…developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods…
From $54.97
…laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needed with…
$94.97
Freud Industrial Series Teflon-coated saw blade. Produces exceptionally clean cuts in veneered plywood and melamine.
From $94.47
You'll get faster feed rates plus absolute splinter control- even on Oak/Birch ply veneers and melamine! Gives you refined cuts every time.
$175.99
This multi-purpose blade will cut stacks of manmade wood products as well as hardwood and softwood up to 2-3/4" thick. The blade's deep gullets and TCG rip and crosscut through hardwoods and softwoods with ease. Although the ideal working range is 1/2" to 2-3/4" thick, thinner or thicker materials may…
From $68.47
The LU96R is a thin kerf blade that is designed to give long life and exellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in…
From $68.97
…laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needed with…
From $90.47
…kickback. The blade tilt scale has adjustable angle indicators for repetitive bevel cuts. Built-in retractable omni-directional caster system mobilizes your table saw. A wide stance, heavy-duty trunnion and concave teeth on the trunnion gears promote easier raising and tilting of saw blade. Poly-V drive…
$4,149.99
Cut cleanly on both sides of your stock with innovative Starrett Dual Cut Bi-Metal Jig Saw Blades! These unique blades combine bi-metal technology with an exclusive pattern of teeth in both directions for a burr-free cut on both sides of the stock. Use them to easily cut intricate shapes and for making…
$8.39
Cut virtually chip-free through veneered plywood, melamine, and laminates with this 7-1/4" blade! Features Freud's TiCo Hi-Density Carbide and Titanium craftsmanship for long life and a flawless finish with every cut.7-1/4" blade with 5/8" arbor
$54.97
…throat plate. Easy to use - just slide it into the miter track and lock in place with a single screw. Measures 10"W x 23-3/4"L x 1/2"Thick. MDF with melamine coating.
$34.99
The LU96R is a thin kerf blade that is designed to give long life and exellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in…
$65.97
This fast-cutting blade is ideal for a perfect finish on one side of laminates and melamines. The Perma-SHIELD® coating makes these blades resistant to friction and heat build-up. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. The 10 hook angle and a triple chip…
From $85.97
…developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods…
$52.47
This heavy-duty production blade produces an excellent finish on the top and bottom of thick laminates and melamine. The LU92M series is ideal for cutting stacked 3/4" laminates and melamine. Each tooth has a special modified triple chip grind design created by computer simulation to breeze through thick…
From $69.47
…blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Fine Tooth Cross-Cut Saw blade for the TS 75 Plunge Cut Saw is an excellent blade for smooth cross-cutting in veneered plywood, sheet goods, melamine, and hard and soft woods. This blade…
$115.00
Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The Fine Tooth saw blade for the Kapex Miter Saw was designed for smooth cross-cutting in veneered plywood, sheet goods, melamine, and hard and soft woods. The Fine Tooth blade incorporates…
$140.00
This blade is specifically optimized to meet the unique demands of laminates, melamine and non-ferrous metals. 84 finely-spaced teeth combined with a robust TCG tooth geometry make chipout problems a thing of the past. The blade also features a thin kerf design, which reduces dust and material waste…
$69.99
…blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Solid Surface/Laminate blade for the Kapex Miter Saw is a long-lasting, high cut quality blade for laminate flooring and solid surface countertop material. The Solid Surface/Laminate…
$135.00
…13/16" with the easy-to-use Oldam 7" Adjustable Dado Blade! Fits most full-size 8", 9", and 10" table saws with a 5/8" arbor and has 16 precision-sharpened carbide tips that cut through hardwood, softwood, plywood, wood composites, and melamine with ease. And Oldham's adjustable hub makes setting widths…
(Reg. $39.99)
Now $14.99
SAVE 62% TODAY!
…standard blades. Made from high-quality, ultra strong phenolic core material covered on top and bottom with low-friction, wear-resistant melamine surface. Includes positioning screws that ensure a precise fit in the table. This unit comes with preformed clearance slots for SawStop blade guard and riving…
$39.00
…achieved in softwood, hardwood, melamine, veneered plywood, chipboard, soft plastics, ABS, HDPE and similar materials. The cross-set teeth design is ideal for fast cuts. For delicate and fine scroll cuts the S 50/1.4 K blade (486564) is recommended instead. Festool jigsaw blades are engineered for cutting…
From $10.00
…eliminating the need for dual blade wrenches. The T-slot miter gauge has rack-and-pinion angle setting, positive stops, and extension plate for expanded workpiece support. The 64B has cast iron table and wings with front edge bevel, and the working area is further expanded by the melamine-surfaced wood extension…
$1,699.99
…eliminating the need for dual blade wrenches. The T-slot miter gauge has rack-and-pinion angle setting, positive stops, and extension plate for expanded workpiece support. The 64B has cast iron table and wings with front edge bevel, and the working area is further expanded by the melamine-surfaced wood extension…
$1,599.99
…Zero Clearance Lock Down Insert can be used on all SawStop Table Saws using 8" dado blades. Made from high-quality, ultra strong phenolic core material covered on top and bottom with low-friction, wear-resistant melamine surface. Includes positioning screws that ensure a precise fit in the table. Features…
$39.00
(0 Items)