…assemble and is keyhole slotted to attach to most router table tops. Galvanized steel components. Router Table Dust Bucket measures 13" W x 13" H x 10" deep. Fits most routers, including large plunge routers. Use only with a 4" dust collection system. The Dust Bucket will not work with a shop vacuum.
This extra-tall dust port is an ideal fit for the Deluxe Router Fence (30136). It also has a flat interface on the back so you can connect your Incra Jig (25971) and Rockler fence without sacrificing dust collection. The included baffle allows you to direct suction to a smaller opening when necessary…
Eliminates dust while flush trimming and routing small decorative edges - among the most common routing jobs woodworkers encounter! Offers easy tool-free installation onto any router baseplate that accepts a standard Porter Cable template guide bushing. 2-1/2" O.D. dust port.
Fixed-Base Dust Collection Adaptor for Porter Cable 450PK Compact Router (#41462). Fits 1" ID and 35mm OD hoses.
Every hood features a large 6" x 12" mouth for efficient dust collection. Available with or without magnets. Edges are folded inside for safety. Listed dimensions state the diameter of the hose fitting. Note: One Quick-Fit clamp of appropriate diameter is required for every connection within your system…
Get more from your Shop Vac! This versatile fitting slides onto standard 1-1/4" ShopVac hoses, allowing you to hook up suction to 2-1/4" (I.D.) dust ports on router tablefences, dovetail jig dust collectors and more.
Finally, an affordable dust collector for your Rockler dovetail jig! You don't have to spend hundreds of dollars to get dust collection with a dovetail jig. Our revolutionary new dust collector eliminates virtually all the dust created when cutting dovetails. It easily attaches to Rockler's dovetail…
…plastic port combines fence and cabinet dust collection for single-sourceextraction. Plus, with two slightly different sized fittings on the port's open end, itaccepts either 4" dust hose or our Dust Right Handle. For open stands, combine the Dual Port with the Dust Bucket.
Expand your dust collection system to nearly every power tool in your shop! Includes 2-1/2" and 4" Dust Right Tool Ports that connect tightly to any shop tool with a 2-1/2" or 4" dust port, while the other fits perfectly into the Dust Right Handle, especially when used with the included Keyed 4" Bridge…
Expand your dust collection system with a handy 4" to 2-1/2" "Y" fitting. Reduces the branch to 2-1/2" for connecting a table saw, jointer, router, etc.
This versatile port expands options with fittings for either the Dust Right Handle orstandard 4" hose. It mounts to router table cabinets, downdraft table cabinets, andother boxed-in dust reservoirs for either quick-release or permanent suction - yourchoice!
…the router bit, and conform to the workpiece for the tightest possible seal, while still allowing good air flow for the vacuum.Note: 2-1/2" Swivel Fitting (31660, sold separately) aids in keeping the dust hose from kinking as the router moves about. Features one end that is 2-1/4" O.D. that fits into…
…HD series machines.Note: 2-1/2" Swivel Fitting (31660, sold separately) aids in keeping the dust hose from kinking as the router moves about. Features one end that is 2-1/4" O.D. that fits into the dust boot and the other end (2-1/2" O.D.) fits our clear dust hose (22784, also sold separately).
This universal dust port easily attaches to shop machines such as router tables for connecting them to dust collection systems. 2-1/2" O.D. tapers to 2-5/16" I.D. and the 2-1/2" hose fits over this end. Flange end is 4" x 3-5/8" with four 3/16" mounting holes. Made of tough 3/32" ABS plastic.