Specially designed to cut grooves and dadoes for plywood that measures less than its stated nominal thickness.Two flutes, 1/4" or 1/2" shanks.
From $13.99
These bits are specially designed to cut grooves and dadoes to accept plywood that measures less than its stated nominal thickness. This set includes the three most common sizes of straight bits for undersized plywood: 23/32" for 3/4" plywood, 31/64" for 1/2" plywood, and 15/64" for 1/4" plywood.
$44.99
…undersized plywood; ideal for 1/4" to 3/4" plywood.Set comes in Freud's unique shadow box case that can hang on the wall or mount on the bench to keep bits handy and safe.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted portable routers.
$79.97
…saving set-up improves accuracy and increases profitability for the professional. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
$186.97
With only a 1/2" straight bit and this handy, smooth-sliding Dado Jig, you can cut perfect tight-fitting dadoes to accept any stock from about 1/2" to 1" thick.Since it's infinitely adjustable within that range, it's perfect for plywood that is thinner than the nominal thickness, and for lumber that's…
$44.99
…projects such as circular planters and canoes. Bit 99-017 cuts the flute and 99-018 cuts the mating bead. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as table-mounted portable routers.
From $49.97
…solid carbide up spiral bits combine effective chip removal with a cut that can't be matched by standard straight bits. Ideal for production settings.Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.Use on CNC and other automatic routers as well as hand-held…
From $51.47
…bits because of the precise shear and hook angles.End of bit relief allows for fast plunging.Cuts all composite materials, plywoods, hardwoods, and softwoods.Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.(Click "More Info" above for specific router bit…
From $18.47
…-sided veneers or laminated materials for a fine finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
From $81.97
…precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with thick panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield® coating lengthen bit life and…
$269.47
Porter-Cable 2880069 - 3/8" Panel Pilot Router Bit, 1/4" ShankWood, plywood, aluminum sheeting, insulation, drywallTurned from solid steelMicrograin carbide tippedFully guaranteed
(Reg. $13.99)
Now $6.99
SAVE 50% TODAY!
…thinner panels for projects such as humidors and jewelry boxes. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers, as well as table-mounted portable routers.
$108.97
…-1/2 degree chamfer bits for 8-sided constructions, and 30 degree bits for 6-sided constructions. Chamfer size easily adjusts by changing the height of the bit. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.
$36.97
…Freud® quality router bit! Ideal for hinges, mortises, and dadoes. Great for undersized plywood.1/2" Shank7/32" overall diameter1/2" carbide height2-1/4" overall lengthDeep center gullet deliver maximum material removal without chip loadingCuts all composition materials, plywoods, hardwoods, and softwoodsUse…
(Reg. $29.97)
Now $19.99
SAVE 33% TODAY!
…on both surfaces of the rabbet. Steel pilots can be removed from bits and used with edge guides for wider rabbets. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.Rockler numbers 31421, 33592 include multiple bearings for a variety…
From $57.47
…flat panel doors and mill tenons of any length with these quarter round bits. Works for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with thick panels. Remove the top portion of the cutter…
$127.47
…and dovetailing. All bits have 1/2" shanks.Set comes in Freud's unique shadow box case that can hang on the wall or mount on the bench to keep bits handy and safe.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted portable routers.
$220.47
…dadoes. Freud's Mortising Bits are designed with deep center gullets for maximum material removal without chip loading.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.
From $18.47
Application: Creates rail and stile doors matched reverse profiles Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.Freud 99-061 bit, cope and stick cut the rails and stiles, and can be used alone to form a matching edge profile.
$53.97
…precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with thick panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield® coating lengthen bit life and…
$127.47
…Simply adjust the height of your cut to change the entire profile. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers and table-mounted portable routers.
$68.97
…beams, posts, railings, and millwork. Ideal for accenting square table legs. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.
$47.97
…precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with thick panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield® coating lengthen bit life and…
$183.47
…cutting capacity for thick stock or for routing multiple parts with a template. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on portable or table-mounted routers for template work.
From $32.97
…spacers that allow you to produce V paneling from 1/2", 3/4", or 1" thick stock. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
$177.47
(0 Items)