…innovative features of the GR-100 but comes with two additional accessories that improve the control and expandability of the GRR-Ripper System. The Micro Jig GRR-Ripper Advanced 3D Pushblock (GR-200) is built to meet the needs of the professional woodworker or extreme hobbyist. With enhanced versatility…
$79.99
With Micro Jig's precision tapering jig, you can cut clean, crisp tapers with precise repeatability in increments as fine as 1/8 of a degree. Cut 2-, 4-, even 8-sided tapered legs as well as tapers for table tops and cabinet parts with a single jig! The Microdial adjustment system features index holes…
$139.99
The GRR-Ripper is a precision, guidance, and 3D Push Block System designed to feed wood on a table saw safer than you can with your hands alone and more accurate and more precise than with conventional push blocks. The results will be better projects with less waste and fingers intact. With its 3…
$59.99
…stabilize your jigs. Guide bars are easily calibratedfrom the top of jigs and fixtures and are easy to retrofit. Includes two guide bars, twoZeroPlay stops and assembly hardware as well as plans to build a table saw crosscutting jig with off cut deflector, jointing fence alignment jig for the router…
$34.99
Improve Table Saw Safety! The affordable Micro Jig MJ Splitter™ system is simple to use, exact, and extremely effective. Produces virtually burn-free cuts!
From $30.99
Micro Jig Splitter SteelPro is constructed from a 100% polycarbonate shell and reinforced with a solid stainless steel core. The SteelPRO employs another groundbreaking innovation for table saw safety and efficacy: The Dual Splitter. This allows the splitters to control the pressure on the keeper piece…
$39.99
Micro Jig Splitter SteelPro is constructed from a 100% polycarbonate shell and reinforced with a solid stainless steel core. Toughest Micro Jig splitter ever, utilizes the same patented technology of the original Micro Jig Splitters. Furthermore, the SteelPRO employs another groundbreaking innovation…
$39.99
Provides four contact points to apply more downward pressure across the entire width of the Micro Jig GRR-Ripper body for better control. Also includes replaceable push foot. Easily installs to the Micro Jig GRR-Ripper Basic 3D Push Block System (GR-100) (sold separately)
$15.99
Each Micro Jig ZeroPlay Guide Bar is composed of two interlocking plastic bars that adjust laterally to theexact width of your miter slot to stabilize your jigs. Guide bars are easily calibrated from the top of jigs and fixtures and are easy to retrofit. The ZeroPlay Guide Bar is a "One-Touch Calibration…
$15.99
Positive stops at 0, 10, 22-1/2, 30 and 45 - and micro-adjustability to 1/100 - give you speed, repeatability and the same accuracy that machine shops strive for!Add to that the perfect, repeatable dimensions you'll get from the precision flip stop, and you can say "goodbye" to mitered joint gaps forever…
$139.00
…shaping high speed steel tools on your bench grinder andtransitioning easily to honing on your Tormek with this microadjustable grindermount. Tormek jigs simply slide off the grinder mount and onto your Tormek whenyou're ready to hone. Installs on the left or right side of bench grinders with wheels6…
$64.00
…own Jigs, fixtures, stops, fences, zero clearance fences and more! Mounts to miter gauges and fences as well. Accepts all standard mounting hardware! One side accepts all standard T bolts and all 1/4" hex. The other side accepts all standard T bolts, all 5/16" and Kreg® clamps. Includes micro adjustable…
From $31.49
Make fast, accurate adjustments in less than to your T-square style table saw fence.Allows for precise dadoes and a perfect fit every time.Three powerful rare earth magnets hold adjuster securely on front rail.Mounts and dismounts in seconds without tools.
$21.99
For use with the Micro Jig GRR-Ripper Basic 3D Push Block System (GR-100) Sold Separately.Additional spacer and stabilizing accessory plate for extra control, ideal for narrow ripping.Attachment kit consists of additional spacer and stabilizing accessory plate for extra control ideal for narrow ripping…
$20.00
Every once in a blue moon you miss the tunnel of your Grr-Ripper push blockand end up nicking the leg. Luckily, thanks to the push block, it's a lot cheaperto replace a plastic leg than a finger (and a lot less painful). All three Grr-Ripperreplacement legs are available: the Center Leg, 1/4" Leg,…
$15.99
More than just a miter stop! Small and versatile, this stop can also lock a jig in place or serve as a lock to secure a hold-down clamp (not included) in the miter slot. Fits standard 3/4" x 3/8" T-Style miter slots.
$7.39
Every once in a blue moon you miss the tunnel of your Grr-Ripper push blockand end up nicking the leg. Luckily, thanks to the push block, it's a lot cheaperto replace a plastic leg than a finger (and a lot less painful). All three Grr-Ripperreplacement legs are available: the Center Leg, 1/4" Leg,…
$14.99
…picture frames, small drawerboxes, etc.). When that's the case this miniature drill guide is ideal. It has a 25%smaller hole diameter and includes a Micro Pocket Drill Guide, Drill Bit and DepthCollar, as well as a Starter Screw Set. Replacement accessories sold separately.
$44.95
…perfect for crown molding and cabinet installations, putting up a plastic dust barrier, and as a truck load stabilizer. Features fully articulating, micro adjustable top and bottom feet, quick-release lever, and ball detents for positive locking every foot. Heavy-gauge main shaft and 150 lb. load capacity…
From $41.99
…your project or when building miniatures. Precision, safety, and confidence with the GRR-Ripper. 1/8" side leg attachment easily installs to the Micro Jig GRR-Ripper Basic 3D Push Block System (GR-100) (sold separately) with included hardware, creating a 3/8" tunnel to enable table saw rips as thin as…
$15.49
…fast and easy reshaping of new or damaged chisels and planes (up to 2" wide), and fast honing of a micro bevel. Bevel angles are adjustable and are set in the sharpening port (not in a fixture or jig) so switching between angles is simple and fast. With maintenance-free tempered glass grinding wheel…
$199.99
…action with easy, micro-fine depth adjustments, and a rotating 7-step turret-style depth stop. It also features a clear sub-base that provides excellent visibility, and a precision centering system that makes it easy to center the sub-base in relation to the bit when using jigs and templates. For those…
$181.99
…been eagerly holding their horses for the new Bosch PR011 Plunge Base, and now it's here. Offering extraordinarily smooth plunge action with easy, micro-fine depth adjustments, the PR011 also features a rotatating 7-step turret-style depth stop with two adjustable stops. The plunge lock lever is easy…
$99.99
…aviation grade billet aluminum, with a hard anodized finish for protection. Detent positions for the stop arm's up and down positions are controlled with micro ball plungers with stainless steel balls.
$129.00
This jig is made especially for long and thin knives. It works in the same way as the SVM-45 jig but it is wider and therefore gives more support to long and thin blades. The jig rests on the Universal Support. The exact edge angle is set by rotating the stop or with the Micro Adjust on the Universal…
$54.00
(0 Items)