The long distance runner!Thin kerf and #400 grit diamond ground teeth for fast, clean cuts.
$29.99
Using advanced technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates…
From $54.97
…coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.
From $62.97
Specially designed blades for chop saws, sliding compound miter saws, and radial arm saws.
From $114.99
…superior blade gives glass-smooth finishes when crosscutting hard and soft woods, so no sanding is required. What makes this blade so special is the unique side grinding of each tooth. The teeth actually polish the material as it cuts. New laser-cut anti-vibration that resonates in standard blades, producing…
From $71.47
This thin kerf blade produces glass smooth surfaces when crosscutting hardwoods and softwoods, thanks to Freud's unique side grinding technology. The larger blades are ideal for miter box applications. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower…
From $57.47
…Perma-SHIELD® coated blade gives new life to underpowered saws and produces smooth crosscuts in hardwoods, softwoods and moldings. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. Thin kerf blades remove less material than standard carbide blades, thus requiring less…
From $49.47
…blade, there is no need for stabilizers. The Silver I.C.E. (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw…
From $61.97
…one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features…
From $71.47
A top-quality thin kerf general purpose blade that's perfect for general purpose cutting on non-sliding miter saws and table saws under 3HP. Thin kerf saves wood loss on each cut and reduces power drain on your saw. This blade will give you scratch free and polished cuts on stock up to 2" thick.
$131.99
For fine, chip-free crosscuts with minimal saw marks, turn to the Irwin Marples 60T Fine Crosscutting Saw Blade. Whether mounted on a miter saw or in a table saw, the razor-sharp carbide teeth and ATB+R grind will produce excellent cuts in hard and soft woods. The unique raker tooth design allows for…
$54.99
…outside blades with three two wing chippers. This makes it ideal for underpowered saws because it requires less power to feed. Freud's stacked dado set allows you to obtain a perfect fit on shelving, joints, tongue and groove, and more. May be used with most 10" table and radial arm saws. This resharpenable…
From $86.47
…coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.
From $68.47
…for effective chip clearance. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this combination blade, there is no need for stabilizers. The Perma-SHIELD coating covers the blade plate and cutting edge in a protective…
From $49.97
…increments and doubles the number of slot widths available. A shim set is also included with the dado set for fine adjustments. Use on all table saws, and radial arm saws for cutting slots, grooves, dadoes, and rabbets in softwood or hardwood. SD506 is 6" in diameter, and SD508 is 8" in diameter. Both include…
From $183.47
…cut. One blade does it all. Whether you're ripping or crosscutting, a Premier Fusion blade will tackle any project. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.The Perma-SHIELD coating covers the blade plate and cutting…
$79.97
This thin kerf table saw blade produces smooth as sanded rips and crosscuts in hardwoods up to 2" thick. For another option in the Forrest Woodworker II series, check out the ATB General Purpose Blade.
$114.99
…kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5 negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades, thus requiring less…
From $63.97
…finish. No scoring blades needed with this blade! The Perma-SHIELD coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin…
From $90.47
…blade does it all. Whether you're ripping or crosscutting, a Premier Fusion blade will tackle any project.The Perma-SHIELD coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD blades resist binding in large volume cutting, reducing subsequent blade…
$99.97
With a unique triple chip tooth design, this 10" blade leaves extremely smooth, true surfaces for glue and finish work. Ideal for ripping hard and soft woods 1/8" to 1" thick.
$59.97
This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut. These blades are precision balanced and can be used in gang-rip operations. The ideal working range is from 3/4" to 2-3…
From $57.47
…Perma-SHIELD blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade. The LU86R blade is also available for Festool, DeWalt, and Makita track saws.
From $40.97
The DELTA RS830 includes stand, 1-1/2 HP, 120/240 Volts motor, automatic blade brake, 10" saw blade, blade wrenches, instruction manualCast-iron track, column and column support for rigidity and continued accuracy.Depth-of-cut control handle and locking levers are positioned above the table for easy…
$1,649.99
…and a true flat-bottomed groove. Set includes two 8" diam. x 42 tooth outside blades with 5/8" arbors, five chippers and an 8-pc. shim set for custom dado thicknesses. May be used with most 10" table and radial arm saws. Comes in a convenient carrying case.
$89.99
(0 Items)