…cut. One blade does it all. Whether you're ripping or crosscutting, a Premier Fusion blade will tackle any project. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.The Perma-SHIELD coating covers the blade plate and cutting…
$79.97
This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD® coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to 2-3/4" thick…
$32.97
This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut. These blades are precision balanced and can be used in gang-rip operations. The ideal working range is from 3/4" to 2…
From $57.47
With a unique triple chip tooth design, this 10" blade leaves extremely smooth, true surfaces for glue and finish work. Ideal for ripping hard and soft woods 1/8" to 1" thick.
$59.97
This thin kerf table saw blade produces smooth as sanded rips and crosscuts in hardwoods up to 2" thick. For another option in the Forrest Woodworker II series, check out the ATB General Purpose Blade.
$114.99
This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD® coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to 2-3/4" thick…
From $38.47
…range is from 1/8" to 1" thick. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate ripping blade, there is no need for stabilizers.The Perma-SHIELD coating covers the blade plate and cutting edge in a protective…
From $69.97
…efficient chip ejection during rip cuts, while maintaining excellent finish quality on crosscuts. The blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all table saws, from lower-powered portable machines to high-end cabinet saws.
$44.99
…flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this combination blade, there is no…
From $49.97
…angle and an ATB grind for fast, clean rip cuts. The Irwin Marples 10" 24T Saw Blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all table saws, from lower-powered portable machines to high-end cabinet saws.
$34.99
Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Panther Ripping blade for the TS 75 Plunge Cut Saw is an excellent fast-cutting rip blade with an aggressive hook angle and deep gullets for use with both hard and soft…
$70.00
…Rips and crosscuts hardwoods up to 2" thick. Ply-veneers of oak and birch will crosscut with no bottom splinter at moderate feed rates. Ends second-step finishing (jointing and sanding not required).For another option in the Forrest Woodworker II series, check out the Thin Kerf General Purpose Blade.
$120.79
This jig allows you to rip thin strips on the left side of the blade, eliminating the danger of pushing narrow strips between the saw and fence. Since the strip is not trapped between the blade and fence, there is also less risk of binding and kickback. It's simple to use; a single knob locks the jig…
(Reg. $26.99)
Now $19.99
SAVE 25% TODAY!
…saw, and fully hardened plates keep the blades running truer, longer. Features specially engineered heat vents to reduce heat and resin buildup. Precision tensioned and balanced for optimum accuracy. Unique reinforced shoulders adds stability and durability. Irwin Marathon 10" x 24T Framing/Ripping Blade…
$52.49
…for ripping. Thinner or thicker material may be cut, but some loss of surface finish may occur.Freud has customized their LU86R blade especially for track saws, giving this blade extra hook angle. The 12 hook angle allows for a smooth, easy cut with a handheld saw. At 160mm in diameter, this blade will…
$41.97
…Compact Job Site Table Saw with Site-Pro Modular Guarding System3 Year Limited Warranty15 Amp motor quickly rips through hardwoods with easeRack & Pinion fence design delivers consistent fence to blade parallelismTelescoping rails retract to create a small, portable package16" of rip easily cuts a variety…
$369.00
…one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features…
From $71.47
This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut. These blades are precision balanced and can be used in gang-rip operations. The ideal working range is from 3/4" to 2…
From $51.47
…coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.
From $64.97
…one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features…
From $61.97
This multi-purpose blade will cut stacks of manmade wood products as well as hardwood and softwood up to 2-3/4" thick. The blade's deep gullets and TCG rip and crosscut through hardwoods and softwoods with ease. Although the ideal working range is 1/2" to 2-3/4" thick, thinner or thicker materials may…
From $68.47
…after the cut. The ideal working range is from 1/8" to 1" thick. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate ripping blade, there is no need for stabilizers. The Silver I.C.E. (Industrial Cooling…
$62.97
…coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.
From $54.97
…for ripping. Thinner or thicker material may be cut, but some loss of surface finish may occur.The Perma-SHIELD coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD blades resist binding in large volume cutting, reducing subsequent blade warp.…
From $40.97
…last!This twin pack of Freud blades includes a 24T General Purpose Blade for ripping and dimensioning, and an 80T Ultra-Fine Crosscut Blade for the fine finishing cuts on intricate molding and joinery. Both blades feature thin-kerf technology, which is less taxing on your saw, and generates less waste.…
(Reg. $119.99)
Now $79.99
SAVE 33% TODAY!
|
Need Help? |
(0 Items)