…identify loose screws or you just want to figure out which nuts and bolts to use where, the Thread Detective is the perfect tool. Available in standard or metric, it features clearly marked gauges for quick identification ofbolt size, nut diameter and thread pitch. Standard gauges are black with 14…
$17.99
…Kapex sliding compound miter saw to the Festool Multifunction Table. Hex bolts drop into the Kapex deck base as captured nuts, and are easily secured beneath the MFT with the oversized knobs. Pack of 2 clamping knobs with bolts.
$20.00
A screw with a coarse wood thread used for easy ofassembly & disassembly of case furniture- Cannot use a nut with these. Screw thread is self tapping.Has a centering tip to align screw with pilot hole.Ideal for particle board. Statuary bronze finish. Use 4mm hex drive. Requires a 7/32" pilot hole. 8…
From $3.49
Cap nuts work with connector bolts for surface to surface application. Use these with 1/4", #20 thread connector bolts. 11/16" long. Can be used with 5 mm hex driver.8 per pack.Bolt shown is not included with cap nut.
$5.39
Bright, durable zinc coating will keep these finished hex nuts looking clean and corrosion-free for years to come. Choose from three sizes, each in packs of eight.
From $0.49
…ensures a rigid link with no twisting or unwanted movement and provides a stable base to prevent tipping. Includes Aluminum Clamp Extender, 2 bolts, 2 nuts and 4 washers. Note: The Extender is compatible with the newer K Body Clamps, which feature a black swivel foot-pad (and a hole) opposite the handle…
$19.99
Rail bolt fastener with plugs fastens hand rails to newel posts and walls. Hides bolt hole under hand rail, and requires no glue, nails or screws. Includes 5/16" x 3-1/2" rail bolt, flanged nut, curved washer and two hardwood plugs to conceal drill hole (choose plug that best fits project). Fastens…
$6.99
…and a hardened scriber. The blade is machine divided, hardened and tempered with a reversible lock bolt that allows the blade to be turned over or end-for-end without removing the lock bolt or nut. This assures true alignment of the blade and head.
$99.99
These steel Hanger Bolts are ideal when you want the strength and easy assembly of a bolted connection on a wooden joint. Hanger Bolts are perfect for knockdown furniture, and for joining table legs to aprons when used with our Corner Brackets for Table Aprons. Pointed end of hanger bolt screws into a pilot…
From $2.49
…nut fitting on most hold-down toggle clamps! Change depth-of-pressure in seconds with the adjustable rubber foot, and for movement in-and-out along the arm just loosen a single set screw and adjust away. A comfortable locking knob caps it all off.Available in two sizes, 5/16" and 1/4", based on bolt-…
$3.99
Heavy-duty, easy-to-install steel vise will be the workhorse of your custom workbench! Machined pivoting nut engages or releases with a 1/4 turn of the 1" dia. main screw so you can easily re-position your workpiece. Extra-wide 12" O.C. guide rods provide maximum resistance to racking, while extra-wide…
$179.99
Solid brass connector bolts, cap nuts and cross dowels are great for indoor or outdoor furniture.
From $5.69
…recommended that #14 gauge pan head (self-tapping) screws be used for mounting. If greater strength is needed, mount swivel plates with machine bolts and nuts through the base and seat/turn table.
$20.99
Statuary Bronze or Black Oxide finished steel bolts for joining wood together. Ideal knock-down fitting for rapid assembly and disassembly of knock-down furniture.Cap Nut shown is sold separately and fits all length bolts available below.1/4" - 20 thread with 4 mm hex driveSold in packs of 8
From $4.49
Quantities are limited! Offer valid while supplies last! Not available in stores.An incredible value with an assortment of 47 driver bits, including 14 premium cold forged Torsion bits. Bit set includes, among others, phillips, flathead, torx, square-drive, sockets and a handy flip-out case. Don't…
(Reg. $26.29)
Now $14.99
SAVE 42% TODAY!
…excellent solution for organization, storage, and transport of fasteners, hardware, and other small project components (screws, washers, nails, nuts and bolts, hinges, knobs and more). Six Small and three Medium drawers can be accessed from both sides, and each features its own latch, ensuring that drawers…
From $8.00
…quick and easy with the 1/4" reversible shaft thataccepts the included reversible #1/#2 square and slotted/#2 Phillips bits. Shaft alsoserves as a 1/4" nut driver.
$15.49
Quickly and easily size bolts, screws, nuts and twist drills! Bolt Size-It also features ruler marked with inches and millimeters.Gauge metric hex nuts and washers by holding under metric holes.Resists water, alcohol, oil and grease.Hard plastic.
$5.49
…especially useful in metal-to-metal connections, or where heavy-duty fastening is required. Commonly used with flat or lock washers. Corresponding nuts are included. Available in a range of sizes to suit your needs
$1.29
An assortment of 336 nuts, bolts, screws and washers for a variety of projects in the shop or around the house. All included hardware is zinc-plated.
$8.99
Screw-on tee nuts are ideal for mating machine threaded components with wood parts. The screw-on flange provides a positive lock against rotation and ensures that tee nuts wont drop out with use, making them the preferred method for installing threaded furniture levelers and glides.
$9.79
Wing nuts provide an easy, tool-free way to loosen, tighten, assemble and disassemble your jigs, fixtures and projects. These are cold-forged for strength and fitted with smooth threads so you can simply spin and cinch them tight with your fingers. Great for any application where finger-tight is tight…
$1.29
Includes an assortment of nuts and flat washers for a variety of projects in the shop or around the house. Nuts come in a range of sizes, both with and without the nylon locking insert.
$8.99
Use this 4 mm Hex Head Power Bit to install connector bolts and cap nuts. Recommended for use with a magnetic drive bit holder. Made from hardened tool steel for maximum durability.Whats in the BoxOne 4 mm hex head power bit.Best Used With Magnetic Bit Holder for Hex Drives. Available below (Item #…
$1.59
Provide a collapsible yet stable base for table legs and a table umbrella with this sturdysteel box. Simply bolt your table legs to the box through the existing holes with theincluded nuts, bolts and washers. Legs fold out to attach to your table top and foldup for slim, convenient storage when detached…
(Reg. $21.99)
Now $5.00
SAVE 77% TODAY!
(1)