This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD® coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to 2-3/4"…
From $38.47
In many woodworking shops, one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance…
From $71.47
…This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate ripping blade, there is no need for stabilizers.The Perma-SHIELD coating covers the blade plate and cutting edge in a protective layer, reducing heat build…
From $69.97
This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut. These blades are precision balanced and can be used in gang-rip operations. The ideal working range is from 3/4" to 2-3…
From $57.47
…multi-purpose blade will cut stacks of manmade wood products as well as hardwood and softwood up to 2-3/4" thick. The blade's deep gullets and TCG rip and crosscut through hardwoods and softwoods with ease. Although the ideal working range is 1/2" to 2-3/4" thick, thinner or thicker materials may be…
From $68.47
Quantities are limited! Offer valid while supplies last!This twin pack of Freud blades includes a 24T General Purpose Blade for ripping and dimensioning, and an 80T Ultra-Fine Crosscut Blade for the fine finishing cuts on intricate molding and joinery. Both blades feature thin-kerf technology, which…
(Reg. $119.99)
Now $79.99
SAVE 33% TODAY!
With a unique triple chip tooth design, this 10" blade leaves extremely smooth, true surfaces for glue and finish work. Ideal for ripping hard and soft woods 1/8" to 1" thick.
$59.97
This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut. These blades are precision balanced and can be used in gang-rip operations. The ideal working range is from 3/4" to 2-3…
From $51.47
This blade is ideal for high-speed ripping operations in hardwood and softwood. The low tooth count also makes this blade ideal for ripping thick material. It can be used with manual feeding as well as with power feeders in single or gang-ripping operations. The ideal working range is 1-1/2" to 3-1/2…
From $64.97
…This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate ripping blade, there is no need for stabilizers. The Silver I.C.E. (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than…
$62.97
In many woodworking shops, one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance…
From $61.97
…helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to 2-3/4" thick.Freud has customized their LU87R blade especially for track saws. The 20 hook angle allows for a smooth, easy cut with a handheld saw. At 160mm in diameter…
$32.97
…hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may occur. The Silver I.C.E. (Industrial Cooling Element) coating helps resist…
From $54.97
The ultimate combination blade is now available in a thin kerf design with Freud's LU83R. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti…
From $49.97
…hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may occur.The Perma-SHIELD coating covers the blade plate and cutting edge…
From $40.97
…features dial hub for shim-free adjustability and laser-cut blade plates for extreme accuracy. Micro-grain carbide is designed specifically for glue line rips to ensure superior cut and maximum life. With precision-ground arbors for precise blade alignment.
$274.97
Freud engineers have discovered the ultimate combination of fused tooth grind geometry, blade body rigidity, precise tensioning, a special carbide blend and superior carbide brazing, non-stick Perma-SHIELD coating and high performance anti-vibration - all working together in concert to provide the ultimate…
$99.97
…materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may occur.Freud has customized their LU86R blade especially for track saws, giving this blade extra hook angle. The 12…
$41.97
…stock. Use it with dimensioned stock where speed is more important than surface quality. The ideal working range is from 1/4" to 1-1/4" thick for ripping and 1-1/2" to 3-1/2" thick for crosscutting. Thicker or thinner material may be cut, but some loss of surface finish may occur. The Silver I.C.E.…
From $96.47
Freud engineers have discovered the ultimate combination of fused tooth grind geometry, blade body rigidity, precise tensioning, a special carbide blend and superior carbide brazing, non-stick Perma-SHIELD coating and high performance anti-vibration - all working together in concert to provide the ultimate…
$79.97
(0 Items)