…. The handles are turned from fine, solid ash, and are ergonomic with molded rubber that enhances your grip and reduces fatigue. The tools are available in three cutting profiles: round, square and diamond-shaped.Diamond Carbide Mini Turning Tool is ideal for use as a parting tool, and for tight profiles…
$189.99
Here's a turning tool that never needs sharpening! Simply rotate the 360 carbide cutter when the old surface wears out.Gives you a smooth finish on most materials16" solid hardwood handle gives you greater control and stability.Ergonomically - correct 16" solid hardwood handle and brass ferruleRazor…
From $65.99
…the cleanest cuts with a minimum of waste, this Thin Kerf Parting Tool features a 1-1/4" blade width that eliminates the flexing and twisting associated with thin blades. The double-bevel HSS cutting face imparts fine parting lines to turnings. For a solid interface with the handle, the blade is seated…
$34.69
Standard Parting Tool - Used to part the finished project off from the waste material, the parallel sides make for a rigid tool that handles well. The 1/8" -3mm tool reduces the amount of waste, vital if the timber is an expensive, exotic one. It also makes for a fine detailing tool, e.g. beads and…
From $52.49
…the cutting face and a tip that always cuts at a shear angle of 45°, this parting tool produces a burnished finish that hardly needs sanding at all. The tapered profile reduces the risk of binding in the cut, and when parting off, the narrow profile eases the work and produces less waste. 1-1/16" blade…
$68.29
…and three interchangeable blades,this modular setquickly transitions from one turning tool to the next. Perfect for pen turning andother small spindle work! It includes a 1/2" gouge, 1/4" skew and 5/32"beading/parting tool to produce beautiful, intricate pieces. For those who alreadyown the handle, each…
$55.19
…They are also easily resharpened, make turning easier, and they give you better control over your design. The ergonomic handles are made of solid ash, providing you with greater control and a comfortable grip. Includes a 3/8" Spindle Gouge, 1/8" Parting Tool, 1/2" Oval Skew, and a wood storage case…
$39.99
Ideal for cutting small spindles on a lathe, this 1/4" wide attachment for the RobertSorby Modular Handle will also add decorative beads. Mounts in the handle quicklyand easily. Made from high speed steel for strength and durability.
$16.79
…bobbins, or other small decorative pieces with this all-in-one Pen Turning Set from Robert Sorby! Includes a 1/16" parting tool, 5/16" roughing gouge, 1/2" spindlemasterDesigned for use on a mini lathe or for work on smaller projectsEach tool has an overall length of 10"
$87.19
…premier manufacturer of specialist wood working tools with a heritage dating back over two hundred years. Designed for smaller, more delicate work, this set includes a 1/8" gouge, 1/4" gouge, 1/4" skew chisel, 1/4" round-nose scraper, and 1/16" parting tool. HSS blades are 3-1/2" long. Ash handles are 6…
$178.49
…this Robert Sorby Bedan! Used in the same way as the beading and parting tool, the tool has a relieved side bevel that takes the trouble out of turning. Robert Sorby is the world's premier manufacturer of specialist wood working tools with a heritage dating back over two hundred years.
$62.99
…Woodturner's Accessory Kit includes a Gouge Jig (SVD-185) for fingernail shaped bowl gouges and spindle gouges, a Tool Rest (SVD-110) for scrapers, hollowing tools, and thin parting tools, a Turning Tool Setter (TTS-100T) with built-in edge geometries, a Profiled Leather Honing Wheel (LA-120) for honing and polishing…
$1,125.00
Use the Multi-Jig SVS-50 Sharpening System Jig with your Tormek T-7 or T-3 to sharpen turning skew chisels, straight or radiused edge parting and beading tools and roughing gouges. Straight carving gouges up to 2" width.
$66.00
Shape and sharpen all your turning tools with this Tormek Woodturner's Accessory Kit (TNT-708)! You get Gouge Jig (SVD-185) for fingernail shaped bowl gouges and spindle gouges, a Tool Rest (SVD-110) for scrapers, hollowing tools, and thin parting tools, a Turning Tool Setter (TTS-100T) with built-in…
$324.00
…Woodturner's Accessory Kit includes a Gouge Jig (SVD-185) for fingernail shaped bowl gouges and spindle gouges, a Tool Rest (SVD-110) for scrapers, hollowing tools, and thin parting tools, a Turning Tool Setter (TTS-100T) with built-in edge geometries, a Profiled Leather Honing Wheel (LA-120) for honing and polishing…
$1,307.00
…separately). It is machined to the precise diameter of the wooden button that is glued onto the bookmark. Simply use double-stick turner's tape to affix, turn your blank to match the mandrel, and the blank is ready to be glued into place.
$4.99
This is the essential tool for pen turning on a lathe! Machined-accurate steel bar is held in the lathe to ensure the pen turns accurately with live center, no drill chuck required! This Pen Turning Mandrel system includes a #1 morse taper arbor for use with a #1 morse taper lathe, 7 mm mandrel shaft…
(Reg. $15.99)
Now $12.99
SAVE 18% TODAY!
…centered hole the entire length of the pen. Later, it smoothly presses your parts together without any bowing or misalignment. Notched jaws automatically center the blank for drilling, while two countersunk holes center the parts during assembly. Large clamping wheel provides slow, controlled pressure so…
$99.99
Piece together this five-part, laser-cut pen barrel and turn it to size for stunning results. The kit includes a natural curly maple barrel and cocobolo notes that get inlaid into position to become a seamless part of the finished pen. Designed for Manhattan Chrome, Manhattan Gold, and Elegant Manhattan…
$19.99
…-head screws provide a no-slip interface. The Pen/Pencil Combo Mill is a value-priced package with a threaded shank, meaning you have the option of turning your own handle for a hand mill. Combo components are interchangeable with other sizes. Barrel Trimmers and Combo include hex wrenches.
From $13.99
Carter's MultiRest provides three strong, helping hands for the most challenging of turnings: big bowls, long vessels, and narrow spindles. Slide the support wheels up against your turning project and flip on the lathe to enjoy unequaled stability and whisper-quiet operation. Each ball-bearing roller…
$359.95
Prepare your pen blanks properly! The trimmer trims the ends of the blank to the exact size of the brass tube and also leaves a flat edge on the blank for a flush meeting with bushings. Pilot shafts clear out any glue that may be left in the brass tube. Your pen assembly will be much easier!
(Reg. $29.99)
Now $24.99
SAVE 16% TODAY!
…(makes about 10-15 pens), hardener, gloves, measuring cup, casting mold, tube stoppers and stir sticks plus casting and decorating instructions. Pen parts not included.
$58.79
Piece together this nine-part, laser-cut pen barrel and turn it to size for stunningresults. The kit includes a solid blackwood barrel and eight detailed fish inserts thatget inlaid into position to become a seamless part of the finished pen. Designed for Manhattan Chrome, Manhattan Gold, and Elegant…
$24.19
Piece together this five-part, laser-cut pen barrel and turn it to size for stunning results. The kit is composed of natural curly maple, black-dyed spalted maple and cocobolo pieces that get inlaid into position to become a seamless part of the finished pen. Designed for Manhattan Chrome, Manhattan…
$19.99
(0 Items)