Top quality straight router bits that meet the high standards of Rockler Woodworking and Hardware. One of the most common router bits, straight router bits are used to cut grooves, dadoes, rabbets, and for general purpose material removal.
From $13.49
Stile and rail bits for beautifully crafted frames. Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
$99.99
These carbide-tipped bits let you create classic wooden toy train tracks, similar to the expensive store-bought track.Double groove bit cuts both track grooves in a single pass.Use single groove bit for curved track sections.1/2" shanks.White Birch, Maple or European Beech stock recommended.Click here…
From $19.99
…same diameter as the blade, making this the perfect choice for template work when the template is above the worked material (if using a hand-held router in the conventional way). Available in three sizes. Click "More Info" Tab for specific dimensions.
From $17.99
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
From $17.99
Top quality bits that meet the high demands of Rockler Woodworking and Hardware. Includes one arbor, two 22mm bearings, and two cutters.
From $28.99
Stile and rail router bits for beautifully crafted frames. Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
$99.99
…Picture Hanging Keyhole Template. Recommend using the 3/8" Hanging Slot Router Bit (92024) and 5/8" Short Shank Guide Bushing and Nut (38756) with the template. (Sold Separately)Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
From $14.99
Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Recommended for crown molding, window casing/sills, baseboards, picture frames, and chair rails. Features two flutes and a 1/2" ball bearing guide.
$49.99
Get six router bit profiles in one handy set! This router bit set includes three popular sizes of radius bits with bearings to convert each bit from a round-over to a bead edge profile. Router bits are tipped with premium grade carbide, precision balanced and finely honed for a clean cut. Includes 1…
$79.99
Cut perfectly rounded ends in a snap! Carbide-tipped bullnose bits cut a complete semicircle to bring the ends of stock to a uniformly round shape.Note: These are large bits to be safely used at reduced RPM.
From $29.99
T-Slots allow jigs to be moved to any position needed on the track.Cuts slots to fit standard T-Slot Bolts. Note: This bit does not cut Universal T-Tracks or slotwalls.3/8" Between Cutter & Shank
$29.99
Rockler rabbeting router bit includes bit and bearings for 5/16", 3/8", 7/16" and 1/2" rabbets. Vary cutting depth by changing bearings. Includes: Allen wrench, 3/8", 1/2", 5/8", & 3/4" bearings.
$39.99
Top quality router bits that meet the high standards of Rockler Woodworking and Hardware.
From $24.99
…precise bits work for any door 5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout. Adjustable shims enable a tight fit when using plywood and also allow use with thick panels from 7/32" to 1/4" thick. High-density carbide composition and Perma-Shield coating lengthen bit life and…
$195.97
Top quality router bits that meet the high standards of Rockler Woodworking and Hardware.
From $57.99
Carbide-tipped rabbeting router bit with four bearings allows you to cut 5/16", 3/8", 7/16 and 1/2" horizontally and up to 1" vertically.Includes Allen wrench.
$49.99
Top quality bits that meet the high demands of Rockler Woodworking and Hardware. Bit has two flutes and 5/8" ball bearing guide. Use to trim cabinet face frames flush with cabinet sides - decorative V-groove conceals the seam.
From $21.99
Instead of chopping at the wood fibers at a 90 angle, the shear angle cutters on these bits slice through stock at a slight angle, producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain or cross-grain…
From $34.99
…-sharp shear-cutting bits along with different bearing combinations to remove exactly 1/16", 1/8", or 3/16" of material in just two router passes-all without a straightedge! Each kit includes one carbide router bit and five bearings to set up the various depths of cut. The Small Bit Kit is perfect for…
From $49.99
…smooth, classic cove profiles with Freud cove bits, which have a shear angle that slices wood similar to the way a craftsman uses a hand plane. Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted portable routers.
From $9.99
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
From $29.99
Top quality router bits that meet the high standards of Rockler Woodworking and Hardware.
$19.99
Unique new profile available only at Rockler! Designed especially for base molding, this carbide-tipped router bit is also ideal for edge-shaping tabletops, box and trunk tops, picture frames, and more. Two flute, 1/2" Ball bearing guide.Manufactured from K20 tungsten carbide for clean cutting action…
$59.99
…-piece kit contains the most commonly used bearings, lock nuts, stop collars, screws and allen wrenches. Comes in a convenient plastic storage case. Bits not included.
$47.99
(0 Items)