobtrusive method to remove dust from your SawStop CNS Table Saw. Compatible with all SawStop sawsFits all SawStop rail and table lengthsConnects directly to SawStop's dust collection blade guardCustom Y-Port unites above and below-table…
$199.00
Rear-mounted control arms lend a clean, modern look to your wooden shutters, and this jig makes it easy to drill the necessary holes without splitting. The kit includes a jig and a self-centering drill bit. Just slip the jig over the end of the louver, and use the bit to drill a perfectly placed pilot…
$25.99
Universal swing arm style features a wide range of motion to view 26"-45" displays weighing up to 75 lbs. Centris Fingertip Tilt provides smooth adjustment in all directions and self-adjusts for different display weights. Mounting is simple with the teardrop hole pattern, and tension at pivot points…
$249.99
Arm-R-Seal topcoats are made with only the highest quality urethane resin, making them extremely durable and long lasting.Choose from Satin, Semi-Gloss and Gloss.Available in Pint, Quart and Gallon sizes.
From $12.59
…dimensioned to rout the "mouse hole" into the top rail of your hand-made shutters. The mouse hole is a small open-ended mortise that the shutter control arm swings into when the louvers are closed. Simple to use with a standard 1-3/8" template guide, just clamp and rout. The sturdy transparent jig makes it…
$14.99
Tailor a power, voice and data system to your needs!Choose from three power stations that conveniently lift up and hide away when not in use.Ideal for the conference room or your home/office work station.
From $28.49
…ergonomics and relief that the Planex Drywall Sander Support Harness provides. Much like a hiker's backpack, it transfers the weight away from your arms, and into your hips for maximum efficiency and minimum fatigue. The included extension pole slips into the pouch that dangles from the hip strap. Comes…
$215.00
…fingers. A speed adjustment screw lets you control the rate of descent. Support opens drop front to a maximum angle of 90. They have nickel plated steel arms with umber colored plastic housing.
$24.69
…belt TRACKERS dramatically reduce the need for manual belt adjustments 22" wide suspended drum is supported on both ends with a truss-like carriage arm for greater strength and easy alignment to the table surface for consistent performance Sealed and permanently lubricated drum ball bearings for longer…
$2,649.99
This heavy-duty blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may occur. The…
From $54.97
This fast-cutting blade is ideal for a perfect finish on one side of laminates and melamines. The Perma-SHIELD® coating makes these blades resistant to friction and heat build-up. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. The 10 hook angle and a triple…
From $85.97
This multi-purpose blade will cut stacks of manmade wood products as well as hardwood and softwood up to 2-3/4" thick. The blade's deep gullets and TCG rip and crosscut through hardwoods and softwoods with ease. Although the ideal working range is 1/2" to 2-3/4" thick, thinner or thicker materials…
From $68.47
This superior blade gives glass-smooth finishes when crosscutting hard and soft woods, so no sanding is required. What makes this blade so special is the unique side grinding of each tooth. The teeth actually polish the material as it cuts. New laser-cut anti-vibration that resonates in standard…
From $71.47
In many woodworking shops, one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip…
From $71.47
This heavy-duty, non-ferrous metal cutting blade produces an excellent finish. These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life. Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40…
From $74.97
In many woodworking shops, one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip…
From $61.97
This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut. These blades are precision balanced and can be used in gang-rip operations. The ideal working range is from 3/4" to 2-…
From $57.47
This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut. These blades are precision balanced and can be used in gang-rip operations. The ideal working range is from 3/4" to 2-…
From $51.47
This heavy-duty production blade produces an excellent finish on the top and bottom of thick laminates and melamine. The LU92M series is ideal for cutting stacked 3/4" laminates and melamine. Each tooth has a special modified triple chip grind design created by computer simulation to breeze through…
From $69.47
The ultimate combination blade is now available in a thin kerf design with Freud's LU83R. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-…
From $49.97
This thin kerf blade produces glass smooth surfaces when crosscutting hardwoods and softwoods, thanks to Freud's unique side grinding technology. The larger blades are ideal for miter box applications. Thin kerf blades remove less material than standard carbide blades, thus requiring less…
From $57.47
(0 Items)
