Cap nuts work with connector bolts for surface to surface application. Use these with 1/4", #20 thread connector bolts. 11/16" long. Can be used with 5 mm hex driver.8 per pack.Bolt shown is not included with cap nut.
Solid brass connector bolts, cap nuts and cross dowels are great for indoor or outdoor furniture.
Bright, durable zinc coating will keep these finished hex nuts looking clean and corrosion-free for years to come. Choose from three sizes, each in packs of eight.
Tee nuts provide a quick and easy method for mating machine threaded components to wooden parts. Simply drill an appropriately sized clearance hole for the threaded barrel and hammer into place. Tee nuts are made of high quality steel and available in a variety of sizes.
Screw-on tee nuts are ideal for mating machine threaded components with wood parts. The screw-on flange provides a positive lock against rotation and ensures that tee nuts wont drop out with use, making them the preferred method for installing threaded furniture levelers and glides.
3-Prong T-Nuts provide a quick and easy method for mating machine threaded components to wooden parts installing threaded glides, casters, and more. Simply drill an appropriately sized clearance hole for the threaded barrel and hammer into place. Made of high-quality steel and available in a variety…
…Clamping Kit to secure the Kapex sliding compound miter saw to the Festool Multifunction Table. Hex bolts drop into the Kapex deck base as captured nuts, and are easily secured beneath the MFT with the oversized knobs. Pack of 2 clamping knobs with bolts.
Heavy-duty, easy-to-install steel vise will be the workhorse of your custom workbench! Machined pivoting nut engages or releases with a 1/4 turn of the 1" dia. main screw so you can easily re-position your workpiece. Extra-wide 12" O.C. guide rods provide maximum resistance to racking, while extra-wide…
…Black Oxide finished steel bolts for joining wood together. Ideal knock-down fitting for rapid assembly and disassembly of knock-down furniture.Cap Nut shown is sold separately and fits all length bolts available below.1/4" - 20 thread with 4 mm hex driveSold in packs of 8
…the bench so that you can slide your workpieces around unimpeded by the tray, and the rounded trough makes it easy to scoop out small parts such as nuts and bolts. It makes the perfect spot to keep commonly used items, especially items that tend to roll, such as hardware, drill bits, drill drivers, screwdrivers…
…different bits, dovetail jigs and other template routing applications. They fit perfectly in any router base with a 1-1/4" diameter center hole. Locking nuts are sold separately (#63107).
…Aprons. Pointed end of hanger bolt screws into a pilot hole in wooden member, while the other serves as a machine threaded stud that accepts a nut, T-nut or threaded insert. Deep screw threads bite into the wood to eliminate stripping and pull-out problems. See below for individual sizes. 8 per pack…
…an excellent solution for organization, storage, and transport of fasteners, hardware, and other small project components (screws, washers, nails, nuts and bolts, hinges, knobs and more). Twelve Small drawers can be accessed from both sides, and each features its own latch, ensuring that drawers don't…
…when assembling a project with T-nuts, it's all too easy to push the T-nut out the back of the workpiece once the bolt is inserted, sometimes resulting in the prongs stripping out the wood. The Riveting T-Nut system prevents this problem by permanently securing the T-nut to the panel with the Riveter Insertion…
…chuck required! This Pen Turning Mandrel system includes a #1 morse taper arbor for use with a #1 morse taper lathe, 7 mm mandrel shaft and knurled nut. Also available for #2 Morse Taper Lathe.
SAVE 18% TODAY!
…provide a stop for your circularsaw or router when using the clamp as a guide. Plastic housing fits the T-Tracks of theContractor Clamps and a wing nut tightens to secure the block in place at the desiredposition along the clamp.
Use this 4 mm Hex Head Power Bit to install connector bolts and cap nuts. Recommended for use with a magnetic drive bit holder. Made from hardened tool steel for maximum durability.Whats in the BoxOne 4 mm hex head power bit.Best Used With Magnetic Bit Holder for Hex Drives. Available below (Item #…
When you need a wing nut but want something a little more decorative and easier to handle, reach for these 1/4" x 20 Solid Brass Knurled Knobs! The ribbed edge of the knob makes it easy to tighten or loosen and works very well on marking tools, using with T-tracks, or any other finger-tightening applications…
…angled stock. Available in two stud lengths. The extra-long 6" foot is ideal for use on a miter gauge or wherever extended reach is needed. Includes nuts and washers.Clamps sold separately.
Brass 20W bi-pin hanging canopy light, ultralife bulb, lensed, 36" chain, silicone wire nuts. Lifetime Warranty
A screw with a coarse wood thread used for easy ofassembly & disassembly of case furniture- Cannot use a nut with these. Screw thread is self tapping.Has a centering tip to align screw with pilot hole.Ideal for particle board. Statuary bronze finish. Use 4mm hex drive. Requires a 7/32" pilot hole. 8…
…or screw on type. Nail on type has 3/4" long nail. Screw-on glides have 1/4"-20 threading x 1" long bolt and require1/4"-20 threaded inserts or t-nuts (not included). Polished nickel base with rubber cushion for shock absorption.Four glides per set
…ensures a rigid link with no twisting or unwanted movement and provides a stable base to prevent tipping. Includes Aluminum Clamp Extender, 2 bolts, 2 nuts and 4 washers. Note: The Extender is compatible with the newer K Body Clamps, which feature a black swivel foot-pad (and a hole) opposite the handle…
…an excellent solution for organization, storage, and transport of fasteners, hardware, and other small project components (screws, washers, nails, nuts and bolts, hinges, knobs and more). Six Small and three Medium drawers can be accessed from both sides, and each features its own latch, ensuring that…
…connections between table rails quickly and easily. Nogluing and no clamping required. Made from solid steel. Installation requires hangerbolts and wing nuts, not included. Size is 2-5/8" x 3-3/8" Flat. Sold in packs of four.