…using plywood and also allow use with thick panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield® coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks. Also includes a 3-1/2" dia. Ogee Raised Panel Bit.
$183.47
…both straight and arched top door panels! Cuts both the profile on the front of the panel and the rabbet in the back of the panel in one pass, giving you a perfect panel edge thickness every time and a 1/4" tongue for precise fitting rails and stiles. Rockler router bits are manufactured using the finest…
$137.79
…using plywood and also allow use with thick panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield® coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks. Also includes a 3-1/2" dia. Cove Raised Panel Bit.
$183.47
….Patented design allows these bits to produce a full 1-1/2" wide reveal for traditional raised panel doors.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on table-mounted portable routers.
$119.97
…possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Application: Ideal for creating raised panels for doors and paneling, as well as decorative tops, plaques and moldingRevolutionary Quadra-Cutdesign combines two small wings that cut downward to shear the…
From $98.97
…using plywood and also allow use with thick panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield® coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks. Also includes a 3-1/2" dia. Bevel Raised Panel Bit.
$183.47
Use these space balls to center raised panels in their frames thereby ensuring flawless frame and panel assemblies. Perfectly centers and tightly secures solid center panels in the frame. Insert space balls in your rail and stile grooves to prevent panel rattle. 8-10 space balls per door recommended…
$6.49
…using plywood and also allow use with thick panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield® coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks. Also includes a 3-1/2" dia. Cove Raised Panel Bit.
$183.47
…Patented design allows these bits to produce a full 1-1/2" wide reveal for traditional raised panel doors. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
$119.97
Pro-quality set features 1/2" shank router bits with carbide cutters. Make genuine Shaker Raised Panel, Rail and Stile Doors. Use with stock up to 3/4" thick. Ideal for drawer fronts to complement raised panel doors.
$209.99
…height. This allows making adjustments to within .001" in the spindle height, which is critical when aligning rail and stile cutters for those raised panel doors.Integrated caster system built into the cast iron base for instant shop mobilitySpindle height digital readout for making fine incremental…
$3,879.99
…using plywood and also allow use with thick panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield® coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks. Also includes a 2-3/4" dia. Ogee Raised Panel Bit.
$183.47
Horizontal and Vertical raised panel bits manufactured to Rockler's exacting standards. Use vertical bits for straight panels; horizontal bits cut both straight and curved panels.
From $54.99
Keep your supply of router bits organized and easily accessible! This galvanized steelrack features keyhole slots 16" on center to allow easy mounting to wall studs or theside of your router table stand. Holds 27 1/2" shank bits and 13 1/4" shank bits. 18" long.
$15.99
…out of an existing or new router and router table! Along with shop-tested advice, this book includes complete plans for four complete router tables and routing work stations, a router lift, plus several more auxiliary fences for special operations such as raising panels and jointing edges. Also includes…
$19.95
…using plywood and also allow use with thick panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield® coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks. Also includes a 3-1/2" dia. Cove Raised Panel Bit with back cutter.
$195.97
…using plywood and also allow use with thick panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield® coating lengthen bit life and protect against heat and pitch build-up. 1/2" shanks. Also includes a 3-1/2" dia. Ogee Raised Panel Bit with back cutter.
$201.97
Everything you need to make raised panel doors in a handy wooden case. Set includes bead edge stile and rail router bits and ogee profile vertical raised panel bit.
$149.99
The ultimate panel cutting accessory! Developed by acclaimed woodworker Lonnie Bird, Panel-Loc is a combination hand guard and panel hold-down that provides safer and better cuts when routing raised panels. Orange push blocks not included.
$52.99
…drilling and more. Allows featherboard to apply pressure at the table level and at the top of the router table fence 3" above the table. Ideal when routing workpiece on edge or when using vertical panel raising bits.
$32.99
Horizontal and Vertical raised panel bits manufactured to Rockler's exacting standards. Use vertical bits for straight panels; horizontal bits cut both straight and curved panels.
From $54.99
Available in Horizontal and Vertical. Both have a 1/2" shank. Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
From $54.99
…possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Application: Ideal for creating raised panels for doors and paneling, as well as decorative tops, plaques and moldingRevolutionary Quadra-Cutdesign combines two small wings that cut downward to shear the…
From $104.47
(0 Items)
