Set these solid pulls at the spacing you need to get the look you want! Bases areadjustable to fit pre-existing holes. Simply unscrew the bases completely from theclamping rings, loosen the set screws from the rings and slide the rings to thedesired location. Then tighten the set screws and bases. You're…
$12.99
Makes a great trim and pull for cabinets, doors, drawers. 3/4" thick. 5mm wide by 8mm deep tenon. 10 ft. minimum. Available in Oak.
$8.69
Complete a natural all-wood look for drawers with a modern design that gives you access to drawer contents without metal hardware. These attractive Danish-made pulls are sanded and ready to finish. Installation requires the following mortise: 3-3/32" (W) x 1-1/16" (H) x 13/32" (D).
$9.49
…designs of Gustav and Leopold Stickley, this cast copper hardware has been re-issued by the Stickley Furniture Company exclusively for Rockler! These pulls duplicate the hand-hammered texture of the originals and are finished to a warm, glowing patina.Cast copper.Includes mounting hardware.
(Reg. $24.69)
Now $13.20
SAVE 46% TODAY!
Used mainly for cabinet or desk drawers. Made from select european beech wood. Sanded and ready for finishing.
$5.29
Finish:Polished NickelBase Material:ZincLength:4 inchWidth:1 1/9 inchProjection:3/4 inchCenter to Center Hole Spacing:3.5 inchMachine Screw Thread Size:2 x #8 32 x 1 inchScrews are includedWarranty:Lifetime
$10.99
…without spending a lot of cash? Switch out your hardware for these Oil Rubbed Bronze Bar Pulls! The stylish pulls refresh the look of any kitchen and install in minutes using the two included screws. The pulls look great in the kitchen, they're easy to grab, and the 1-3/8" projection gives you room…
From $7.99
Finish:Gilded BronzeBase Material:ZincLength:3 2/3 inchWidth:3/5 inchProjection:1 1/3 inchCenter to Center Hole Spacing:3 inchMachine Screw Thread Size:2 x #8 32 x 1 inchScrews are includedWarranty:Lifetime
$5.69
Install antique brass plated ring pulls to give your furniture a vintage look and feel. The swing handle makes it easy to pull doors and drawers open and is also part of the overall decorative look of the piece.
$4.59
Sleek looking surface mounted oak pull. Sanded smooth and ready for finishing. Approximately 4-1/2" wide x 1-3/4" high overall.
$9.59
Finish:Polished NickelBase Material:ZincLength:4 1/3 inchWidth:1/2 inchProjection:1 inchCenter to Center Hole Spacing:3 inchMachine Screw Thread Size:2 x #8 32 x 1 inchScrews are includedWarranty:Lifetime
$7.89
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
$49.99
This Drawer Stop prevents drawers from unintentionally being pulled out while keeping the option of easy removal.
$4.99
These brass knobs make excellent door and drawer pulls for small box projects. Polished finish provides an elegant look. Easy to install.
From $4.19
Finish:Antique EnglishBase Material:ZINCProjection:7/8 InchBase Diameter:5/16 InchKnob Diameter:1-1/4 InchesMachine Screw Thread Size:8-32Screw Length:1 InchPilot Hole Size:3/16 InchScrews are includedWarranty:Lifetime
$4.99
Great prevention from pulling drawer out too far. Drawer stops are excellent for protecting curious children from pulling drawers out too far. Prevents contents from being spilled over the floor. Drill one hole to install. 4 per pack.
$4.99
Decorative minimalist recessed pull is perfect for cabinet doors or drawers, and may be surface (lip exposed) or flush mounted. 2" Diameter.
$29.39
Organize your kitchen with Rev-a-Shelf's wide array of wire pull-outs with chrome finish. This innovative collection consists of dish and cookware organizers, shelves, drawer organizers, and baskets.Can be side or bottom mounted with adjustable brackets includedDoor mount kit included for mounting…
From $260.59
Finish:Black BronzeBase Material:ZincProjection:1 inchKnob Diameter:1 1/3 inchMachine Screw Thread Size:1 x #8 32 x 1 inchScrews are includedWarranty:Lifetime
$4.59
4-5/8" Long x 7/8" Wide1" projection3" boring (hole spacing)Lancaster Hand Polished Finish
$3.49
Eye-catching beauty and quality shine through in the rich, golden luster of brass. A beautiful accent to wood furniture.1/2" diameter.1/2" projection.Solid brass.Includes mounting hardware.
$6.19
Finish:Black BronzeBase Material:ZincLength:3 3/4 inchWidth:3/5 inchProjection:1 1/8 inchCenter to Center Hole Spacing:3 inchMachine Screw Thread Size:2 x #8 32 x 1 inchScrews are includedWarranty:Lifetime
$5.69
…been re-issued by the Stickley Furniture Company exclusively for Rockler! These pulls duplicate the hand-hammered texture of the originals and are finished to a warm, glowing patina.Choose from two sizes of drawer pulls in Dark Copper.Cast copper.Includes mounting hardware.
From $18.19
Marking screw holes becomes simple, quick and accurate! Creates absolutely accurate spacing for pull borings.
$19.99
Finish:Black BronzeBase Material:ZincWidth:1 1/2 inchProjection:1 1/3 inchKnob Diameter:1 inchMachine Screw Thread Size:1 x #8 32 x 1 inchScrews are includedWarranty:Lifetime
$4.99
(0 Items)