…new or existing cabinets. Drills holes either 1-7/16" or 2-1/2" from edge. Insert shelf pin in top or bottom position to extend jig for continuous drilling.Shelving Jigs measure 20" longAdditional Self-Centering Bits available.
$36.99
Drill concealed hinge cup holes with ease and accuracy using the Concealed Hinge JIG IT System! Use it to easily locate center, and drill cup holes on cabinet doors for fully concealed hinges. Use our Mounting Plate JIG IT templates (sold separately) to accurately align holes for hinge mounting plates…
$41.99
Build your own jigs with our JIG IT hardware value pack. Assorted T-bolts, knobs, and inserts for customizing your own jigs and fixtures for your shop.
$31.99
Marking screw holes becomes simple, quick and accurate! Creates absolutely accurate spacing for pull borings.
$19.99
Eliminate the possibility of misaligned shelves and cut your setup time in half with the easy-to-use Pro Shelf Drilling Jig! Just lay the jig on your stock, tighten the two horizontal tracking knobs and start drilling error-free rows.Guarantees each row is perfectly in lineSpaces each hole exactly 37mm…
$84.99
For use with the Concealed Hinge JIT IT System. Use our Mounting Plate JIG IT® templates to accurately align holes for hinge mounting plates. Requires Centering Bit (68991, sold separately). Choose from 5 different templates; see "More Info" tab for application information.
From $14.99
The exclusive JIG IT Drill Guide can be used with a drill press or a hand drill to ensure perfectly aligned holes everytime! Use with our Long Shank Forstner Bits (sold separately) to drill flat-bottomed holes.
$16.39
The ultimate panel cutting accessory! Developed by acclaimed woodworker Lonnie Bird, Panel-Loc is a combination hand guard and panel hold-down that provides safer and better cuts when routing raised panels. Orange push blocks not included.
$52.99
…block into the jig to provide an accurate guide for your chisel. With a 3-1/2" width capacity, it will easily handle the large joints found in tables, chairs and big casework. Slide the guide block along the rails to place your mortise precisely where you want it. Includes Beadlock Pro Jig, 3/8" drill bit…
$137.99
…jig allows you to rip thin strips on the left side of the blade, eliminating the danger of pushing narrow strips between the saw and fence. Since the strip is not trapped between the blade and fence, there is also less risk of binding and kickback. It's simple to use; a single knob locks the jig into…
(Reg. $26.99)
Now $19.99
SAVE 25% TODAY!
…benchtop design, compatibility with all Kreg Jig Master System accessories, even a SkillBuilder™ DVD and rugged carrying case! For strong, convenient, and professional-looking joinery - this is it. Note: In order to attach dust collection to the K4 Jig, a 2-1/2" to 1-1/4" Adapter is required (sold…
From $99.99
…accepts both 5/16" T-bolts and 1/4" T-bolts, as well as 1/4" Hex-bolts. This means you can use all the hardware and T-track accessories from your old jigs in addition to the newer style hardware. The T-tracks are available in 2 ft, 3 ft, or 4 ft lengths. Mounting screws not included.For added versatility…
From $14.99
The easy, accurate way to get perfect-fitting box joints. The Woodsmith Box Joint Jig attaches to any miter gauge and works on any table saw or router table. Use the Freud Box Joint Cutter Set (sold separately, 27371) to make precise joints on your table saw, or our 4-Piece Straight Bit Set (sold separately…
$119.99
…accuracy - whether you're making one door or a hundred! Includes the 30" rail, two alignment plates that mount to the rail,stop block for positioning the jig on the door, one bit guide, stop collar and spring.
$93.99
Make precise, tight-fitting box joints with your router! For use on virtually any router table with a standard 3/4" miter slot, this jig features a smooth-sliding backer sled and three (3) precision-machined aluminum indexing keys to give you air-tight joints with either 1/4", 3/8" or 1/2" spacing. Works…
$79.99
Make drawer box installation for face frame or frameless cabinets a snap!Designed for use with full-extension slides.Brackets feature long toes, support tabs and 1/2" markings.
$9.99
…is the jig for you. With asimple indexed angle setting system, heavy duty hold-down clamps and a smoothsliding design, it makes tapered cuts fast, easy and precise. Perfect for chair legs,table legs and more. Plus, with the miter bar removed it doubles as a stable straightline ripping jig. Includes…
(Reg. $77.99)
Now $59.99
SAVE 23% TODAY!
Jig Now Includes Drill Bit, Stop Collar, and Stop Collar Wrench for Added Convenience!This is an incredibly affordable doweling jig for woodworkers who want a quick joint without a lot of fussy layout. Many doweling jigs require that you make a mark on the inside edge of the joint, meaning you either…
From $19.99
Rockler exclusive JIG IT template makes marking screw holes for knob and pull installation quick, simple and accurate.Offers spacing for 2-1/2", 3", 3-1/2", 3-3/4", 4" and 96mm.Includes 24" aluminum T-slot bar, left to right self-adhesive tape measure, stop block for repetitive drawer pull alignment…
$39.99
Set up your jigs for smooth-sliding action on table saws, router tables, workbenchesand more! These solid aluminum bars have nylon set screws in the miter bar thatadjust in or out for a perfect fit in any standard 3/4" x 3/8" miter slot. Availableindividually in 18" or 24" lengths.
From $19.99
Repetitive flutes are a great way to add style to columns, molding or furniture parts,but machining them can be a true test of patience. Fortunately, this innovative jigmakes it fast and easy to rout perfect flutes with even spacing every time.
$69.99
Trim work will go like clockwork with the only tool on the market used to measure, mark, and install casement trim. With preset reveals and built-in tape measure hook slots, you'll be able to quickly measure all of your trim lengths and accurately cut trim stock for professional results. You'll…
$12.99
Set your router bit to the precise height every time! Simply bring the router bit up through the table and align the jig with the cutting edge of the bit.. This system is ideal for making accurate rail-and-stile construction, lock miter joints and more.
$7.69
…you can create a huge variety of jigs and fixtures. Modular system allows you to interchange parts for anything from simple shooter boards to deluxe crosscut, miter and coping sleds. It's perfect for expensive specialty items like tenoning jigs. Unlike conventional jigs, you can add features or redesign…
From $10.49
(0 Items)
