The Festool TS 55 has become iconic in the woodworking world as the "table saw that fits in your hand", and the TS 55 REQ adds many refinements to the original. The first difference you'll notice is the flat saw housing, which allows you to cut within 1/2" of walls and other obstacles. An added benefit…
$585.00
NOTE: No International shipping on any Festool item. Items marked "Direct Ship" can only be shipped within the Continental United States. The acclaimed system for laser straight cuts! With the correct Festool Guide Stop, they can work with Festool routers, plunge cut saws, jig saws and more.
From $75.00
Festool FS Guide Rails are available in eight different lengths from 32 inches to 197 inches (800 - 5000 mm), providing the right length for straight, splinterfree cutting in just about any application. The integrated splinterguard is a critical guide rail system component, and after some time and heavy…
$35.00
Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Universal General Purpose blade for the TS 55 Plunge Cut Saw is a clean-cutting general purpose blade for wood and soft plastics, and serves as a fine-rip cutting blade…
$50.00
Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Panther Ripping blade for the TS 55 Plunge Cut Saw is an excellent fast-cutting rip blade with an aggressive hook angle and deep gullets for use with both hard and soft…
$45.00
Parallel Edge Guide enables guided, parallel cutting with the TS 55 Plunge Cut Saw. Can be used for parallel rip cutting with the TS saw, independent of the FS guide rails. Attaches to both sides of the saw for short side or broad side cuts. Rip capacity from the blade side up to 11 13/16in (300mm)…
$60.00
Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Aluminum/Plastic Cutting blade for the TS 55 Plunge Cut Saw is designed to cut non-ferrous materials, especially aluminum; also useful for acrylics and hard plastics. This…
$90.00
Replacement power cord for TS 55 and TS 75. Works on all Festool tools with Plug-it connect. Convenient 13' length.
$42.00
…splinterguard. For best results, replace Splinterguard when switching between different kerf blades. Splinterguards attach easily to both the TS 55 and TS 75 Plunge Cut Saws. Includes 5 Splinterguards and 1 replacement thumbscrew.
$20.00
The Festool Parallel Guides attach to your Festool Guide Rail to allow for fast, accurate, repeatable cuts at any dimension from 7-11/16" to 25-19/32". They can be used to rip cabinet parts to width, or to crosscut them to length, and work much like a table saw fence, eliminating the need to measure…
$260.00
….The TS 75 is a plunge-action circular saw that performs like a high-quality table saw, yielding the cleanest, most precise cuts imaginable in an ultra-compact system. It features more power and greater cutting depth than the smaller TS 55, plus added safety features. Designed to work with Festool's revolutionary…
$695.00
These handy extensions attach to your Festool Parallel Guides (sold separately, 44928), allowing you to make narrow rip cuts from 1/16" to 7-11/16" wide withperfect consistency and accuracy. The Parallel Guide Extensions attach to the standard Parallel Guide System using a tool-less thumb screw.
$145.00
Cover Plate enhances dust extraction for the TS 55 Plunge Cut Saw by enclosing blade housing.
$55.00
…this blade extra hook angle. The 5 hook angle allows for a smooth, easy cut with a handheld saw. At 160mm in diameter, this blade will fit the Festool TS-55 saw family, the DeWalt DWS520 track saw, and Makita SP600K track saw.The Perma-SHIELD coating covers the blade plate and cutting edge in a protective…
$52.47
…extra negative hook angle. The -5 hook angle allows for a smooth, easy cut with a handheld saw. At 160mm in diameter, this blade will fit the Festool TS-55 saw family, the DeWalt DWS520 track saw, and Makita SP600K track saw. The Perma-SHIELD coating covers the blade plate and cutting edge in a protective…
$65.97
…especially for track saws. The 20 hook angle allows for a smooth, easy cut with a handheld saw. At 160mm in diameter, this blade will fit the Festool TS-55 saw family, the DeWalt DWS520 track saw, and Makita SP600K track saw.The Perma-SHIELD coating covers the blade plate and cutting edge in a protective…
$32.97
…this blade extra hook angle. The 12 hook angle allows for a smooth, easy cut with a handheld saw. At 160mm in diameter, this blade will fit the Festool TS-55 saw family, the DeWalt DWS520 track saw, and Makita SP600K track saw.The Perma-SHIELD coating covers the blade plate and cutting edge in a protective…
$41.97
(0 Items)