The Shark HD 2.0 CNC Machine features enhanced electronics for smoother movement, more power and 50% more speed to the motors. The HD 2.0 is built to handle larger sized routers such as the Porter Cable 890 series. To accommodate the greater torque levels, it features adjustable bearings to give more…
From $3,999.99
…hold-downs are available separately). It is fully compatible with the Bosch Colt Palm Router and includes a 1/2" diameter V-groove router bit. The CNC Shark also includes the new version (7.0) of the VCarve Pro w/Cut 3-D software package - over $900 value. You supply a PC computer with USB 2.0 port and…
$2,899.99
…destroy an aluminum or MDF machine.It is fully compatible with the Bosch Colt Palm Router and includes a 1/2" diameter V-groove router bit. The CNC Shark also includes the new version 7.0 of the VCarve Pro software interface - a $600 value. You supply a PC computer with USB 2.0 port and a Bosch Colt…
$3,799.99
For those looking for plug-and-play simplicity in a CNC router, look no further than the Click-N-Carve BE2015. Affordable, accessible and intuitive, the Click-N-Carve is the very definition of easy-to-use: simply load your photo, close the lid, and with only a few clicks, the BE2015 will be quietly…
$1,599.99
With just a few clicks, the Click-N-Carve BE3030 CNC Router will have you churning out carvings and engravings with the ease of a printer! Boasts all of the plug-and-play simplicity of its little brother, the BE2015, plus an 80 watt spindle for more power, and a larger bed for more capacity. Simply…
$2,199.99
…the CNC Shark! The touch plate automatically zeroes out the z-axis of your CNC Shark - just plug it into the controller and lower the bit onto the plate. The instant the bit makes contact, the router will zero itself out. Made in USA.Touch Plate is compatible with the following machines:CNC Shark Routing…
$89.99
The CNC Shark Touch Probe attaches to the router in any CNC Shark® Routing System to trace objects down to 0.001" detail allowing the user to import image data for replicating objects, shapes and patterns. Requires Cut 3D Software or similar software to be used with the CNC Shark models. Touch Probe…
$299.99
…for superior chip ejection, and the 4mm shank fits both Click-N-Carve CNC models (49449 and 49490, sold separately). Solid carbide for a long life and the cleanest possible cut.NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also…
$49.99
…cuttingedge for superior chip ejection, and the 4mm shank fits both Click-N-Carve CNCmodels (49449 and 49490, sold separately). Solid carbide for a long life andthe cleanest possible cut.NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also…
$24.99
…carvings, engravings, and lithophanes. The 4mm shank fits both Click-N-Carve CNC models (49449 and 49490, sold separately). Solid carbide for a long life and the cleanest possible cut.NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also…
From $24.99
…with the CNC Shark Models andCNC Shark Touch® Probe to process image data into formatted programs that the Shark can read and execute as three dimensional carvings.Cut 3-D Software is compatible with the following machines:CNC Shark Routing SystemCNC Shark Pro Plus Routing SystemCNC Shark HD 2.0 Routing…
$314.99
…carvings, engravings, and lithophanes. The 4mm shank fits both Click-N-Carve CNC models (49449 and 49490, sold separately). Solid carbide for along life and the cleanest possible cut.NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also…
$39.99
Get greater turning speeds with this Jet Live Center MT-2, 708331. Ideal for use on your wood lathe allowing for center variations so it won't damage your work piece.
$19.99
Now you can get your CNC Shark HD 2.0 to eat as much dust as it creates. With the included magnetic plate installed on your CNC Shark HD series machine, the Dust Boot itself pops on and off with almost no effort. The brushes encircle the router bit, and conform to the workpiece for the tightest possible…
$89.99
Now you can get your CNC Shark to eat as much dust as it creates. With the included magnetic plate installed on your CNC Shark, the Dust Boot itself pops on and off with almost no effort. The brushes encircle the router bit, and conform to the workpiece for the tightest possible seal, while still allowing…
$89.99
…patterns and less fine detail. The ABS sheets are sold in packs of ten, and can be used with either the BE3030, or the BE2015 Click-N-Carve CNC Carving Machines. For other CNC machines, check the capacity on your machine.
$19.99
…-035 cuts thinner panels for projects such as humidors and jewelry boxes. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers, as well as table-mounted portable routers.
$108.97
…and are available in two sizes. The 11.8" x 7.9" sheets are for use with the BE3030 Click-N-Carve CNC Carving Machine, while the 7.32" x 5.31" sheets can be used with either the BE3030, or the BE2015. Most other CNC machines will accept both sizes, but check the capacity on your machine. If your carving…
From $29.99
…spacious top, and included controller storage, this table serves nicely as mission control for all things CNC. At 28" x 40", it's large enough to accommodate any CNC Shark, as well as most other consumer CNC routers. Your controller hangs conveniently below the table in a saddle-shaped bracket, and is easy…
$249.99
Our redesigned aluminum router table plates are now CNC-machined flat for the utmost in precision and repeatability. We've kept the same generous dimensions-8-1/4" x 11-3/4" x 1/4" thick-the exact size of the openings in our old tables as well as our redesigned router tables. Choose from four different…
$59.99
…and take on a sepia tone when backlit. They are sold in packs of ten, and can be used with either the BE3030, or the BE2015 Click-N-Carve CNC Carving Machines. Most other CNC machines will accept both sizes, but check the capacity on your machine.function MM_preloadImages() { //v3.0 var d=document;…
$29.99
Achieve fine detail for several delicate flush cutting operations. Flexible 6-1/2" bladehas 26 TPI and cuts on the pull stroke, giving you maximum control for dovetailing,doweling, crafting and more. Diamond ground teeth are electrically hardened toimprove longevity. Blade is easily removed with a…
$16.99
…HPL surface improves visibility and the 1-1/8" thick MDF tables are strong enough to support even the largest routers. The 1/4" aluminum plates are CNC-machined flat for precision and come predrilled to the most common router base patterns, ensuring perfect mounting and eliminating the "Swiss Cheese…
$249.99
Put power and precision in the palm of your hand!While it may look like a laminate trimmer, this compact (7-1/2" high) and lightweight (3.3 lbs.) router is more than shop-worthy with a 1.0 HP (max.), 5.7 amp motor - the highest rating in its class.16,000-35,000 RPM.
$129.99
…ideal for smooth, chip-free routing where chip removal is not a problem. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
From $50.97
(0 Items)