With a unique triple chip tooth design, this 10" blade leaves extremely smooth, true surfaces for glue and finish work. Ideal for ripping hard and soft woods 1/8" to 1" thick.
$59.97
This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD® coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to 2-3/4" thick…
From $38.47
…Freud blades includes a 24T General Purpose Blade for ripping and dimensioning, and an 80T Ultra-Fine Crosscut Blade for the fine finishing cuts on intricate molding and joinery. Both blades feature thin-kerf technology, which is less taxing on your saw, and generates less waste. Laser-cut bodies with expansion…
(Reg. $119.99)
Now $79.99
SAVE 33% TODAY!
…quickly and accurately with this Japanese Takuma 240mm Ryoba Saw! Makes a great saw for cutting in tight places and still gives you straight and true cuts. The included two-sided blade is made of high-quality tempered steel. The 8" ripping side features 8 Teeth Per Inch (TPI) while the 9" crosscut side…
From $26.79
Comes with an interchangeable blade for crosscut, ripping and dovetails. Both blades are 7-1/2" long. Overall length is 16" long.
$54.99
…accurate ripping and shaping when used with the Power Tool Guide Kit (sold separately, sku: 42173) and the Straight Edge System (sold separately, sku: 36495)!12" x 12" x 1/4" thick acrylic Keeps your router or circular tracked to the Straight Edge System Dedicate one base for each router or circular saw you…
$16.99
This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut. These blades are precision balanced and can be used in gang-rip operations. The ideal working range is from 3/4" to 2-3…
From $57.47
…this Japanese model handles crosscuts, rips and diagonal cuts in a wide variety of hard and soft woods. With 15 impulse-hardened teeth per inch, a 10-3/8" long cutting surface, and a kerf width of only 0.92mm, it makes quick, smooth work out of many hand-sawing jobs.
$36.99
…saw, you'll love the Kreg Rip-Cut Saw Guide. There's no need to juggle guide rails, a pencil or tape measure. In fact, there's no measuring or marking required-just slide the fence on the Rip-Cut to any setting from 1/8" to 24" and rip a clean, straight line right down the length of the sheet. The Rip-…
(Reg. $34.99)
Now $29.99
SAVE 14% TODAY!
Ensure accurate ripping and shaping when used with your shop made sled or the 12" x 12" Acrylic Base (sold separately, sku: 42279) and the Rockler Straight Edge System (sold separately: sku: 36495)! Keeps your router or circular tracked to the Rockler Straight Edge System Dedicate one sled for each router…
$6.99
Whether it's face frames, long runs or full production, the SLR12 Straight Line Rip Saw has every job covered. Powered by a 15HP main motor, this saw has the capacity for virtually any job. The 12" main blade mounts on a high alloy, heat treated arbor that is precision ground and dynamically balanced…
$16,599.99
This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut. These blades are precision balanced and can be used in gang-rip operations. The ideal working range is from 3/4" to 2-3…
From $51.47
This blade is ideal for high-speed ripping operations in hardwood and softwood. The low tooth count also makes this blade ideal for ripping thick material. It can be used with manual feeding as well as with power feeders in single or gang-ripping operations. The ideal working range is 1-1/2" to 3-1/2…
From $64.97
…This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate ripping blade, there is no need for stabilizers.The Perma-SHIELD coating covers the blade plate and cutting edge in a protective layer, reducing heat build…
From $69.97
…This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate ripping blade, there is no need for stabilizers. The Silver I.C.E. (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than…
$62.97
In many woodworking shops, one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance…
From $61.97
In many woodworking shops, one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance…
From $71.47
…multi-purpose blade will cut stacks of manmade wood products as well as hardwood and softwood up to 2-3/4" thick. The blade's deep gullets and TCG rip and crosscut through hardwoods and softwoods with ease. Although the ideal working range is 1/2" to 2-3/4" thick, thinner or thicker materials may be…
From $68.47
This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD® coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to 2-3/4" thick…
$32.97
This jig allows you to rip thin strips on the left side of the blade, eliminating the danger of pushing narrow strips between the saw and fence. Since the strip is not trapped between the blade and fence, there is also less risk of binding and kickback. It's simple to use; a single knob locks the jig…
(Reg. $26.99)
Now $19.99
SAVE 25% TODAY!
Cutting large panels on your Panel Pro 2 Panel Saw is easier than ever when you add a pair of Lower Extensions! These extensions add 20" to each side of your saw, giving you the option to effortlessly crosscut or rip even larger panels. Includes mounting screws for quick, easy installation.
$99.00
With a riving knife and 80 of solid cast iron work surface, this saw will see you through all your projects. The weight of this machine ensures stability for smooth cutting operation. The JTAS-12-DX also features a maximum rip of 14 left of the blade, giving you more capacity. Dust collection is improved…
10" Compact Job Site Table Saw w/ Site Pro Modular Guarding System and Rolling Stand3 Year Limited WarrantyTelescoping fence delivers 24-1/2" rip capacityRack and pinion design makes fence adjustments fast, smooth and accurate15.0 Amp high-torque motor with the power to cut pressure-treated lumber and…
$629.00
Heavy-Duty 10" Job Site Table Saw with Site-Pro Modular Guarding System3 Year Limited WarrantyTelescoping fence delivers 24-1/2" rip capacityRack and pinion design makes fence adjustments fast, smooth and accurate15.0 Amp high-torque motor with the power to cut pressure-treated lumber and hardwoodsHeavy…
$499.00
…Guide enables guided, parallel cutting with the TS 75 Plunge Cut Saw. Can be used for parallel rip cutting with the TS saw, independent of the FS guide rails. Attaches to both sides of the saw for short side or broad side cuts. Rip capacity from the blade side up to 11 13/16in (300mm), and on the motor…
$60.00
(0 Items)