…veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needeed with this blade! The Perma…
From $68.97
…technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in…
From $54.97
…cuts from 3/16" to 13/16" with the easy-to-use Oldam 7" Adjustable Dado Blade! Fits most full-size 8", 9", and 10" table saws with a 5/8" arbor and has 16 precision-sharpened carbide tips that cut through hardwood, softwood, plywood, wood composites, and melamine with ease. And Oldham's adjustable hub…
(Reg. $39.99)
Now $14.99
SAVE 62% TODAY!
…veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needed with this blade! The Silver…
$94.97
Freud Industrial Series Teflon-coated saw blade. Produces exceptionally clean cuts in veneered plywood and melamine.
From $94.47
You'll get faster feed rates plus absolute splinter control- even on Oak/Birch ply veneers and melamine! Gives you refined cuts every time.
$175.99
…veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needed with this blade! The Perma…
From $90.47
Cut virtually chip-free through veneered plywood, melamine, and laminates with this 7-1/4" blade! Features Freud's TiCo Hi-Density Carbide and Titanium craftsmanship for long life and a flawless finish with every cut.7-1/4" blade with 5/8" arbor
$54.97
This blade is ideal for sizing sheet goods (chipboard, plywood, laminates, MDF) where speed is more important than a smooth finish or when cutting stacks of material. These blades are best used when cutting plywood and composition material, but they can also be used with hardwood and softwood. The Silver…
From $61.97
…technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in…
$52.47
…blade does it all. Whether you're ripping or crosscutting, a Premier Fusion blade will tackle any project.The Perma-SHIELD coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD blades resist binding in large volume cutting, reducing subsequent blade…
$99.97
…rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots, practically…
From $71.47
…veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needeed with this blade! Freud…
$65.97
…rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots, practically…
From $61.97
This heavy-duty blade is designed primarily for heavy use in a cabinetmaker's shop. Combining a 10 hook angle and the alternate top bevel tooth grind, this blade provides a good crosscut and long cutting life in hardwood, softwood, plywood, and chipboard. The LU73M series is ideal for cutting a wide…
From $62.97
…blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Fine Tooth Cross-Cut Saw blade for the TS 75 Plunge Cut Saw is an excellent blade for smooth cross-cutting in veneered plywood, sheet goods, melamine, and hard and soft woods. This blade…
$115.00
Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The Fine Tooth saw blade for the Kapex Miter Saw was designed for smooth cross-cutting in veneered plywood, sheet goods, melamine, and hard and soft woods. The Fine Tooth blade incorporates…
$140.00
….High Performance "Skip Tooth/Reverse " PGT- Cuts through plywood and softwoods with minimal burning or underside tear out. Razor sharp teeth cut faster with greater accuracy on both straight and radius cuts. Consistently smooth, sand free. 6 blades per pack.Crown Tooth- Excellent for cutting plastics, acrylics…
From $5.29
…softwood, hardwood, melamine, veneered plywood, chipboard, soft plastics, ABS, HDPE and similar materials. The cross-set teeth design is ideal for fast cuts. For delicate and fine scroll cuts the S 50/1.4 K blade (486564) is recommended instead. Festool jigsaw blades are engineered for cutting efficiency…
From $10.00
…Choose this blade for excellent cutting results in softwoods, hardwoods, melamine, veneered plywood, chipboard, laminated boards, and similar materials. The cross-set teeth guarantee very fast cuts. Bimetal blade stay sharper and last longer than regular blades. Festool jigsaw blades are engineered…
$18.00
The HS75/2.5 bi jigsaw blade is a bi-metal blade for for fine cuts in a lot of different materials. This is the right blade if long service life and high cutting capacity are important. Very good results can be achieved in softwood, hardwood, melamine, veneered plywood, chipboard, soft plastics, ABS…
$18.00
…everything from veneered plywoods and laminates to solid wood, chip and splinter-free with a super smooth, flat bottom. The SD500 Series dado sets were the first to include a 3/32" thick chipper and has the flexibility of an adjustable dado to handle today's undersized plywood. This allows the cut width…
From $183.47
This fast-cutting blade is ideal for a perfect finish on one side of laminates and melamines. The Perma-SHIELD® coating makes these blades resistant to friction and heat build-up. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. The 10 hook angle and a triple chip…
From $85.97
…is an excellent blade for fast and clean cuts in softwoods, hardwoods, melamine, veneered plywood, and chipboard. The cross-set teeth are perfect for both fast and clean cuts. Works well as general purpose blade with a strong performance and very good value. Festool jigsaw blades are engineered for…
From $10.00
The S 50/1.4 K jigsaw blade is an excellent blade for scroll-cutting and making tight curves in a wide range of materials. Achieve very good results in softwood, hardwood, melamine, veneered plywood, chipboard, soft plastics, ABS, HDPE, hard plastics, Plexiglas, acrylics and similar materials. The conical…
$10.00
(0 Items)