Turn your portable drill into a drill press and get the accuracy you need at a job site! The guide attaches directly to a 3/8" drill chuck, and allows you to drill larger pieces you can't fit on your stationary press. Pre-drilled holes allow you to attach a base or mount it to a table.
$52.99
The exclusive JIG IT Drill Guide can be used with a drill press or a hand drill to ensure perfectly aligned holes everytime! Use with our Long Shank Forstner Bits (sold separately) to drill flat-bottomed holes.
$16.39
…perpendicular drill holes in round stock, flat stock, and even directly into corners-all with just a hand drill. The precisely milled V-groove in the bottom of the drill guide centers the holes on pipes, dowels, and outside corners, while the flats allow 90 drilling into flat surfaces-just clamp and drill. 17…
$26.29
Drill straight and true holes every time with the Drill Guide Kit. The drill guide kit allows you to insert a steel bushing into the plastic guide and your drill will bore perfectly perpendicular holes. An ingenious design also centers your drill bit on edges. The drill guide kit also works to drill…
$15.49
…and line up the jig. Made to last with a 3/16" acrylic faces and hardened steel drill guides. 1/2" guide has holes spaced 1"-on-center.Also Available from Rockler:Rockler 1/4" Dowel Drilling JigRockler 3/8" Dowel Drilling Jig
(Reg. $15.49)
Now $9.99
SAVE 35% TODAY!
Delivers the precision demanded by professional woodworkers. Precisely aligned guides for 1/4" , 5/16" and 3/8" holes. Handles stock ranging from 1/2" to 1-1/4" , includes precise depth stops for 1/4" , 5/16" and 3/8" drill bits. An assortment of dowel pins is included with the jig. Aluminum.
$42.99
A pocket hole jig that fits right in your pocket, has a hardened steel drill guide and glass-reinforced nylon body with chip extraction hole. Check out our kit which includes jig, pocket hole bit and stop collar!See pocket hole plugs.
From $8.99
Drill concealed hinges with ease and accuracy - whether you're making one door or a hundred! Includes the 30" rail, two alignment plates that mount to the rail,stop block for positioning the jig on the door, one bit guide, stop collar and spring.
$93.99
…big (on thin stock, picture frames, small drawerboxes, etc.). When that's the case this miniature drill guide is ideal. It has a 25%smaller hole diameter and includes a Micro Pocket Drill Guide, Drill Bit and DepthCollar, as well as a Starter Screw Set. Replacement accessories sold separately.
$44.95
…perpendicular drill holes in round stock, flat stock, and even directly into corners-all with just a hand drill. The precisely milled V-groove in the bottom of the drill guide centers the holes on pipes, dowels, and outside corners, while the flats allow 90 drilling into flat surfaces - just clamp and drill. Also…
$24.95
…will apply for Express delivery and heavy/oversized items. Not valid at Rockler Retail stores or Independent Partner Resellers.With the LR 32 Hole Drilling System from Festool, you can precisely and efficiently build cabinets using the European frameless 32 mm system. Invaluable for placing cup hinges…
$480.00
…with just your hand drill and the Beadlock Pro Kit. Beadlock Pro does everything Beadlock Basic does, but adds greater capacity and adjustability, plus the ability to create traditional smooth-sided mortises. Just pop the included paring block into the jig to provide an accurate guide for your chisel. With…
$137.99
…the jig,and a large frontal clamping recess for securing the jig to the bench, you'll get perfectalignment every time. Thanks to the removable drill guide and portable base, you havethe option of taking the jig to large work pieces and awkward locations or slipping itin your pocket for work on the job…
$139.00
…correspond with the check marks on the work piece. Then drill, and repeat the process for the second work piece.Perfect alignment of all joints is guaranteed because the precise spacing and alignment of the five precision machined drill guides is maintained exactly the same for both work pieces. The…
$310.00
Complete measuring system for your miter saw, radial arm saw or drill press is faster and more accurate than putting a pencil mark on every board!Just set precision lens cursor to desired length and place board against stop - you're ready to cut to length.
$124.00
…repairs or original construction, the Tenon-Lok system requires both a cutter and a matching wedge ring (sold here in convenient multi-packs). A setter guide is included with every cutter.
$22.99
…quality carbide tipped bits are designed to drill flat-bottomed holes. Use with a drill press, or with a hand drill and our exclusive JIG IT® Drill Guide. All Forstner bits have a 3/8" diameter shank and require a 3/8" stop collar if used with the JIG IT Drill Guide. These long shanks are 3-7/8" long.
From $4.79
…rods in many styles and finishes.The CVRI insert valet rods install easily into 3/4" and larger panels and are available in several finishes. A Drill Guide with Bit is also available.
From $13.49
…the blocks tothe bottom of the Jig's Drill Guide. Use one block for 3/4" material, 2 for 1" materialand 3 for 1-1/4" material. Includes 3 blocks.*Please note: For use with Kreg K3 jigs purchased after January 1st, 2009 with slots on the underside of the drill guide.
$9.99
…handles and a click-lock sliding jaw make it simple to position and securethese clamps for use as a straight edge guide for circular saws and routers and as afence for your table saw or drill press. A very low 9/16" profile body and flat top allowmany applications without obstructing tools. Easy-to-read…
From $39.99
The new JET model JDP-17DX - 17 Drill Press was designed especially for the woodworker. Head mounted dual AC powered laser guide system provides an accurate drilling cross point on the workpiece. The poly v-belt drive system is quiet and vibration free. This drill press also features a built-in work…
$609.99
The optional Dowelmax 1/4" drill guide package is for conversion of the Dowelmax Classic to use with 1/4" dowels in narrower 1/2" and 5/8" stock.See the full Dowelmax Classic Doweling Jig here.
$80.00
…from jewelry boxes to cabinets.Just combine your #25971 Incra Jig positioner or #24981 Incra Lead Screw 17" Fence System with the HingeCrafter drill guide and the results will be beautiful wood hinges ready to glue right into your project.
$83.99
…correspond with the check marks on the work piece. Then drill, and repeat the process for the second work piece.Perfect alignment of all joints is guaranteed because the precise spacing and alignment of the five precision machined drill guides is maintained exactly the same for both work pieces. The…
$99.00
(3)
