Top quality router bits that meet the high standards of Rockler Woodworking and Hardware.
From $13.99
Top quality router bits that meet the high standards of Rockler Woodworking and Hardware.
$19.99
Don't miss a beat in your dovetailing projects - keep plenty of these bits on hand and get more done! Carbide-tipped replacement router bit for Porter-Cable 4210 and 4212 dovetail jigs.
$19.99
…expanding cutter and wedge-ring system. The high-speed steel Tenon-Lok cutter features spring-action blades that flare out at the base, creating a dovetail-shaped round mortise. The sharpened tapered steel wedge-ring then sits in the flared mortise, expanding the tenon with minimal splitting as it gets…
$22.99
Application: Offers a mix of woodworkers' favorite bits, including "V" grooving, flush trimming, chamfering and dovetailing. All bits have 1/2" shanks.Set comes in Freud's unique shadow box case that can hang on the wall or mount on the bench to keep bits handy and safe.Cuts all composition materials, plywoods…
$220.47
Top quality router bit that meets the high standards of Rockler Woodworking and Hardware. Replacement router bit for 4212 Porter-Cable 12" Dovetail Jig (29550, sold separately). 2 Flute, with an overall Length of 2-1/2".
$17.99
These 8mm shank dovetail router bits are 25% larger than 1/4" bits and reduce chatter.Includes 1/2" x 14 and 8 dovetail bits, 5/16" straight bit, and 1/2" to 8mm collet adapter. Fit all existing Rockler dovetail jigs
$54.99
By removing the Dovetail finger assembly and simply sliding on one of these Isoloc templates, you are ready to produce some extraordinary joinery. Each template features two different joint patterns, one design carefully CNC machined on each side. A single 5/16" or 8mm straight bit, preferably an upcut…
These top-quality carbide bits work with wood thicknesses ranging from 1/8" to 5/8", allowing you to cut joints for delicate jewelry boxes, as well as for sturdy drawers. 8 dovetail angle offers a more traditional look, and less chance of breakage at the corner of the tail. Beefy 8mm shanks minimize…
From $17.99
…shank bit set for all D Series dovetail jigs. Set includes Leigh bit numbers: 50-8, 60-8, 70-8, 75-8, 90, 100, 150, 160, 101-8, 112-8 and 128-8 PLUS a 172-8 1/2" to 8mm collet reducer.34354 is a 16-piece bit set. It includes two 1/2" to 8mm collet adaptors in addition to every 8mm and 1/2" shank bit used…
From $201.39
…after identical part, and are never worse for wear. These guide bushings are available in a wide range of diameters (see below) for different bits, dovetail jigs and other template routing applications. They fit perfectly in any router base with a 1-1/4" diameter center hole. Locking nuts are sold separately…
From $7.79
…features 7 carbide tipped bits, each honed with 600 grit diamond wheels for superbly smooth, efficient cutting. 8mm bit shanks are 1-3/4" long to extend through the thickness of the guide fingers. Set includes 4 Through Dovetail bits (1/4", 5/16", 3/8', and 7/16"), and 3 Half-blind bits (10°, 12°, and 18°…
$139.69
Make precise, tight-fitting box joints with your router! For use on virtually any router table with a standard 3/4" miter slot, this jig features a smooth-sliding backer sled and three (3) precision-machined aluminum indexing keys to give you air-tight joints with either 1/4", 3/8" or 1/2" spacing.…
$79.99
…accommodates stock from 1/4" to 1-1/8" thick and includes a 1/2" shank, carbide-tipped dovetail bit. Additional templates, sold separately, are available to create through dovetails, box joints and miniature dovetails (see More Info for details).
$136.49
…saw or router table. Use the Freud Box Joint Cutter Set (sold separately, 27371) to make precise joints on your table saw, or our 4-Piece Straight Bit Set (sold separately, 60579) using your router.
$119.99
Cuts through dovetails, box joints, half-blind dovetails, rabbeted half-blind dovetails, and dovetail dados.Patented alignment lines and router bit depth stop allow for quick, easy set-up Handles stock from 1/4" to 1-1/8" thick and up to 12" wide
$187.99
Create traditional hand-crafted joinery using box joints, half-pitch through dovetails, or through dovetails with this Leigh Accessory Kit for the Leigh R9 Plus Joinery System!
$89.00
…/4" x 3/8", 1/4" x 1/2", 1/4" x 3/4", 5/16" x 1/2", 5/16" x 3/4" and 1/2" x 1". Additional sizes can be routed using table limit stops and different bit sizes. Note: New FMT guides not exactly as shown.
$32.99
…1/4" through dovetails with tight 1/2" or 5/8" spacing (on center) in stock ranging from 1/4" to just 1/8" thick. The set includes a template, two miniature 1/8" shank router bits, a reducer to adapt your router, and a template guide. Attaches quickly and easily to the Rockler Dovetail Jig (22818).
$66.99
…accessories for your Leigh FMT Mortise and Tenon Jig with this value-priced bundle! It includes a boxed-set of all the standard bits for the FMT-eight solid carbide bits in all, ranging from 1/16" to 1/2" in diameter-as well as sixteen specialty guides for routing a huge variety of perfect mortise and…
$349.00
…! The samegreat features produce the same great joints. Simplicity is the key. The Super FMT usesjust one bit, one guide and one setup for every standard joint. It's that easy. There areno bit or guide changes to fuss with and the setup stays the same for both parts of thejoint. Joint fit is easily…
$499.00
These 3-pc. sets contain all three Leigh isoloc bits for perfect decorative joints, both standard and inlaid. Both include 5/16", 1/4" and 3/8" bits. 38339 (Leigh item 1617I) is HSS. 37395 (Leigh item 1617I-C) is solid carbide.
$86.99
…, 3/8" and 1/2". These guides can rout square cornered tenons to match any mortise length up to 5". All square tenons are routed with a 1/2" router bit. Note: New FMT guides not exactly as shown.
$79.99
…table gives plenty of work support and will adjust to any angle between 0 and 35. The table can also move left to right and forward and back on dovetail ways with the large handwheel controls. Adjustable linear stops and flip down stop allow for precision repeatability. The quick adjust clamp provides…
$1,274.99
…13/16" x 8 degree dovetail bits 7/16" x 1-1/4" CL straight, 1/2 x 1-1/4" CL straight bits 1/2" x 10 degree, 12 degree, and 18 degree dovetail bits 1/2" and 8mm shank bits, 1/2" to 8mm collet reducer Leigh D4 accessory kit includes the (VRS) vacuum and router support and 12 piece bit set. Leighs ingenious…
$249.00
(0 Items)