…excellent workability, Cherry continues to gain popularity for use in fine furniture and cabinets. The wood leaves the sawmill with a pinkish, rosy tone, and continues to darken over years to a deep, lustrous red. The narrow sapwood has a creamy color, similar to Hard Maple. Cherry is easily worked with…
…lumber on this page is offered at a price per lineal inch. To order, check the box next to one or more desired dimensions of lumber and click "Add to Cart." This will take you to Rockler's Lumber/Veneer Configurator, where you will be able to specify the quantity and lineal dimensions of the lumber…
Please Note: The 3/4" Thick Cherry Lumber - Special Offer - is a "Select & Better, Red 1 Face Grade" lumber and may contain sap wood and pitch pockets. Contains no loose knots. The 1/8", 1/4"and 3/8" domestic species are premium grade stock. NOTE:The lumber on this page is offered in random widths from…
High quality A2 grade veneer core plywood. High quality A2 grade veneer core plywood. The front and back of this precut plywood are the same species. Available in 24" x 32" sizes. Available in 1/8", 1/4" and 3/4" nominal thicknesses.
Save time and money with edge-banding strips! Thicker, more durable edge allows you to shape the edge using various router bits. Plus, pieces are planed to eliminate having to scrape or sand out saw kerf marks.
This beautiful lumber will fit the bill for a variety of projects. Characteristic soft and warm color combines with attractive curly flame patterns to give an elegant appearance to your final product. Available in dimensions listed.
With its unique reddish-pink hues and superb finishing quality, Cherry is one of the most desirable turning species. One of the most consistent quality hardwoods, it is a fine choice for projects with multiple pieces. A natural sheen and beautiful grain delivers display-worthy results.
…and technical properties, and has an appearance similar to that of cherry and mahogany. The superior quality and remarkable beauty of Lyptus make it the ideal hardwood for furniture, cabinets and architectural millwork.NOTE: The lumber on this page is offered in random widths from 3" to 6" and is priced…
High quality A2 grade veneer core plywood. 3/4" Thickness x 24" wide x 32" long.
Most of this gorgeous curly cherry falls into the best available FAS lumber grade. And while the amount of figure varies slightly from board to board, it all impresses with interesting patterns throughout. Similar to standard cherry, curly cherry is a popular choice for cabinetry, but its uses also…
A massive selection of premium veneers, all carefully sequence-matched, and neatly packaged in 3-Square-Foot hobby packs, an ideal size for jewelry boxes, humidors, door panels, marquetry and more. Scroll down to see our full selection of exotic veneers. Also available in exotic, burls, and dyed…
The fine grain, deep red color and attractive dark speckling of Red River Gumburls have made them a favorite choice for decorative turnings and sculpture.The wood is also strong, durable and termite resistant. These turning blanksare available in a range of sizes for small bowls, platters, carvings,…
Fastedge is a peel & stick edgebanding made with high performance, ultra-bond PSA adhesive. It is fast, easy, super strong and increases in strength over time. Simply peel off the liner, stick, roll and trim and you are done!
Save time and money! When you buy this veneer there's no waste because it has straight, parallel edges and no defects. Unfinished real wood veneer is bundled in consecutive sheets for book matching and readily accepts stains and finishes. Widths vary from 5" to 9". Total 10 square feet per package.
…easily and can add beauty and strength to any project. Each piece is smoothly machined and sanded, then laminated. Your choice of Maple, Oak, or Cherry in 2-1/2" or 3" diameters. All rods are 30" long.
Table Leg Turning Blanks, 3" x 3" x 36"These premium table leg blanks are cut from thick, clean stock, with no glue seams. They can be turned, tapered or shaped to your specifications - or you can simply sand and finish them for a basic rectangular table leg. Available inseveral species (see below).
Our clean and simple "peel-and-stick" veneers are now available in convenient 24"x 32" sheets. The 32" lengths are great for doors, face frames and end panels onvanities as well as on standard base cabinets with a toe space. Our 96" lengths are stillavailable for tall cabinets and uppers. No messy…
Use these solid hardwood screw hole buttons for covering screw holes. The buttons are available in birch, oak, cherry, and walnut and can be stained or painted to suit your project. They can be glued or press fit into screw holes. Available in 1/4", 3/8", 1/2", and 3/4" diameter. Sold in packs of 10…
…your own dowels for joinery or use the long lengths for chair rungs and other furniture components. These dowel rods are made of the finest quality cherry, smoothly sanded and kiln-dried for optimum stability and straightness. All dowel rods are 36" long and have a tolerance of +/- 1/64". Diameters range…
…Thicknesses may range from 1/8" to 1-3/4" pieces. 20 lbs. mixed species assortment contains at least 4 of the following species: Oak, Maple, Birch, Cherry, Walnut and Mahogany. Maple and Oak assortments include 20 lbs. of specific species in variety of sizes noted.
A wide selection of premium veneers, all carefully sequence-matched so the grain flows from one panel to the next. Neatly packaged in 12-Square-Foot hobby packs, an ideal size for jewelry boxes, humidors, door panels, marquetry, luthiery and more. Scroll down to see our full selection. All veneers…
…ideal for turning spindles, finials, bun feet or for carving projects. The stock is approximately 2" square and available in two lengths. Choose from cherry, maple, oak, or walnut. May include sap wood.
The 36" X 96" size is ideal for veneering.Unfinished real woodAccepts stains and finishes
Easy to install, these Cherry Shaker Pegs have been authentically reproduced and come sanded and ready to finish. Attach easily with glue, using the 3/8" diameter tenon.
Our premium two ply veneers are now available in convenient 24" x 32" sheets. The32" lengths are great for doors, face frames and end panels on vanities as well as onstandard base cabinets with a toe space. Our 96" lengths are still available for tallpieces and upper cabinets.