Add a new level of accuracy to your band saw! Designed by band saw expert Mark Duginske, this fence provides an unprecedented level of rigidity, adjustability and precision.
From $107.00
Rip Fence with resaw for 14" Jet Bandsaws. Positive locking assembly slides along rail with low-friction plastic contact points for smooth, easy adjustments. Miter gauge pivots 30 left or right to facilitate angled cuts. Includes 6" x 1" diameter resaw attachment for added versatility. Compatible with…
(Reg. $161.99)
Now $99.99
SAVE $62.00!
…level of control when adjusting for band saw blade drift. Curved face of the guide helps steer board into the cut. Easily attaches to the face of the band saw fence. This 7" Resaw Guide is designed for larger capacity band saws. Use with Kreg Precision Band Saw Fence (26186).Incredibly durable anodized…
$19.99
Resaw guides provide a higher level of control when adjusting for band saw blade drift. Curved face of the guide helps steer board into the cut. Easily attaches to the face of the band saw fence. Use with Kreg Precision Band Saw Fence (26186) Incredibly durable anodized aluminum 4-1/2" Tall for small…
$17.99
Works great for table saws, band saws, cutoff saws, router fences and more! These compact, lightweight Fence Clamps allow you to secure a huge variety of shop-made auxiliary fences to your existing fences without having the clamp interfere with your work. The clamp arm simply fits into a 3/8" hole in…
(Reg. $19.49)
Now $14.99
SAVE 23% TODAY!
…slot on your table saw, router, bandsaw, and more.Fits most 6" calipersConnects and disconnects to your caliper in secondsCan be used in a variety of 3/4" table slots or clamped or screwed to a flat surfaceEnables fast and precise measuring using a fixed pointUse it to check fence squareness against…
$8.99
…the angle gauge to any reference surface so there's no need to worry if your table saw isn't leveled perfectly. Works great for miter saws and table saws, and for setting the angle of your jointer fence and band saw table.
$39.99
…table or cast Iron fence. Features a dual set of roller bearing supports for firm yet smooth gliding of wood through a blade. Includes micro adjustment for fine tuning to 90 degrees. Ideal for re-sawing on band saws, a second hand to support raised/long or tall panels on table saws, general in-feed out…
$41.99
…Features core advantages of Magswitch including fast, strong set up anywhere on a steel table or cast Iron fence. Angled Infeed/Outfeed to allow for blade drift adjustment. Ideal for resawing on band saws, oscillating spindle sander, or disc sander; and for infeed/outfeed support.
$36.79
…edge of the protractor, it's especially handy for cast iron power tools such as table saws, band saws, jointers and more-simply set it in place and it automatically references itself to the table, blade and/or fence. Perfect as a digital angle finder for finding and transferring angles, for layout work…
$63.99
The all-new JWBS-14DXPRO 14" Deluxe Bandsaw from JET (shown here with optional fence) has been fully redesigned to meet the needs of today's most demanding woodworkers. Gone are the days of adding a riser block; this 14" bandsaw comes with a massive cast iron frame for increased power that makes it…
$999.99
…Great for reinforcing a fence anywhere on a steel table!90 corners for squaring.Switches in and out of fixtures with ease.Does not included Resaw Guide shownMagsquares allow for the attachment of all types of fixtures, or shop made jigs for quick connect/disconnect on bandsaws, tablesaws, drill presses…
$60.99
…what you'll get for your bandsaw when you get this Laguna Driftmaster Fence System. Quick-set wheel allows for fast and easy tool-free drift adjustment31-1/2" aluminum extrusion for superior infeed/outfeedIncludes universal mounting brackets for easy installation on most bandsaws
$395.00
The Magswitch Pro Fence Featherboard is perfect for holding wood down on any steel woodworking table tool fence. Features two on/off Magswitches with 150lb/67kg holding force each. Use for right side feed on Table Saw or Band Saw blade. Low profile. Precise easy tensioning.
$67.19
This 18" bandsaw has been a leader since it's introduction many years ago. Now upgrades with new attractive styling and a three position quick tensioner it will again pull ahead of the competition. Triangular design frame provides superior column rigidity 12-1/4" Resaw capacity for cutting large pieces…
$1,784.99
8" high fence is compatible with the Laguna Driftmaster Fence System (sku: 42048).
$155.00
…Band Saw. If space is at a premium in your shop or on the job, bring this bandsaw along to tackle your toughest jobs. With quick release blade tension, upper and lower ball bearing blade guides, an extra large cast iron tilting table, and a easily adjustible LED worklight - this precision bandsaw has…
$374.99
…than the cost of one pre-cut plate! Just rout to the size you need with a Shear Cutting Flush Trim Bit (24740). Also works great for band saws, scroll saws, jigs and fences. Phenolic is extremely hard for optimum durability and provides friction-free sliding. It's so hard, that traditional drill bits have…
From $31.99
Precision micro-adjuster lets you dial in precise adjustments on the Kreg Precision Band Saw Fence (26186) - down to .005" - with the simple turn of a thumb wheel.
$14.99
Compact size makes this the most affordable Incra miter gauge ever!Engineered to provide high performance for your table saw, band saw, router table, disk sander, belt sander or any other tool in need of a better miter gauge.
$67.99
…" Bandsaw has a powerful, totally enclosed, fan-cooled motor to keep dust out for longer life and maximum performance. An extra large cast iron table offers more work area in front of the blade. The table tilts 45 to the right and 10 to the left and comes standard with T-slot miter gauge. The saw blade…
$5,569.99
…removable and can also be used in your own jigs and fixtures.Accepts all Magswitch Workholding System AccessoriesSmall footprint to work on band saws, fences, and small tablesMagswitch Vertical Featherboard Attachment w/Risers is recommended to add a dimension of dual work hold (sold separately)
$74.99
…Magnetic Base adheres to any ferrous surface, and clamps to the shaft of your dial caliper, allowing you to use it as a basic setup gauge on table saws, band saws, drill presses and more. Also great for checking runout on blades and bits.
$10.49
The new PM1800 Bandsaw is a part of the new breed of high performance products from Powermatic - the Gold Standard since 1921. Designed with an enormous 18" resaw, multi-step blade tension, precision blade guides, and a 5HP motor hungry for hardwoods, this powerhouse comes standard with all the extra…
$4,794.99
…" Bandsaw has a powerful, totally enclosed, fan-cooled motor to keep dust out for longer life and maximum performance. An extra large cast iron table offers more work area in front of the blade. The table tilts 45 to the right and 10 to the left and comes standard with T-slot miter gauge. The saw blade…
$4,650.99
(0 Items)