…Perma-SHIELD® coated blade gives new life to underpowered saws and produces smooth crosscuts in hardwoods, softwoods and moldings. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. Thin kerf blades remove less material than standard carbide blades, thus requiring less…
From $49.47
Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The Fine Tooth saw blade for the Kapex Miter Saw was designed for smooth cross-cutting in veneered plywood, sheet goods, melamine, and hard and soft woods. The Fine Tooth blade incorporates…
$140.00
This multi-purpose blade will cut stacks of manmade wood products as well as hardwood and softwood up to 2-3/4" thick. The blade's deep gullets and TCG rip and crosscut through hardwoods and softwoods with ease. Although the ideal working range is 1/2" to 2-3/4" thick, thinner or thicker materials may…
From $68.47
…Offer valid while supplies last!This twin pack of Freud blades includes a 24T General Purpose Blade for ripping and dimensioning, and an 80T Ultra-Fine Crosscut Blade for the fine finishing cuts on intricate molding and joinery. Both blades feature thin-kerf technology, which is less taxing on your…
(Reg. $119.99)
Now $79.99
SAVE 33% TODAY!
…cut. One blade does it all. Whether you're ripping or crosscutting, a Premier Fusion blade will tackle any project. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.The Perma-SHIELD coating covers the blade plate and cutting…
$79.97
…. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots…
From $71.47
This heavy-duty blade is designed primarily for heavy use in a cabinetmaker's shop. Combining a 10 hook angle and the alternate top bevel tooth grind, this blade provides a good crosscut and long cutting life in hardwood, softwood, plywood, and chipboard. The LU73M series is ideal for cutting a wide…
From $62.97
…superior blade gives glass-smooth finishes when crosscutting hard and soft woods, so no sanding is required. What makes this blade so special is the unique side grinding of each tooth. The teeth actually polish the material as it cuts. New laser-cut anti-vibration that resonates in standard blades, producing…
From $71.47
…crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this combination blade, there is no need for stabilizers. The Perma-SHIELD coating covers the blade plate…
From $49.97
This thin kerf blade produces glass smooth surfaces when crosscutting hardwoods and softwoods, thanks to Freud's unique side grinding technology. The larger blades are ideal for miter box applications. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower…
From $57.47
…. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots…
From $61.97
…and crosscuts hardwoods up to 2" thick. Ply-veneers of oak and birch will crosscut with no bottom splinter at moderate feed rates. Ends second-step finishing (jointing and sanding not required).For another option in the Forrest Woodworker II series, check out the Thin Kerf General Purpose Blade.
$120.79
The Crosscut Saw is ideal for cross-cutting both soft and hard woods. Features impulse hardened teeth ensuring consistent cutting through the life of the blade. Teeth are taper ground preventing the blade from binding amidst deep cuts. Measures 22-3/8" in total lengthBlade has a 9-1/2" cutting edge…
From $22.59
…blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Fine Tooth Cross-Cut Saw blade for the TS 75 Plunge Cut Saw is an excellent blade for smooth cross-cutting in veneered plywood, sheet goods, melamine, and hard and soft woods. This blade…
$115.00
Combined with our Crosscut Sled (33113), this platform will provide true zero-clearance support on both sides of the blade for safe, splinter-free cuts. By keeping drop-off pieces from sagging at the end of the cut, it prevents them from splitting off unpredictably, and from getting jammed in the throat…
$34.99
…LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods. The combination…
From $54.97
…Storage hooks on the stand keep your accessories within reach. Riving knife maintains close blade proximity to reduce chance of kickback Micro-adjust miter gauge with extension plate offers wider crosscut support Blade guard and riving knife have quick release for tool-less mounting and removal Precision…
$1,699.99
…Storage hooks on the stand keep your accessories within reach. Riving knife maintains close blade proximity to reduce chance of kickback Micro-adjust miter gauge with extension plate offers wider crosscut support Blade guard and riving knife have quick release for tool-less mounting and removal Precision…
$1,599.99
This heavy-duty blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may occur. The Silver…
From $54.97
…to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may occur.The Perma-SHIELD coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD blades resist binding in large…
From $40.97
This heavy-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may occur…
$41.97
…kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5 negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades, thus requiring less…
From $55.47
When the very finest crosscuts are desired, the Irwin Marples Ultra-Smooth Cross-Cutting Saw Blade more than makes the cut. 80 teeth boasting a HI-ATB tooth geometry ensure crisp kerfs and minimal saw marks, even in the most delicate materials. The blade also features a thin kerf design, which reduces…
$59.99
For fine, chip-free crosscuts with minimal saw marks, turn to the Irwin Marples 60T Fine Crosscutting Saw Blade. Whether mounted on a miter saw or in a table saw, the razor-sharp carbide teeth and ATB+R grind will produce excellent cuts in hard and soft woods. The unique raker tooth design allows for…
$54.99
…LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods. The combination…
$52.47
|
Need Help? |
(0 Items)