…dovetails, mortises,dadoes and more. Quickly quantify table saw runout and measure the flatness of yourblade. Interchangeable 1" and 2" measuring bars included.
(Reg. $20.99)
Now $12.49
SAVE 40% TODAY!
Kreg ensures your project measurements are on-the-mark exact! 3-in-1 bars act as a step gauge, depth gauge, and fence gaugeSeven set-up bars from 1/8" to 1/2"Durable plastic storage case
$41.99
…conventional systems, and the four-sided knife inserts seat themselves without requiring a set-up gauge. The 5" dust port connects easily to any dust collector. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. The solid cast iron base…
$4,284.99
…joints or thickness planing with a router, addinga Dovetail Miter Bar to your jig will increase accuracy and reduce production time. The uses of this one are limited only by your imagination. Sold in 18" or 24" lengths, the Dovetail Miter Bars can easily be cut shorter if needed.
From $16.99
Prevents kickback by keeping saws aligned, tuned up and calibrated to with in a thousandth of an inch!
$89.29
…and tight-fitting, low-friction operation with this premiummiter gauge. Laser-cut AngleLOCK stops in 1 increments from +/- 60 (plus specialstops at +/- 22.5) give you ultra-fine precision across the board, while a GlideLOCKmiter bar adjusts for a no-slop fit in any standard miter slot.
$84.99
…precision at any angle! This high definition gauge has 180 positivestops for pin-point accuracy at every degree (with special stops at +/-22.5), plus amicro-adjustable vernier scale for fine-tuning to 1/10. Add to that the industry'ssmoothest adjustable miter bar, a telescoping fence, a premium dual-arm…
$189.99
…featherboards, hold-downs and special jigs to your table saw, router table, disc sander or any other tool with a standard 3/4" wide x 3/8" deep miter gauge slot.
$7.99
…bar tool allowing you to focus on your work, and safely turn hollow forms and bowls using your own gouges and scrapers. The fully sealed bearing lubrication eliminates drag on the bar, giving you more control and a smoother flowing motion as you manipulate your turning tools. Constructed of heavy-gauge…
$358.99
…-clearance workpiecesupport for safe, splinter-free cuts. The 1/2" thick MDF platform features a smoothslidingmelamine surface and a locking aluminum miter bar. Use only with our Crosscut Sled for Portable Table Saws.
$28.99
…pattern to your saw or jointer, or as a marking gauge. It's graduated from 0 to 180 in both directions so you can quickly convert inside angles to outside angles. Simple to use; just loosen the knob to adjust. The anchored lock washer prevents the bar from shifting as it's tightened. Deeply etched scale…
$18.99
Set up your jigs for smooth-sliding action on table saws, router tables, workbenchesand more! These solid aluminum bars have nylon set screws in the miter bar thatadjust in or out for a perfect fit in any standard 3/4" x 3/8" miter slot. Availableindividually in 18" or 24" lengths.
From $19.99
Set up your jigs for smooth-sliding action on table saws, router tables, workbenches and more! This 36" Solid Aluminum Miter Bar has nylon set screws in the miter bar that adjust in or out for a perfect, no-slop fit in any standard 3/4" x 3/8" miter slot.
$26.99
Eliminate difficult and time-consuming setup operations while maintaining accuracy and repeatability! Extruded aluminum miter bar has adjustable aluminum runner for perfect sliding action and can be locked in place for stationary table saw and router table jigs.Available in 24" and 18" lengths.Works…
From $18.59
Perfect for bar stools, smaller TV sets and more, this swivel delivers smooth rotation and holds its position well. Note: It is recommended that #14 gauge pan head (self-tapping) screws be used for mounting. If greater strength is needed, mount swivel plates with machine bolts and nuts through the base…
$20.99
…conventional systems, and the four-sided knife inserts seat themselves without requiring a set-up gauge. The 5" dust port connects easily to any dust collector. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. The solid cast iron base…
$4,284.99
…collector. The cutterhead has four high speed steel knives and turns at 5,000 RPM producing 20,000 cuts per minute. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. The solid cast iron base, table and head are designed for production. The…
$2,839.99
…collector. The cutterhead has four high speed steel knives and turns at 5,000 RPM producing 20,000 cuts per minute. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. The solid cast iron base, table and head are designed for production. The…
$2,854.99
(0 Items)