This adhesive-backed measuring tape is ideal for miter saws, radial arm saws drill presses or anywhere you need accurate, easy to read measurements. Tape is 6 feet long and available in both left-to-right and right-to-left orientations.
$9.99
The first stainless steel rule with micro-fine guide holes for marking a fine dot with a sharp pencil or metal scribe.
From $13.99
When it comes to jointer setups, layout, drafting, lapping the sole of a handplane, or checking lumber for warp, a precision straight edge is an essential tool for the shop. These premium straight edges are meticulously ground and lapped for straightness and parallelism, and they feature a beveled…
From $26.99
Find the exact center of any workpiece up to 12" wide. Has a built-in protractor, too.
$31.99
Easy to use, versatile and precise are the words which best describe the new INCRA T-Rule. Low glare, matte textured background for high contrast and easy legibility.
From $18.99
…maximum speed and precision. It offers four integralslides to transfer mounting points from object-to-wall, level vials to read either levelor plum, and ruled edges graduated to 1/16".
$41.99
We measured this rule with a precision caliper - the display read 6.000" on the dot. Now that's Starrett accuracy! Features 1/32" graduations on the short end of the rule, making it perfect for setting bit and blade heights. Compact size means it will always be handy in an apron pocket. The first two…
$28.99
This unique rule is precisely what you need for layout and measurement along the edge of a board or other workpiece.
From $19.99
…installing casters on furniture, or marking flute lines. One or both t-bars can be easily removed for single edge referencing or flat work. And like all INCRA rules, the easy-to-read no-glare matte finish along with the unique grid layout make finding and leaving your mark effortless.
$31.99
…nearest 1/64" with a Hook Rule! High quality rules are made from hardened and tempered stainless steel and have an adjustable hook that may be used on either side. Use it to measure dimensions from the edge of any board. Precision etched for long life and readability, each rule features 1/8" and 1/16"…
From $9.99
Make marking or cutting arcs, circles and parallel lines easier than ever with the Complete Flat lying Trammel Set!Attaches easily to rules and squaresFlat lyingUnlimited radiusQuick and accurate
$36.99
…as a standard ruler. One face features a precision angle gaugefrom 0-50, while the other has a 6" x 6" center rule along one edge, and a 12" standard rule along the other. The 3" end rule is useful for setting up machinery.
$19.99
…find the corresponding number (7 3/8" ) on the lower scale. Made of durable tempered stainless steel with etched, black-filled numbers in standard markings. American-made.
$13.99
Here's a versatile rule to keep on hand for layout jobs. With a center-finding rulealong one edge and a standard 16" rule along the other, it breezes effortlessly frommeasuring to marking to drafting. The clear acrylic material makes lining up thegraduations with the layout lines fast and accurate,…
$15.99
6" Pocket Ruler with precise graduations down to 1/64 of an inch and 1 mm. Handy sliding hook makes it easy to remember and transfer measurements. Great for aprons and shirt pockets. Measures up to 6" or 150mm.
$5.99
…straight line the fast and easy way with the beam compass. No measuring or ruler needed. The built-in locking tape rule makes set up a breeze. Gauge slides along work for edge marking. The beam compass allows you to draw a 3-1/2 inch to 72 inch radius.
$36.99
Take on a multitude of measuring, marking and layout tasks with just one tool! TheMulti-Mark is a layout tool, T-square, torpedo level, trimming tool, depth gauge andmore all in one unit. A three-way adjustable rule functions as a depth gauge, miterlayout tool or traditional 6" ruler with standard scales…
$19.99
This desk ruler really measures up.Pencil notch on the end is great for marking lines parallel to an edge. Graduated in 1/16ths on one side, millimeters on the flip side. Ruler only. 12" Desk RulerSolid beechGraduated in 1/16ths on one side, millimeters on the flip sideBrass bound edges
(Reg. $13.99)
Now $6.99
SAVE 50% TODAY!
…protractor flush against your work piece for accurate measuring, marking and projecting angles, or remove the fence and use it as a standard protractor. Convenient slots let you mark center points, and the flat edge has a center-finding rule. High-visibility numbers on the inner and outer scales are easy…
$24.99
This simple accessory prevents your tape measure from slipping off the corner while measuring diagonals. The 90 inside corner securely straddles any outside corner, and rotates 360 to accomodate any rectangular object. It attaches easily to your tape with a single, powerful rare earth magnet. Use…
$6.49
…accurately and instantly to within a thousandth of an inch! This compact gauge includes a digital readout in metric or imperial as well as a steel rule. Measures from 0 to 3.2" (0-83mm). Perfect for measuring the height of router bits and saw blades, or measuring for placement of a dado with greater…
(Reg. $25.99)
Now $19.99
SAVE 23% TODAY!
Metal rule depth gauge helps set the height of router bits and saw blades with greater accuracy.Self-standing for setting cutter depth on router tables and low profile for backfence adjustment.
$15.99
Small size is great for the tool box or your pocket!Features sliding dovetail way and rigid construction.4"/100mm rule with vernier scale.Graduated in 1/16" and mm.
$8.99
|
Need Help? |
(0 Items)