…with included 5/16" T-boltand knob. Ideal for fences with top-mounted tracks. Set the stop at your desiredmeasurement to create a square end for repeatable cuts and other tasks.Also available: Rockler Flip Stop for 3" fences (26991).
$16.99
…The aluminum arm flips down when you need it and stays out of the way when you don't! Slides up and down any fence with a top-mounted T-track and locks down with a comfortable 1" diameter knob. 5/16" T-bolt fits both standard and Universal T-tracks. Also available: Rockler Flip Stop for 2-1/4" fences…
$16.99
…-Track Fence Caps. Each tape comes with an acrylic hairline indicator with adhesive backing that can be attached to Rockler Flip Stops (26991 and 31214) or other homemade stops. Inserts are plastic extrusions with a steel rule. The 48" steel rule can be cut to fit the 36" plastic extrusion depending…
From $10.99
…woodworking machines to ensure accuracy.Allows you to cut materials with more speed and repeatable precision than ever before.Top Trak Fence and Flip Stop sold separately
$34.99
Positive stops at 0, 10, 22-1/2, 30 and 45 - and micro-adjustability to 1/100 - give you speed, repeatability and the same accuracy that machine shops strive for!Add to that the perfect, repeatable dimensions you'll get from the precision flip stop, and you can say "goodbye" to mitered joint gaps forever…
$139.00
…jigs and fixtures. Once assembled, the multiple tracks give you countless options for attaching stops, hold-downs, sub-fences and more. Available in 2-1/4" and 3" heights. Multi Track Brackets and Flip Stops sold separately.
From $28.99
…stop for the Best Fence lets you place the stop anywhere you want with precision and ease. A magnifying glass is built in so reading the tape measurements is easy. Stops can be lifted up and out of the way when not needed, and flipped back down without losing your measurement.Calibrating the stop is…
$49.99
Fence Backstops provide extra height for the back of the Best Fence. Brackets flip forward onto the fence and slide into position, then flip back to cam solidly into place. Attach different boards between the two brackets for as much or little support as you need!See the Best Fence v3 System here.
$29.99
…positivestops for pin-point accuracy at every degree (with special stops at +/-22.5), plus amicro-adjustable vernier scale for fine-tuning to 1/10. Add to that the industry'ssmoothest adjustable miter bar, a telescoping fence, a premium dual-arm flip stop,and superior duplicating ability, and you've got a can't…
$189.99
…precisely tune angles for air-tight miters and crosscuts no more squinting.Features smooth-sliding no-slop ball bearings, a solid aluminum fence, flip-down stop,and more.
$119.99
…position along a tape. They are self-adhesive for quick application and made of clear acrylic. Indicators can be affixed to Flip Stops (31214 or 26991, sold separately) or other stops to slide along measuring devices. Two indicators per pack.
$3.99
…surface you need to handle long stock and connects to the UG-Kapex Wheeled Stand without the use of tools. Features integrated flip stops that give you precise miter cuts but flip out of the way when not in use. Expands from 58-1/4" to 94-1/2" for a spacious work area. Sets up and breaks down in seconds…
$300.00
…sturdy telescoping fence and dual-arm Flip Shop Stop for accurate miter cuts on the table saw or router table.Precision angle indexing teeth are laser cut in solid steel to lock in 41 positive angle stops in 5° increments over a full 180° range, with special stops at 22-1/2° and 67-1/2°.Stainless steel…
$159.99
…patented Incra incremental angle control delivers perfect, repeatable accuracy. Includes 36"-64" telescoping miter fence and dual flip stop.With 364 precision indexed angle stops over +/-90° to produce perfect, gap-free miter joints on any multi-sided object.
$299.99
…bevel cutsSingle lever action double bevel design allows saw to easily bevel left and right 0 - 48 with positive stops at 0, 22.5, 33.9 and 45 in both directions permitting user to flip the saw and not the materialExclusive Back Fence Design delivers ability to cut 2 x 16 dimensional lumber at 90 and…
$599.00
…easily sliding out of the way for bevel cutsDouble bevel design allows saw to bevel left and right 0 - 48 with positive stops at 0, 33.9, 45 and 48 both left and right allowing user to flip the saw not the materialExclusive Back Fence Design delivers ability to cut 2 x 10 dimensional lumber at 90 and 2 x…
$399.00
Use your Leigh FMT to flip your mortises on their sides! Some joints, like dust dividers in a chest of drawers, require mortises to be routed at 90° to the clamp plate. The new Y-Axis mortise guide can produce six sizes of mortises: 1/4" x 3/8", 1/4" x 1/2", 1/4" x 3/4", 5/16" x 1/2", 5/16" x 3/4"…
$32.99
…handle long stock and connects to the UG-Kapex Wheeled Stand without the use of tools. Both extensions feature integrated flip stops that give you precise miter cuts but flip out of the way when not in use. Each extension expands from 58-1/4" to 94-1/2" for a spacious work area. Sets up and takes down…
$525.00
…depth stop gives a uniform depth of mortise. A large 20-1/4" x 7" table gives plenty of work support and will adjust to any angle between 0 and 35. The table can also move left to right and forward and back on dovetail ways with the large handwheel controls. Adjustable linear stops and flip down stop allow…
$1,274.99
…through a full four-foot stroke. In addition, on board the table is a large miter head complete with stock hold-down clamp and a 56" miter fence with flip stop. The large table can easily accommodate a stock feeder for longer production runs.Sliding table with 4-foot stroke works with miter head, hold-down…
$8,675.99
…surface you need to handle long stock and connects to the UG-Kapex Wheeled Stand without the use of tools. Features integrated flip stops that give you precise miter cuts but flip out of the way when not in use. Expands from 58-1/4" to 94-1/2" for a spacious work area. Sets up and breaks down in seconds…
$300.00
Includes the new Multimaster FMM 250 Q, boasting 40% more power, better ergonomics and the ability to change accessories with just the flip of a lever. Go from saw to sander to scraper in just seconds. Unique oscillating action makes quick work out of tough, picky jobs like removing grout and scraping…
$399.99
|
Need Help? |
(0 Items)