…same diameter as the blade, making this the perfect choice for template work when the template is above the worked material (if using a hand-held router in the conventional way). Available in three sizes. Click "More Info" Tab for specific dimensions.
From $22.27
Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes, for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting.
From $21.99
Carbide-tipped cutter handles all thicknesses of doors up to 2" thick. With top bearing for easy cutting.
$44.99
…-leveling/locking system guarantees a secure, flush interface with the included Bench Dog ProLift Router Lift. Plus, you get the 32" ProFence, a precision-milled aluminum fence with two MDF sub-fences, front and rear T-tracks, a 2-1/2" dust port and an integrated bit guard.
$899.99
…for routing multiple parts with a template. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers for template work.
From $32.97
Instead of chopping at the wood fibers at a 90 angle, the shear angle cutters on these bits slice through stock at a slight angle, producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain or cross-grain…
From $34.99
Solid Carbide Flush Trim Router Bit is a fantastic value. This bit is competitively priced while offering high performance and long life.
(Reg. $24.39)
Now $18.29
SAVE 25% TODAY!
Two flutes for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting. Carbide-tipped. Shank is 1/4" in diameter, bearing is 1/2" diameter and cutter depth is 1/4".
$18.99
…-sharp shear-cutting bits along with different bearing combinations to remove exactly 1/16", 1/8", or 3/16" of material in just two router passes-all without a straightedge! Each kit includes one carbide router bit and five bearings to set up the various depths of cut. The Small Bit Kit is perfect for…
From $49.99
…on both surfaces of the rabbet. Steel pilots can be removed from bits and used with edge guides for wider rabbets. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.Rockler numbers 31421, 33592 include multiple bearings for a variety…
From $57.47
…bits because of the precise shear and hook angles.End of bit relief allows for fast plunging.Cuts all composite materials, plywoods, hardwoods, and softwoods.Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.(Click "More Info" above for specific router bit…
From $18.47
Top quality bits that meet the high demands of Rockler Woodworking and Hardware. Bit has two flutes and 5/8" ball bearing guide. Use to trim cabinet face frames flush with cabinet sides - decorative V-groove conceals the seam.
From $21.99
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
(Reg. $24.39)
Now $18.29
SAVE 25% TODAY!
…dadoes. Freud's Mortising Bits are designed with deep center gullets for maximum material removal without chip loading.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
From $18.47
Application: Offers a mix of woodworkers' favorite bits, including "V" grooving, flush trimming, chamfering and dovetailing. All bits have 1/2" shanks.Set comes in Freud's unique shadow box case that can hang on the wall or mount on the bench to keep bits handy and safe.Cuts all composition materials, plywoods…
$220.47
…system guarantees a flush working area and keeps the heavy-duty aluminum router plate (included) secure while cutting. Plus, you get Bench Dog's 32" ProFence, a precision-milled aluminum fence with two MDF sub-fences, T-tracks on both sides, a 2-1/2" dust port and an integrated bit guard. To choose an…
$599.99
…bit for pattern routing because the best face goes down while cutting, with templates attached to the top. 1/2" shank.Application: Cutting mortises and routing deep blind holes Freud's solid carbide up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits.…
From $51.47
The ultimate high-performance straight bit eliminates chipping on both sides of the workpiece. Ideal for pattern routing on double-sided panels, edgework, mortises and more. Solid Carbide. 1/2" shank.Application: Fine finish, chip-free routing indouble-sided veneers and laminates. Combination of up and…
From $81.97
…solid carbide down spiral bits are ideal for smooth, chip-free routing where chip removal is not a problem. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
From $50.97
…Bottom Bearing Bits let you rout half the curve in one direction, flip the work piece over and rout the other half in the opposite direction without repositioning your pattern. Perfect for templates placed above or below the work piece, or to trim laminates or veneer perfectly flush with countertops…
$46.47
…router table. Its 12-point plate-leveling/locking system guarantees a secure, flush interface with the included heavy-duty aluminum router plate. Plus, you get the 32" ProFence, a precision-milled aluminum fence with two MDF sub-fences, front and rear T-tracks, a 2-1/2" dust port and an integrated bit…
$999.99
…doing pattern work. These are the bits to rely on for a smooth, burn-free cut. Two flutes provide faster cutting and three flutes yield a superior finish. Cuts all composition materials, plywoods, hardwoods,and softwoods. Use on portable or table-mounted routers.
…router table. Its 12-point plate-leveling/locking system guarantees a secure, flush interface with the included Bench Dog ProLift Router Lift. Plus, you get the 32" ProFence, a precision-milled aluminum fence with two MDF sub-fences, front and rear T-tracks, a 2-1/2" dust port and an integrated bit…
$1,249.99
…materials.Application: Producing panels from 3/4" stock that are flush with the doorframe for a professional, architecturally correct appearance Exclusive Quadra-Cut design combines a backcutter with the smooth cuts of Freud's 2+2 RaisedPanel Bits.Shims are included to allow adjustment of tongue thickness…
$119.97
|
Need Help? |
(0 Items)
