For those looking for plug-and-play simplicity in a CNC router, look no further than the Click-N-Carve BE2015. Affordable, accessible and intuitive, the Click-N-Carve is the very definition of easy-to-use: simply load your photo, close the lid, and with only a few clicks, the BE2015 will be quietly…
$1,599.99
…carvings, engravings, and lithophanes. The 4mm shank fits both Click-N-Carve CNC models (49449 and 49490, sold separately). Solid carbide for a long life and the cleanest possible cut.NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also…
From $24.99
With just a few clicks, the Click-N-Carve BE3030 CNC Router will have you churning out carvings and engravings with the ease of a printer! Boasts all of the plug-and-play simplicity of its little brother, the BE2015, plus an 80 watt spindle for more power, and a larger bed for more capacity. Simply…
$2,199.99
…and are available in two sizes. The 11.8" x 7.9" sheets are for use with the BE3030 Click-N-Carve CNC Carving Machine, while the 7.32" x 5.31" sheets can be used with either the BE3030, or the BE2015. Most other CNC machines will accept both sizes, but check the capacity on your machine. If your carving…
From $29.99
…hold-downs are available separately). It is fully compatible with the Bosch Colt Palm Router and includes a 1/2" diameter V-groove router bit. The CNC Shark also includes the new version (7.0) of the VCarve Pro w/Cut 3-D software package - over $900 value. You supply a PC computer with USB 2.0 port and…
$2,899.99
…for superior chip ejection, and the 4mm shank fits both Click-N-Carve CNC models (49449 and 49490, sold separately). Solid carbide for a long life and the cleanest possible cut.NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also…
$49.99
The CNC Shark Touch Probe attaches to the router in any CNC Shark® Routing System to trace objects down to 0.001" detail allowing the user to import image data for replicating objects, shapes and patterns. Requires Cut 3D Software or similar software to be used with the CNC Shark models. Touch Probe…
$299.99
…wide array of proprietary Click-N-Carve CNC Router Bits with the larger CNC Shark line of routers, as well as any other CNC router or handheld router with a 1/4" collet. It reduces the collet opening from 1/4" to 4mm to accept the smaller Click-N-Carve shank. The Click-N-Carve selection offers many unique…
$6.99
This is a replacement silicone mat for the BE3030 and BE2015 Click-N-Carve CNC Carving Machines. The mat measures 5-1/2" x 7-1/2", the ideal size for securely holding wood, as well as ABS plastic and acrylic carvings sheets.
$29.99
…and take on a sepia tone when backlit. They are sold in packs of ten, and can be used with either the BE3030, or the BE2015 Click-N-Carve CNC Carving Machines. Most other CNC machines will accept both sizes, but check the capacity on your machine.function MM_preloadImages() { //v3.0 var d=document;…
$29.99
The Shark HD 2.0 CNC Machine features enhanced electronics for smoother movement, more power and 50% more speed to the motors. The HD 2.0 is built to handle larger sized routers such as the Porter Cable 890 series. To accommodate the greater torque levels, it features adjustable bearings to give more…
From $3,999.99
…carvings, engravings, and lithophanes. The 4mm shank fits both Click-N-Carve CNC models (49449 and 49490, sold separately). Solid carbide for along life and the cleanest possible cut.NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also…
$39.99
…cuttingedge for superior chip ejection, and the 4mm shank fits both Click-N-Carve CNCmodels (49449 and 49490, sold separately). Solid carbide for a long life andthe cleanest possible cut.NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also…
$24.99
…patterns and less fine detail. The ABS sheets are sold in packs of ten, and can be used with either the BE3030, or the BE2015 Click-N-Carve CNC Carving Machines. For other CNC machines, check the capacity on your machine.
$19.99
…destroy an aluminum or MDF machine.It is fully compatible with the Bosch Colt Palm Router and includes a 1/2" diameter V-groove router bit. The CNC Shark also includes the new version 7.0 of the VCarve Pro software interface - a $600 value. You supply a PC computer with USB 2.0 port and a Bosch Colt…
$3,799.99
…with the CNC Shark Models andCNC Shark Touch® Probe to process image data into formatted programs that the Shark can read and execute as three dimensional carvings.Cut 3-D Software is compatible with the following machines:CNC Shark Routing SystemCNC Shark Pro Plus Routing SystemCNC Shark HD 2.0 Routing…
$314.99
Now you can get your CNC Shark to eat as much dust as it creates. With the included magnetic plate installed on your CNC Shark, the Dust Boot itself pops on and off with almost no effort. The brushes encircle the router bit, and conform to the workpiece for the tightest possible seal, while still allowing…
$89.99
…the CNC Shark! The touch plate automatically zeroes out the z-axis of your CNC Shark - just plug it into the controller and lower the bit onto the plate. The instant the bit makes contact, the router will zero itself out. Made in USA.Touch Plate is compatible with the following machines:CNC Shark Routing…
$89.99
Now you can get your CNC Shark HD 2.0 to eat as much dust as it creates. With the included magnetic plate installed on your CNC Shark HD series machine, the Dust Boot itself pops on and off with almost no effort. The brushes encircle the router bit, and conform to the workpiece for the tightest possible…
$89.99
…CNC Shark controller, this set of brackets attachesto the underside of your bench or table, providing a secure, accessible homefor your CNC controller. The Controller Bracket is made of steel, and includesmounting hardware for easy installation. Also available from Rockler, the complete Rockler CNC…
$19.99
…spacious top, and included controller storage, this table serves nicely as mission control for all things CNC. At 28" x 40", it's large enough to accommodate any CNC Shark, as well as most other consumer CNC routers. Your controller hangs conveniently below the table in a saddle-shaped bracket, and is easy…
$249.99
Achieve fine detail for several delicate flush cutting operations. Flexible 6-1/2" bladehas 26 TPI and cuts on the pull stroke, giving you maximum control for dovetailing,doweling, crafting and more. Diamond ground teeth are electrically hardened toimprove longevity. Blade is easily removed with a…
$16.99
Put power and precision in the palm of your hand!While it may look like a laminate trimmer, this compact (7-1/2" high) and lightweight (3.3 lbs.) router is more than shop-worthy with a 1.0 HP (max.), 5.7 amp motor - the highest rating in its class.16,000-35,000 RPM.
$129.99
The perfect steel stand for your CNC Shark, workbench, assembly table ormachining station. Legs and stretchers are pre-drilled to easily add sides,bottom and hinged doors for a built-in cabinet and have square holes for easyassembly with carriage bolts. Legs are heavy-duty 1/8" steel, with adjustablelevelers…
$159.99
…table. It also works well as a table top for theShark line of CNC routers. Pair it with your own shop-built base cabinet, or withour 24"W x 36"L Shop Stand (48089, sold separately). Also available from Rockler, the complete Rockler CNC Table w/Stand and Controller Brackets.
$99.99
(0 Items)