Used mainly for cabinet or desk drawers. Made from select european beech wood. Sanded and ready for finishing.
$5.29
Install antique brass plated ring pulls to give your furniture a vintage look and feel. The swing handle makes it easy to pull doors and drawers open and is also part of the overall decorative look of the piece.
$4.59
…been re-issued by the Stickley Furniture Company exclusively for Rockler! These pulls duplicate the hand-hammered texture of the originals and are finished to a warm, glowing patina.Choose from two sizes of drawer pulls in Dark Copper.Cast copper.Includes mounting hardware.
From $18.19
After finishing, these mushroom shaped knobs will surely complement the appearance of your doors and drawers.
$5.69
These brass knobs make excellent door and drawer pulls for small box projects. Polished finish provides an elegant look. Easy to install.
From $4.19
Finish:Polished NickelBase Material:ZincLength:5 1/6 inchWidth:4/7 inchProjection:1 1/7 inchCenter to Center Hole Spacing:96mmMachine Screw Thread Size:2 x #8 32 x 1 inchScrews are includedWarranty:Lifetime
$8.69
Transform the look of your drawer without spending a fortune!Finish: ClearOverall length: 4-1/8"Projection: 1-1/2"Material: GlassMounting holes: 3"Screws are included
$6.19
…without spending a lot of cash? Switch out your hardware for these Oil Rubbed Bronze Bar Pulls! The stylish pulls refresh the look of any kitchen and install in minutes using the two included screws. The pulls look great in the kitchen, they're easy to grab, and the 1-3/8" projection gives you room…
From $7.99
The perfect finishing touch to your new drawer!Finish: Clear with nickel baseOverall length: 4"Projection: 1-1/4"Material: GlassMounting holes: 3"Screws are included
$10.49
Finish:Polished NickelBase Material:ZincLength:4 1/3 inchWidth:1/2 inchProjection:1 inchCenter to Center Hole Spacing:3 inchMachine Screw Thread Size:2 x #8 32 x 1 inchScrews are includedWarranty:Lifetime
$7.89
4-5/8" Long x 7/8" Wide1" projection3" boring (hole spacing)Lancaster Hand Polished Finish
$3.49
Label holder features an integrated drawer pull - ideal for curio chests, file drawers, card catalogs, hardware and jewelry storage, mail sorting, or any small chest of drawers where organization is a priority. Available in a range of finishes. Includes screws. Sold singly. Made in USA.
$1.69
Complete a natural all-wood look for drawers with a modern design that gives you access to drawer contents without metal hardware. These attractive Danish-made pulls are sanded and ready to finish. Installation requires the following mortise: 3-3/32" (W) x 1-1/16" (H) x 13/32" (D).
$9.49
Finish:Polished NickelBase Material:ZincProjection:1 1/5 inchKnob Diameter:1 1/6 inchMachine Screw Thread Size:1 x #8 32 x 1 inchScrews are includedWarranty:Lifetime
$6.99
Eye-catching beauty and quality shine through in the rich, golden luster of brass. A beautiful accent to wood furniture.1/2" diameter.1/2" projection.Solid brass.Includes mounting hardware.
$6.19
Sleek looking surface mounted oak pull. Sanded smooth and ready for finishing. Approximately 4-1/2" wide x 1-3/4" high overall.
$9.59
Decorative minimalist recessed pull is perfect for cabinet doors or drawers, and may be surface (lip exposed) or flush mounted. 2" Diameter.
$34.99
Finish:Gilded BronzeBase Material:ZincLength:4 1/3 inchWidth:3/5 inchProjection:1 3/7 inchCenter to Center Hole Spacing:3 3/4 inchMachine Screw Thread Size:2 x #8 32 x 1 inchScrews are includedWarranty:Lifetime
$6.79
Finish:Satin Nickel with BlackBase Material:ZincLength:5"Width:3/4"Projection:1"Center to Center Hole Spacing:3"Machine Screw Thread Size:#8-32Screws are includedWarranty:Lifetime
$4.99
A door/drawer pull with a strong folk-art influence. Each piece is precisely shaped, sanded and ready for finishing.Basket pull measures 2-1/8" Diameter with a 1-3/4" projection and is available in Maple, Cherry, Red Oak, and Basswood.
From $7.99
…designs of Gustav and Leopold Stickley, this cast copper hardware has been re-issued by the Stickley Furniture Company exclusively for Rockler! These pulls duplicate the hand-hammered texture of the originals and are finished to a warm, glowing patina.Cast copper.Includes mounting hardware.
(Reg. $24.69)
Now $13.20
SAVE 46% TODAY!
Ideal for mounting cabinet knobs and pulls when material thickness varies, these truss head screws can be broken to the correct length in 1/4" increments. The large, low profile head ensures a clean look and solid holding power. Screws are zinc plated and available in standard and metric sizes.
From $4.59
Finish:Black BronzeBase Material:ZincLength:4 3/5 inchWidth:3/5 inchProjection:1 1/6 inchCenter to Center Hole Spacing:3 3/4 inchMachine Screw Thread Size:2 x #8 32 x 1 inchScrews are includedWarranty:Lifetime
$6.79
…picture hanging applications where the wire and rings will be exposed. They also work well for decorative elements on small boxes, such as for drawer pulls on jewelry boxes.
$3.49
…Independent Partner Resellers.The 6-Drawer Sortainer is an excellent solution for organization, storage, and transport of fasteners, hardware, and other small project components (screws, washers, nails, nuts and bolts, hinges, knobs and more). Six Medium drawers can be accessed from both sides, and…
$150.00
(0 Items)