The Shark HD 2.0 CNC Machine features enhanced electronics for smoother movement, more power and 50% more speed to the motors. The HD 2.0 is built to handle larger sized routers such as the Porter Cable 890 series. To accommodate the greater torque levels, it features adjustable bearings to give more…
From $3,999.99
…compatible with the Bosch Colt Palm Router and includes a 1/2" diameter V-groove router bit. The CNC Shark also includes the new version (7.0) of the VCarve Pro w/Cut 3-D software package - over $900 value. You supply a PC computer with USB 2.0 port and a Bosch Colt router (router sold separately). Simply connect…
$2,899.99
For those looking for plug-and-play simplicity in a CNC router, look no further than the Click-N-Carve BE2015. Affordable, accessible and intuitive, the Click-N-Carve is the very definition of easy-to-use: simply load your photo, close the lid, and with only a few clicks, the BE2015 will be quietly…
$1,599.99
With just a few clicks, the Click-N-Carve BE3030 CNC Router will have you churning out carvings and engravings with the ease of a printer! Boasts all of the plug-and-play simplicity of its little brother, the BE2015, plus an 80 watt spindle for more power, and a larger bed for more capacity. Simply upload…
$2,199.99
…compatible with the Bosch Colt Palm Router and includes a 1/2" diameter V-groove router bit. The CNC Shark also includes the new version 7.0 of the VCarve Pro software interface - a $600 value. You supply a PC computer with USB 2.0 port and a Bosch Colt router (router sold separately). Simply connect the…
$3,799.99
…each board for a perfect glue joint. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers, as well as table-mounted portable routers.
$73.47
…engravings, and lithophanes. The 4mm shank fits both Click-N-Carve CNC models (49449 and 49490, sold separately). Solid carbide for a long life and the cleanest possible cut.NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also purchase the…
From $24.99
…with the CNC Shark Models andCNC Shark Touch® Probe to process image data into formatted programs that the Shark can read and execute as three dimensional carvings.Cut 3-D Software is compatible with the following machines:CNC Shark Routing SystemCNC Shark Pro Plus Routing SystemCNC Shark HD 2.0 Routing…
$314.99
…superior chip ejection, and the 4mm shank fits both Click-N-Carve CNCmodels (49449 and 49490, sold separately). Solid carbide for a long life andthe cleanest possible cut.NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also purchase the…
$24.99
…the CNC Shark! The touch plate automatically zeroes out the z-axis of your CNC Shark - just plug it into the controller and lower the bit onto the plate. The instant the bit makes contact, the router will zero itself out. Made in USA.Touch Plate is compatible with the following machines:CNC Shark Routing…
$89.99
…and take on a sepia tone when backlit. They are sold in packs of ten, and can be used with either the BE3030, or the BE2015 Click-N-Carve CNC Carving Machines. Most other CNC machines will accept both sizes, but check the capacity on your machine.function MM_preloadImages() { //v3.0 var d=document;…
$29.99
…and are available in two sizes. The 11.8" x 7.9" sheets are for use with the BE3030 Click-N-Carve CNC Carving Machine, while the 7.32" x 5.31" sheets can be used with either the BE3030, or the BE2015. Most other CNC machines will accept both sizes, but check the capacity on your machine. If your carving…
From $29.99
…of your cut to change the entire profile. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers and table-mounted portable routers.
$68.97
The CNC Shark Touch Probe attaches to the router in any CNC Shark® Routing System to trace objects down to 0.001" detail allowing the user to import image data for replicating objects, shapes and patterns. Requires Cut 3D Software or similar software to be used with the CNC Shark models. Touch Probe…
$299.99
Now you can get your CNC Shark HD 2.0 to eat as much dust as it creates. With the included magnetic plate installed on your CNC Shark HD series machine, the Dust Boot itself pops on and off with almost no effort. The brushes encircle the router bit, and conform to the workpiece for the tightest possible…
$89.99
…these Isoloc templates, you are ready to produce some extraordinary joinery. Each template features two different joint patterns, one design carefully CNC machined on each side. A single 5/16" or 8mm straight bit, preferably an upcut spiral, does all the cutting. Joint fit is easily adjusted in increments…
…-flat, low-friction surface that won't warp, dent, scratch or delaminate. The whiter, brighter finish enhances visibility, while our new, flat CNC-machined router plates offer better precision and repeatability than ever before. 3/4" T-profile miter slot allows you to use precision aftermarket miter gauges…
$499.99
Put power and precision in the palm of your hand!While it may look like a laminate trimmer, this compact (7-1/2" high) and lightweight (3.3 lbs.) router is more than shop-worthy with a 1.0 HP (max.), 5.7 amp motor - the highest rating in its class.16,000-35,000 RPM.
$124.99
Now you can get your CNC Shark to eat as much dust as it creates. With the included magnetic plate installed on your CNC Shark, the Dust Boot itself pops on and off with almost no effort. The brushes encircle the router bit, and conform to the workpiece for the tightest possible seal, while still allowing…
$89.99
…chip removal is not a problem. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
From $50.97
…engravings, and lithophanes. The 4mm shank fits both Click-N-Carve CNC models (49449 and 49490, sold separately). Solid carbide for along life and the cleanest possible cut.NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also purchase the…
$39.99
…patterns and less fine detail. The ABS sheets are sold in packs of ten, and can be used with either the BE3030, or the BE2015 Click-N-Carve CNC Carving Machines. For other CNC machines, check the capacity on your machine.
$19.99
…settings.Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
From $51.47
…these bits to engrave wood signs. Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
From $20.47
…chip ejection, and the 4mm shank fits both Click-N-Carve CNC models (49449 and 49490, sold separately). Solid carbide for a long life and the cleanest possible cut.NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also purchase the…
$49.99
(0 Items)