…technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts…
From $54.97
This fast-cutting blade is ideal for a perfect finish on one side of laminates and melamines. The Perma-SHIELD® coating makes these blades resistant to friction and heat build-up. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. The 10 hook angle and a triple chip…
From $85.97
Thicker than any other jigsaw blade, the Festool TRION is the standard by which other blades are measured. When combined with the Festool jigsaw, the S 75/4 FS TRION is capable of making perpendicular cuts in hard to cut materials up to 2 1/8 inches thick with speed and ease. The cross-set tooth design…
$38.00
…technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts…
$52.47
Cut virtually chip-free through veneered plywood, melamine, and laminates with this 7-1/4" blade! Features Freud's TiCo Hi-Density Carbide and Titanium craftsmanship for long life and a flawless finish with every cut.7-1/4" blade with 5/8" arbor
$54.97
…No scoring blades needeed with this blade! Freud has customized their LU96R blade especially for track saws, giving this blade extra negative hook angle. The -5 hook angle allows for a smooth, easy cut with a handheld saw. At 160mm in diameter, this blade will fit the Festool TS-55 saw family, the DeWalt…
$65.97
Freud Industrial Series Teflon-coated saw blade. Produces exceptionally clean cuts in veneered plywood and melamine.
From $94.47
…veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needed with this blade! The Silver…
$94.97
Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Fine Tooth Cross-Cut Saw blade for the TS 75 Plunge Cut Saw is an excellent blade for smooth cross-cutting in veneered plywood, sheet goods, melamine, and hard and soft woods…
$115.00
This blade is ideal for sizing sheet goods (chipboard, plywood, laminates, MDF) where speed is more important than a smooth finish or when cutting stacks of material. These blades are best used when cutting plywood and composition material, but they can also be used with hardwood and softwood. The Silver…
From $61.97
…veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needed with this blade! The Perma…
From $90.47
Cut precision dadoes in everything from plywood to melamine with the Avenger 8" x 42 Tooth Stack Dado Set! Gives you a chip-free finish and a true flat-bottomed groove. Set includes two 8" diam. x 42 tooth outside blades with 5/8" arbors, five chippers and an 8-pc. shim set for custom dado thicknesses…
(Reg. $89.99)
Now $69.99
SAVE 22% TODAY!
Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The Fine Tooth saw blade for the Kapex Miter Saw was designed for smooth cross-cutting in veneered plywood, sheet goods, melamine, and hard and soft woods. The Fine Tooth blade incorporates…
$140.00
…for effective chip clearance. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this combination blade, there is no need for stabilizers. The Perma-SHIELD coating covers the blade plate and cutting edge in a protective…
From $49.97
…coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.
From $69.47
…coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.
From $62.97
You'll get faster feed rates plus absolute splinter control- even on Oak/Birch ply veneers and melamine! Gives you refined cuts every time.
$175.99
…cuts from 3/16" to 13/16" with the easy-to-use Oldam 7" Adjustable Dado Blade! Fits most full-size 8", 9", and 10" table saws with a 5/8" arbor and has 16 precision-sharpened carbide tips that cut through hardwood, softwood, plywood, wood composites, and melamine with ease. And Oldham's adjustable hub…
(Reg. $39.99)
Now $14.99
SAVE 62% TODAY!
The HS75/2.5 bi jigsaw blade is a bi-metal blade for for fine cuts in a lot of different materials. This is the right blade if long service life and high cutting capacity are important. Very good results can be achieved in softwood, hardwood, melamine, veneered plywood, chipboard, soft plastics, ABS…
$18.00
….High Performance "Skip Tooth/Reverse " PGT- Cuts through plywood and softwoods with minimal burning or underside tear out. Razor sharp teeth cut faster with greater accuracy on both straight and radius cuts. Consistently smooth, sand free. 6 blades per pack.Crown Tooth- Excellent for cutting plastics, acrylics…
From $5.29
…softwood, hardwood, melamine, veneered plywood, chipboard, soft plastics, ABS, HDPE and similar materials. The cross-set teeth design is ideal for fast cuts. For delicate and fine scroll cuts the S 50/1.4 K blade (486564) is recommended instead. Festool jigsaw blades are engineered for cutting efficiency…
From $10.00
…blade does it all. Whether you're ripping or crosscutting, a Premier Fusion blade will tackle any project.The Perma-SHIELD coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD blades resist binding in large volume cutting, reducing subsequent blade…
$99.97
Protect your tools and equipment with Bostik DriCote. Expect cleaner cuts and longer blade life. Spray on blades for smoother cuts in solid wood, plywood, and laminates. 10-3/4 ounce aerosol.
$20.99
Make perfect flat-bottom cuts! Affordable saw blade and dado set features full-size chippers for easier setup and less chance of wobble or vibration. With C-4 industrial quality carbide tips. Ideal for all types of dimensioned lumber, plywood, soft wood, hard wood, artificial and processed woods, and…
$104.99
…everything from veneered plywoods and laminates to solid wood, chip and splinter-free with a super smooth, flat bottom. The SD500 Series dado sets were the first to include a 3/32" thick chipper and has the flexibility of an adjustable dado to handle today's undersized plywood. This allows the cut width…
From $183.47
(0 Items)