…existing 1/4" hex-shank drill bits or driver bits into one of these extensions. The 12" extension allows most people to reach an 8' ceiling without a ladder, and you can even line them all up for 21" of reach! Not for use with impact tools. Each extension includes a 1" #1 Plain Hex Phillips Bit and…
From $7.99
…greater stability. Each leveler has load-bearing capacity of 600 pounds. Adjust to within 2-1/4" . Minimum installation height is 3". Requires 5mm hex wrench to adjust.
$25.99
…assembly and disassembly of knock-down furniture.Cap Nut shown is sold separately and fits all length bolts available below.1/4" - 20 thread with 4 mm hex driveSold in packs of 8
From $4.49
…hex-keys and screwdrivers for repairing electronics,bikes, appliances, and more around the home, garage, and workshop. Includesthree folding multi-tools with heavy-duty, anodized aluminum handles,and chrome-finished blades that resist rust and corrosion. Pen-style pocketscrewdriver accepts 1/4" hex…
$19.99
Precision-ground edges and flute design cut precise edges that don't require sanding! Suitable for both soft and hardwoods.
From $13.69
This 16-piece set includes all the essential hex key sizes. With separate rings forstandard and metric, it makes finding the right key easy. All 16 wrenches are madeform carbon steel. Metric keys are black. Standard keys are nickel plated.Limit 1 per Customer
$8.99
…for use with magnetized hex-drive bit holders. Made from hardened tool steel for maximum durability.Technical Details Available in two tip sizes and three lengths Made from hardened tool steel What's in the Box One Phillips power bit.Best Used With Magnetic Bit Holder for Hex Drives. Available below…
From $1.59
…a variety of bolt-in-track accessories. It features Bench Dog's innovative Universal T-track, which accepts 1/4" and 5/16" T-bolts as well as 5/16" hex bolts. Mounting hardware not included.
$20.99
…more, plus two top-mounting aluminum Universal T-tracks that will equip your fence to handle any accessory with 5/16" T-bolts, 1/4" T-bolts, and 1/4" hex bolts. (Fence not included).
$33.99
…with these. Screw thread is self tapping.Has a centering tip to align screw with pilot hole.Ideal for particle board. Statuary bronze finish. Use 4mm hex drive. Requires a 7/32" pilot hole. 8 per pack.
From $3.49
Use for a tight grip! Larger teeth give increased holding strength, ideal for end grain and particle board applications. Made of die cast zinc alloy. Has a self tapping harpoon thread. Thread listed is the size of the internal thread size. Sold in pack of 8.
$6.99
Bright, durable zinc coating will keep these finished hex nuts looking clean and corrosion-free for years to come. Choose from three sizes, each in packs of eight.
From $0.49
Use this 4 mm Hex Head Power Bit to install connector bolts and cap nuts. Recommended for use with a magnetic drive bit holder. Made from hardened tool steel for maximum durability.Whats in the BoxOne 4 mm hex head power bit.Best Used With Magnetic Bit Holder for Hex Drives. Available below (Item # 43448…
$1.59
You'll never drop a screw again with the 1/4" Hex x 3" Magnetic Bit Holder from Lutz®! A strong magnet holds the bit inside the socket while you work. Made from heat-treated S-2 tool steel for durability.
$3.29
These Phillips hex bits are specially heat-treated for durability when usedwith impact drivers such as the Festool TI 15 Hybrid Drill Driver (45010, soldseparately). They are composed of the finest materials, so you get proper fit,reduced runout, and an incredibly long life. They can be used with standardbit…
$15.00
These Torx hex bits are specially heat-treated for durability when used withimpact drivers such as the Festool TI 15 Hybrid Drill Driver (45010, soldseparately). They are composed of the finest materials, so you get proper fit,reduced runout, and an incredibly long life. They can be used with standardbit…
$16.00
These Torx hex bits are specially heat-treated for durability when used withimpact drivers such as the Festool TI 15 Hybrid Drill Driver (45010, soldseparately). They are composed of the finest materials, so you get proper fit,reduced runout, and an incredibly long life. They can be used with standardbit…
$16.00
These hex cap screws are used to fasten nearly all types of hard materials, especially useful in metal-to-metal connections, or where heavy-duty fastening is required. Commonly used with flat or lock washers. Corresponding nuts are included. Available in a range of sizes to suit your needs
$1.29
These Phillips hex bits are specially heat-treated for durability when usedwith impact drivers such as the Festool TI 15 Hybrid Drill Driver (45010, soldseparately). They are composed of the finest materials, so you get proper fit,reduced runout, and an incredibly long life. They can be used with standardbit…
$15.00
These Torx hex bits are specially heat-treated for durability when used withimpact drivers such as the Festool TI 15 Hybrid Drill Driver (45010, soldseparately). They are composed of the finest materials, so you get proper fit,reduced runout, and an incredibly long life. They can be used with standardbit…
$16.00
These Torx hex bits are specially heat-treated for durability when used withimpact drivers such as the Festool TI 15 Hybrid Drill Driver (45010, soldseparately). They are composed of the finest materials, so you get proper fit,reduced runout, and an incredibly long life. They can be used with standardbit…
$16.00
A unique hex-shank lets you use this 3/8" diameter bit in Kreg's innovative Quick-Change Chuck (also works with standard chucks). Specifically designed for pocketholedrilling, with a pilot tip and a durable, one-piece design.
$17.99
…drill bits and countersinks are made of high-quality high speed steel (HSS). Both tapered bits and countersinks are removable and adjustable. Hex collars and hex shanks fit our Rockler exclusive Insty-Driver.Nine-piece countersink set shown includes 3 countersinks with tapered drill bits perfectly matched…
From $7.19
Square drive power bits have a hardened steel tip that guarantees a perfect fit and last longer with less stripouts. 1/4" hex shank.Magnetic Bit Holder has hex shank. Magnetizes drive bits.
From $1.59
(0 Items)
