…carvings, engravings, and lithophanes. The 4mm shank fits both Click-N-Carve CNC models (49449 and 49490, sold separately). Solid carbide for a long life and the cleanest possible cut.NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also…
From $24.99
…for superior chip ejection, and the 4mm shank fits both Click-N-Carve CNC models (49449 and 49490, sold separately). Solid carbide for a long life and the cleanest possible cut.NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also…
$49.99
…damage or destroy an aluminum or MDF machine.It is fully compatible with the Bosch Colt Palm Router and includes a 1/2" diameter V-groove router bit. The CNC Shark also includes the new version 7.0 of the VCarve Pro software interface - a $600 value. You supply a PC computer with USB 2.0 port and a Bosch…
$3,799.99
…cuttingedge for superior chip ejection, and the 4mm shank fits both Click-N-Carve CNCmodels (49449 and 49490, sold separately). Solid carbide for a long life andthe cleanest possible cut.NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also…
$24.99
…Produce beautiful decorative grooves in molding and furniture with these bits or use them with an edge guide to create decorative edge profiles. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable…
$38.47
…single-sided veneers and laminates. Freud's solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable…
From $50.97
…bit for pattern routing because the best face goes down while cutting, with templates attached to the top. 1/2" shank.Application: Cutting mortises and routing deep blind holes Freud's solid carbide up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits.…
From $51.47
…veining. Add a personal touch to cabinet doors, drawer fronts, and fluted millwork, or use these bits to engrave wood signs. Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
From $20.47
…proprietary Click-N-Carve CNC Router Bits with the larger CNC Shark line of routers, as well as any other CNC router or handheld router with a 1/4" collet. It reduces the collet opening from 1/4" to 4mm to accept the smaller Click-N-Carve shank. The Click-N-Carve selection offers many unique router bits, including…
$6.99
…room. Simply adjust the height of your cut to change the entire profile. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers and table-mounted portable routers.
$68.97
Now you can get your CNC Shark to eat as much dust as it creates. With the included magnetic plate installed on your CNC Shark, the Dust Boot itself pops on and off with almost no effort. The brushes encircle the router bit, and conform to the workpiece for the tightest possible seal, while still allowing…
$89.99
…carvings, engravings, and lithophanes. The 4mm shank fits both Click-N-Carve CNC models (49449 and 49490, sold separately). Solid carbide for along life and the cleanest possible cut.NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also…
$39.99
…stock removal with a smooth finish.Freud straight bits cut smoother than other bits because of the precise shear and hook angles.End of bit relief allows for fast plunging.Cuts all composite materials, plywoods, hardwoods, and softwoods.Use on CNC and other automatic routers as well as hand-held and…
From $18.47
The ultimate high-performance straight bit eliminates chipping on both sides of the workpiece. Ideal for pattern routing on double-sided panels, edgework, mortises and more. Solid Carbide. 1/2" shank.Application: Fine finish, chip-free routing indouble-sided veneers and laminates. Combination of up and…
From $81.97
…router bit! Ideal for hinges, mortises, and dadoes. Great for undersized plywood.1/2" Shank7/32" overall diameter1/2" carbide height2-1/4" overall lengthDeep center gullet deliver maximum material removal without chip loadingCuts all composition materials, plywoods, hardwoods, and softwoodsUse on CNC and…
(Reg. $29.97)
Now $19.99
SAVE 33% TODAY!
…the CNC Shark! The touch plate automatically zeroes out the z-axis of your CNC Shark - just plug it into the controller and lower the bit onto the plate. The instant the bit makes contact, the router will zero itself out. Made in USA.Touch Plate is compatible with the following machines:CNC Shark Routing…
$89.99
…slots along the shaft combine with radial grooves at 1/2" intervals to let you to see your progress and measure tenon length while you cut. Body is CNC machined from aircraft aluminum for maximum strength and minimum weight. Available in three sizes (1", 1-1/2", and 2") corresponding to the diameter…
From $272.99
…-035 cuts thinner panels for projects such as humidors and jewelry boxes. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers, as well as table-mounted portable routers.
$108.97
…(additional hold-downs are available separately). It is fully compatible with the Bosch Colt Palm Router and includes a 1/2" diameter V-groove router bit. The CNC Shark also includes the new version (7.0) of the VCarve Pro w/Cut 3-D software package - over $900 value. You supply a PC computer with USB 2.0 port…
$2,899.99
Now you can get your CNC Shark HD 2.0 to eat as much dust as it creates. With the included magnetic plate installed on your CNC Shark HD series machine, the Dust Boot itself pops on and off with almost no effort. The brushes encircle the router bit, and conform to the workpiece for the tightest possible…
$89.99
…eliminatesplintering ideal for hinges, mortises, and dadoes. Freud's Mortising Bits are designed with deep center gullets for maximum material removal without chip loading.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on CNC and other automatic routers as well as hand-held and table-mounted…
From $18.47
Application: Producing joints for projects such as circular planters and canoes. Bit 99-017 cuts the flute and 99-018 cuts the mating bead. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as table-mounted portable routers.
From $49.97
…need to match old, extra-high base moldings. Bits can be used to rout base cap only, or to profile the edge of wide base molding. Choose your favorite wood to suit the room. Use with hardwood or softwood to mill stain grade molding. Use with table mounted, CNC or automatic routers. Note: For best results…
$67.47
…need to match old, extra-high base moldings. Bits can be used to rout base cap only, or to profile the edge of wide base molding. Choose your favorite wood to suit the room. Use with hardwood or softwood to mill stain grade molding. Use with table mounted, CNC or automatic routers. Note: For best results…
$51.47
…moldings. Enhances moldings and furniture with multiple beads and fluting. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
$56.97
(0 Items)