…the picture, nothing beats the simplicity and utility of a router template guide bushing. With no moving parts to break, router bushings pump out part after identical part, and are never worse for wear. These guide bushings are available in a wide range of diameters (see below) for different bits, dovetail…
From $7.79
…/16" diameter center hole.Also available from Rockler, the Guide Bushing Router Plate (sold separately). Affordably priced and designed with maximum utility in mind, this router plate features a 1-1/4" center opening to accept guide bushings and a ring of external mounting holes which forms multiple…
From $41.99
…useful with this Router Bushing Set! Turns your router into a precise cutting tool for duplication work, cutting dovetails, cutting custom signs, or following your favorite templates. Includes 1/2" and 1/4" Dovetails, a Stanley F 3, Butt Hinge, Lock Face, two general bushings, and two locking nuts. All…
$43.99
…each hole makes it easy to align the template with your pencil marks. Includes 13 circle sizes and two oval sizes. Use with the 5/8" Short-Shank Guide Bushing, which is specially designed for 1/4" template stock.
$37.99
Affordably priced and designed with maximum utility in mind, this router plate features a 1 - 1/4" center opening to accept guide bushings and a ring of external mounting holes which forms multiple patterns to allow attachment to most popular routers. Six additional holes are dispersed evenly around…
$11.49
…simple. Just screw it on, rout and repeat! Can be adjusted for either 3mm or 5mm tabs. Designed for Blum hinges. Use with the 5/8" Short-Shank Guide Bushing, (specially designed for 1/4" template stock) and a 1/2" spiral upcut bit.
$17.99
This handy attachment allows you to change the Bosch RA Series templateguide bushings without tools-just slide the lever aside and drop the bushinginto place for a firm connection. The adapter also accepts the Bosch RA-1100(37072, sold separately) so you can use your conventional threaded guidebushings…
$6.99
Template Guides for your Festool OF 1400 Router. Copy rings or Guide Bushings. Quick-release rings click on in an instant for precise pattern routing.
From $14.00
Save more than 50% compared to other edge guides! Perfect for simple flutes, dados rabbets, and more. The Plexiglas tool is easy to set and adjusts from 0 to 7 inches. The 3/4 inch x 5/8 inch fence can be used on a table surface.
$37.99
…added convenience, use with our Picture Hanging Keyhole Template. Recommend using the 3/8" Hanging Slot Router Bit (92024) and 5/8" Short Shank Guide Bushing and Nut (38756) with the template. (Sold Separately)Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
From $14.99
You can cut both the inlay and the opening with just one template. The inlay will fit into the opening with absolute precision. Maximum 3/16" depth of cut. Use with Porter Cable, Black and Decker and similar bases.Looking for a simple system to make inlaying faster and easier than ever? Check out…
$37.99
…efficiently removes chips and provides superior bit visibilitySpindle lock button allows one-wrench bit changesIncludes:1/4" and 1/2" colletstemplate guide bushing adapterwrenchFeatures & Benefits:Full wave electronic variable speed motor with soft start runs at 8,000-24,000 rpm with constant speed under load…
$285.99
…signs quickly and easily with your router in Comic Sans font! Now includes Free Plastic Guide Bushing! The templates interlock to form a stable pattern as you rout signs with appropriate carbide router bits and bushings (3/8" for 2-1/4" kits). Secure patterns to your work surface with masking tape, Self…
From $22.99
Accepts industry standard two-piece threaded guide bushings.
$25.00
Assorted Accessories for Festool OF 1400 EQ Router
From $18.00
…two different heights and include 99 template pieces (letters, numbers, symbols, and kerning spacers). Included brass guide bushing is a vast improvement over the plastic bushing that was included with previous Rockler Sign Making Templates. Recommended for use with plunge router.New Features for the…
From $49.99
Cut flawless circles from 10" to 52" in diameter without complicated math equations! The Rockler Circle Cutting Jig sets up in minutes and mounts quickly to many popular routers made by Porter Cable, Makita, Hitachi, DeWalt, and Bosch. Or, easily drill your own holes to custom fit any router.…
$39.99
…symmetrical so you can switch easily from left to right. The long slot increases your horizontal adjustability. Use with the 5/8" Short-Shank Guide Bushing, (specially designed for 1/4" template stock) and a 3/8" Hanging Slot Router Bit.
$11.59
Accepts industry standard two-piece threaded guide bushings.
$25.00
Guide bushings for the Festool OF 1010 EQ Router.
From $14.00
Accessory sub-base for Porter Cable 450 and 450PK Compact Routers (#41766 and #41462). May be used for templates. Accepts standard 1-3/8" template guide bushing.
$5.99
…clear acrylic frame holds the inlay template in place and gives your router a stable surface to run on, while the spiral bit, template guide and removable bushing allow you to cut both the inlay and recess with the same template. The system includes a blank acrylic template insert that you can custom…
$54.99
The Porter-Cable standard router edge guide provides controlled cuts for consistent results. It uses the straight edge of the work-piece to guide the router for edge cuts, as well as inside cuts. This edge guide is easy to set up and adjust with simple thumbscrew clamps. It fits Porter-Cable routers…
$22.99
…routing jobs woodworkers encounter! Offers easy tool-free installation onto any router baseplate that accepts a standard Porter Cable template guide bushing. 2-1/2" O.D. dust port.
$15.99
Easy to use, the Porter-Cable 42690 Edge Guide provides an accurate edge guide to help you make straight, precise cuts. Built with an anodized, extruded aluminum body for extra strength. The dual sliding body also has lockable mounts to allow for easy operation. Includes all mounting hardware. Compatible…
$49.99
(0 Items)