…designed to eliminate splitting and features a chrome/zinc finish. Square drive head has a flat bearing surface, semi-elliptical top and self-tapping wood auger tip. It is designed to eliminate splitting. Heat treated pan head screw uses a #2 square drive.100 per pack.
…resistance than zinc-plated screws.Self-tapping screw tips make for easy driving Case hardened steel won't bend or break Deep-seated #2 square drive heads eliminate "cam out," ensuring a tight, solid joint
…for bar stools, smaller TV sets and more, this swivel delivers smooth rotation and holds its position well. Note: It is recommended that #14 gauge pan head (self-tapping) screws be used for mounting. If greater strength is needed, mount swivel plates with machine bolts and nuts through the base and seat…
…hole joinery, and now comes in a new and improved case. Includes #6 x 1" pan-head fine (150), #7 x 1-1/4" washer-head fine (150), #8 x 2-1/2" washer-head coarse (75), #8 x 1-1/4" washer-head coarse (150), and #7 x 1" pan-head coarse (150). All screws feature a self-tapping tip and deep, #2 square drive…
Carry this compact kit with you so you'll always have the pocket hole screw for every job! Includes some of Kreg's most popular weather-resistant Blue-Kote screws in a durable easy-to-carry case. All feature deep #2 square drives and a needle-point self-tapping tip. Includes 450 pocket hole screws…
A protective and decorative light angle corner for the edge of trunks. Center Corner is 1-3/4" x 1-1/2". Supplied with #7 x 5/8" pan head screws. Set of 4. Plated.
A screw with a coarse wood thread used for easy ofassembly & disassembly of case furniture- Cannot use a nut with these. Screw thread is self tapping.Has a centering tip to align screw with pilot hole.Ideal for particle board. Statuary bronze finish. Use 4mm hex drive. Requires a 7/32" pilot hole.…
…Recommended for use with ACQ treated lumber. Designed for theKreg® Deck Jig System (36613, sold separately) with self-tapping tips and KTX squaredrive heads.
These stainless steel screws are your best bet for long-term protection against corrosion in decking applications. A 10' x 20' deck with 16" on-center joists requires approximately 700 screws.