…Bandsaws. Positive locking assembly slides along rail with low-friction plastic contact points for smooth, easy adjustments. Miter gauge pivots 30 left or right to facilitate angled cuts. Includes 6" x 1" diameter resaw attachment for added versatility. Compatible with 15" x 15" Jet bandsaw tables.
(Reg. $161.99)
Now $99.99
SAVE $62.00!
…little more than the cost of one pre-cut plate! Just rout to the size you need with a Shear Cutting Flush Trim Bit (24740). Also works great for band saws, scroll saws, jigs and fences. Phenolic is extremely hard for optimum durability and provides friction-free sliding. It's so hard, that traditional…
From $31.99
Add a new level of accuracy to your band saw! Designed by band saw expert Mark Duginske, this fence provides an unprecedented level of rigidity, adjustability and precision.
From $107.00
The PWBS-14CS Bandsaw has an extra large, two-piece cast iron table. It consists of a 15" x 15" tilting section and a fixed 15" x 5" extension for a total working surface area of 15" x 20". A balanced, nine-spoke cast iron wheel makes for smooth blade travel, and a Carter™ quick tension release lever…
$1,199.99
…Connects quickly and easily to any caliper and fits in the 3/4" slot on your table saw, router, bandsaw, and more.Fits most 6" calipersConnects and disconnects to your caliper in secondsCan be used in a variety of 3/4" table slots or clamped or screwed to a flat surfaceEnables fast and precise measuring…
$8.99
…hook on your table saw for wrenches and push sticks? Problem solved: just twist the hook and it grabs on tight. Attach it to ferrous wall or ceiling surfaces or use it under your car for the utility light. You can even use it as a stop block for stopped cuts on the table saw, band saw or jointer. And…
$47.29
Huge urethane casters steamroll over cracks, cords and more! And with a rugged 800-pound load capacity, kick-action wheel locks, and an expandable steel frame, this heavy-duty base will transform almost any stationary tool into the ultimate portable workstation. Patent Pending.
From $206.99
…reinforcing a fence anywhere on a steel table!90 corners for squaring.Switches in and out of fixtures with ease.Does not included Resaw Guide shownMagsquares allow for the attachment of all types of fixtures, or shop made jigs for quick connect/disconnect on bandsaws, tablesaws, drill presses or other ferrous…
$60.99
Resaw guides provide a higher level of control when adjusting for band saw blade drift. Curved face of the guide helps steer board into the cut. Easily attaches to the face of the band saw fence. Use with Kreg Precision Band Saw Fence (26186) Incredibly durable anodized aluminum 4-1/2" Tall for small…
$17.99
…magnet is extremely strong and adheres to any ferrous metal surface, keeping your cords at a manageable height. Holds up the cords on your table saw, scroll saw, band saw, or use one to keep a pencil handy! Measures 1-1/2" in diameter and 7/8" thick.
$7.99
…Band Saw. If space is at a premium in your shop or on the job, bring this bandsaw along to tackle your toughest jobs. With quick release blade tension, upper and lower ball bearing blade guides, an extra large cast iron tilting table, and a easily adjustible LED worklight - this precision bandsaw has…
$374.99
Compact size makes this the most affordable Incra miter gauge ever!Engineered to provide high performance for your table saw, band saw, router table, disk sander, belt sander or any other tool in need of a better miter gauge.
$67.99
…simple but strong bandsaw that is perfect for the home shop. It features very little setup when you first get it home but will promise years of solid heavy duty use. You won't regret buying this one! 6" depth resaw capacity for cutting larger pieces of wood15" x 15" offset cast iron table gives you more…
$749.99
…Pro Fence Featherboard is perfect for holding wood down on any steel woodworking table tool fence. Features two on/off Magswitches with 150lb/67kg holding force each. Use for right side feed on Table Saw or Band Saw blade. Low profile. Precise easy tensioning.
$67.19
…the angle gauge to any reference surface so there's no need to worry if your table saw isn't leveled perfectly. Works great for miter saws and table saws, and for setting the angle of your jointer fence and band saw table.
$39.99
Small and sturdy, this free-standing magnetic square takes the effort out of squaringup your table saw, band saw, and other equipment. Two powerful neodymiummagnets are embedded in the oversize base to keep it anchored to your cast-irontable for hands-free operation. Standing less than 4-1/2" tall, it…
$22.99
…). Features core advantages of Magswitch including fast, strong set up anywhere on a steel table or cast Iron fence. Angled Infeed/Outfeed to allow for blade drift adjustment. Ideal for resawing on band saws, oscillating spindle sander, or disc sander; and for infeed/outfeed support.
$36.79
…standard miter slots to secure tall stock for safe, clean cutting. Great for edge routing tall panels, resawing stock on the band saw, or ensuring chatter-free cuts on the table saw. Ergonomic T-knobs make for comfortable adjustment.Heel-end can also be used as a stop.Built-in setup feather makes setting…
$37.79
Precision micro-adjuster lets you dial in precise adjustments on the Kreg Precision Band Saw Fence (26186) - down to .005" - with the simple turn of a thumb wheel.
$14.99
The 24" Bandsaw has a powerful, totally enclosed, fan-cooled motor to keep dust out for longer life and maximum performance. An extra large cast iron table offers more work area in front of the blade. The table tilts 45 to the right and 10 to the left and comes standard with T-slot miter gauge. The…
$5,569.99
This 18" bandsaw has been a leader since it's introduction many years ago. Now upgrades with new attractive styling and a three position quick tensioner it will again pull ahead of the competition. Triangular design frame provides superior column rigidity 12-1/4" Resaw capacity for cutting large pieces…
$1,784.99
The 20" Bandsaw has a powerful, totally enclosed, fan-cooled motor to keep dust out for longer life and maximum performance. An extra large cast iron table offers more work area in front of the blade. The table tilts 45 to the right and 10 to the left and comes standard with T-slot miter gauge. The…
$4,819.99
The 20" Bandsaw has a powerful, totally enclosed, fan-cooled motor to keep dust out for longer life and maximum performance. An extra large cast iron table offers more work area in front of the blade. The table tilts 45 to the right and 10 to the left and comes standard with T-slot miter gauge. The…
$4,650.99
The 24" Bandsaw has a powerful, totally enclosed, fan-cooled motor to keep dust out for longer life and maximum performance. An extra large cast iron table offers more work area in front of the blade. The table tilts 45 to the right and 10 to the left and comes standard with T-slot miter gauge. The…
$5,278.99
Cut with the power and accuracy of a table saw with Laguna Tools' LT14 SUV Bandsaw! Built tough to handle all your resawing needs with a powerful 3HP Leeson motor and a 14" resawing height. Shown with Bandsaw Mobility Kit (sold separately).Cast iron table Rack and pinion adjustment for the upper guide…
$1,595.00
(0 Items)