…to give the cleanest cuts with a minimum of waste, this Thin Kerf Parting Tool features a 1-1/4" blade width that eliminates the flexing and twisting associated with thin blades. The double-bevel HSS cutting face imparts fine parting lines to turnings. For a solid interface with the handle, the blade…
$34.69
Standard Parting Tool - Used to part the finished project off from the waste material, the parallel sides make for a rigid tool that handles well. The 1/8" -3mm tool reduces the amount of waste, vital if the timber is an expensive, exotic one. It also makes for a fine detailing tool, e.g. beads and…
From $52.49
…premier manufacturer of specialist wood working tools with a heritage dating back over two hundred years. Designed for smaller, more delicate work, this set includes a 1/8" gouge, 1/4" gouge, 1/4" skew chisel, 1/4" round-nose scraper, and 1/16" parting tool. HSS blades are 3-1/2" long. Ash handles are 6…
$178.49
…the cutting face and a tip that always cuts at a shear angle of 45°, this parting tool produces a burnished finish that hardly needs sanding at all. The tapered profile reduces the risk of binding in the cut, and when parting off, the narrow profile eases the work and produces less waste. 1-1/16" blade…
$68.29
…design. The ergonomic handles are made of solid ash, providing you with greater control and a comfortable grip. Includes a 3/8" Spindle Gouge, 1/8" Parting Tool, 1/2" Oval Skew, and a wood storage case to keep everything neat and organized.
$39.99
Ideal for cutting small spindles on a lathe, this 1/4" wide attachment for the RobertSorby Modular Handle will also add decorative beads. Mounts in the handle quicklyand easily. Made from high speed steel for strength and durability.
$16.79
…three interchangeable blades,this modular setquickly transitions from one turning tool to the next. Perfect for pen turning andother small spindle work! It includes a 1/2" gouge, 1/4" skew and 5/32"beading/parting tool to produce beautiful, intricate pieces. For those who alreadyown the handle, each…
$55.19
…across the end of a board or along the blade of a square to perfectly mark its edge on a piece of wood. Doing so saves time when you need to cut a part to length to match something else; e.g., trimming a piece of molding or edge trim to match the width of a cabinet. Ideal for left- or right-handed users…
$6.99
…components, scrapwood, a screwdriver and your imagination, you can create a huge variety of jigs and fixtures. Modular system allows you to interchange parts for anything from simple shooter boards to deluxe crosscut, miter and coping sleds. It's perfect for expensive specialty items like tenoning jigs. Unlike…
From $10.49
…tools are available in three cutting profiles: round, square and diamond-shaped.Diamond Carbide Mini Turning Tool is ideal for use as a parting tool, and for tight profiles.Square Carbide Mini Turning Tool is ideal for flat or convex areas on spindles and pen turnings.Round Carbide Mini Turning Tool…
$189.99
…decorative pieces with this all-in-one Pen Turning Set from Robert Sorby! Includes a 1/16" parting tool, 5/16" roughing gouge, 1/2" spindlemasterDesigned for use on a mini lathe or for work on smaller projectsEach tool has an overall length of 10"
$87.19
…this Robert Sorby Bedan! Used in the same way as the beading and parting tool, the tool has a relieved side bevel that takes the trouble out of turning. Robert Sorby is the world's premier manufacturer of specialist wood working tools with a heritage dating back over two hundred years.
$62.99
Shape and sharpen all your turning tools with this Tormek Woodturner's Accessory Kit (TNT-708)! You get Gouge Jig (SVD-185) for fingernail shaped bowl gouges and spindle gouges, a Tool Rest (SVD-110) for scrapers, hollowing tools, and thin parting tools, a Turning Tool Setter (TTS-100T) with built-in edge…
$324.00
…Woodturner's Accessory Kit includes a Gouge Jig (SVD-185) for fingernail shaped bowl gouges and spindle gouges, a Tool Rest (SVD-110) for scrapers, hollowing tools, and thin parting tools, a Turning Tool Setter (TTS-100T) with built-in edge geometries, a Profiled Leather Honing Wheel (LA-120) for honing and polishing…
$1,125.00
One of the special chisels available as part of the comprehensive collection of Robert Sorby chisels designed for the demanding craftsman, cabinet maker, furniture restorer and house builder. This Robert Sorby Corner Chisel is perfect for cutting accurate, square corners for mortises. With the fine…
$81.99
This mandrel is for the Bookmark Hardware Kits (sold separately). It is machined to the precise diameter of the wooden button that is glued onto the bookmark. Simply use double-stick turner's tape to affix, turn your blank to match the mandrel, and the blank is ready to be glued into place.
$4.99
…and buckling large panels.Clamp attaches to any length 2 x 2's (lumber and wood clamp pads not included).One Clamp per PackageIncludes one set of 2 parts. Two sets shown in photo.See more Info to make wood pieces.
$31.99
Get started carving with this all-inclusive beginner's kit from Walnut Hollow®. This kit includes invaluable tips and techniques for learning how to woodcarve, as well as how to use the three reusable knives. Work through the supplied patterns, and then move on to other designs. Recommended for…
$16.99
…Woodturner's Accessory Kit includes a Gouge Jig (SVD-185) for fingernail shaped bowl gouges and spindle gouges, a Tool Rest (SVD-110) for scrapers, hollowing tools, and thin parting tools, a Turning Tool Setter (TTS-100T) with built-in edge geometries, a Profiled Leather Honing Wheel (LA-120) for honing and polishing…
$1,307.00
Make all your tools last for generations with this tool care kit. Choose from 2 kits or T-9 lubricant sold separately.
From $10.49
This durable aluminum auxiliary track features Bench Dog's innovative Universal T-track, which has a unique stacked-slot design that accepts any accessory with 1/4" T-bolts, 5/16" T-bolts, or 5/16" hex bolts. Perfect for tables, fences, and even jigs. In addition to the Universal T-track, Dual…
From $14.99
Align it, clamp it, and fasten it to get perfect 90 angles every time!You might think clamping a 90 degree joint couldn't get any easier with our patented Clamp-It Assembly Square, but it just did. That's because we're including apair of Universal Fence Clamps in this all-in-one package!The Clamp…
(Reg. $29.99)
Now $24.99
SAVE 16% TODAY!
…lessons from "Exercises in Wood-working", a fascinating book written in 1889. Popular Woodworking Magazine's editor Christopher Schwarz teaches basic tool functions and uses of the chisel, gouge, hammer, jack plane, marking gauge, rip saw, and the cross-cut saw. You'll also enjoy the 1889 "Treatise on…
$26.29
T-Slots allow jigs to be moved to any position needed on the track.Cuts slots to fit standard T-Slot Bolts. Note: This bit does not cut Universal T-Tracks or slotwalls.3/8" Between Cutter & Shank
$29.99
Get even more storage and organization with the Pack Rack Tool Apron! Use it with your Pack Rack or mount it to the wall. Nine large pockets for tools, parts, supplies, etc.Over 24 smaller pockets and slots forchisels, squares, screwdrivers, pens and pencils
(Reg. $31.99)
Now $15.99
SAVE 50% TODAY!
(0 Items)