…nearest 1/64" with a Hook Rule! High quality rules are made from hardened and tempered stainless steel and have an adjustable hook that may be used on either side. Use it to measure dimensions from the edge of any board. Precision etched for long life and readability, each rule features 1/8" and 1/16"…
From $9.99
…Express delivery and heavy/oversized items. Not valid at Rockler Retail stores or Independent Partner Resellers.Anodized aluminum profile with integral rule adjusts easily, accurate to 1/32". Rout circles, make precise inside or outside cuts, combine sets for unlimited size. Profiles are 7 7/8" by 3 1/2…
$335.00
Easy to use, versatile and precise are the words which best describe the new INCRA T-Rule. Low glare, matte textured background for high contrast and easy legibility.
From $18.99
…graduations are etched into the metal so they won't wear away, and it's graduated in both inches and millimeters. At 18" long, it's a great bench rule for drafting, laying out joints, and precise measurements. Convenient hang hole keeps it at the ready.
(Reg. $13.99)
Now $4.99
SAVE 64% TODAY!
We measured this rule with a precision caliper - the display read 6.000" on the dot. Now that's Starrett accuracy! Features 1/32" graduations on the short end of the rule, making it perfect for setting bit and blade heights. Compact size means it will always be handy in an apron pocket. The first two…
$28.99
When it comes to jointer setups, layout, drafting, lapping the sole of a handplane, or checking lumber for warp, a precision straight edge is an essential tool for the shop. These premium straight edges are meticulously ground and lapped for straightness and parallelism, and they feature a beveled…
From $26.99
Here's a versatile rule to keep on hand for layout jobs. With a center-finding rulealong one edge and a standard 16" rule along the other, it breezes effortlessly frommeasuring to marking to drafting. The clear acrylic material makes lining up thegraduations with the layout lines fast and accurate,…
$15.99
This unique rule is precisely what you need for layout and measurement along the edge of a board or other workpiece.
From $19.99
This adhesive-backed measuring tape is ideal for miter saws, radial arm saws drill presses or anywhere you need accurate, easy to read measurements. Tape is 6 feet long and available in both left-to-right and right-to-left orientations.
$9.99
Targets the exact center every time. Find dead-center on your project by simply matching numbers. Just measure the end points (say, 7 3/8" ), then find the corresponding number (7 3/8" ) on the lower scale. Made of durable tempered stainless steel with etched, black-filled numbers in standard…
$13.99
The Jet HD Speed Bar Clamps come equipped with the exclusive ergonomic SUMOGRIP® handle. Unlike wooden handles, the SUMOGRIP® delivers a softer, stronger grip for added comfort and increased torque. The user can also count on easy turning with the effortless Acme Thread that ensures smoothness…
From $21.59
…reverse as a spreader.Ergonomic handle has soft grip for added comfort and increased torque.With Slide-Glide trigger for fast, easy adjustments and rule measurement system for a consistent setup.Moveable end stop helps preset clamping capacity.Clamps sold individuallyBench Dogs pictured are only available…
From $44.99
The first stainless steel rule with micro-fine guide holes for marking a fine dot with a sharp pencil or metal scribe.
From $13.99
Our engineer squares with stainless steel rules, are the ideal choice for setting up machinery like table saw blades, jointer knives and fences.
From $12.99
Draw a circle, arc, or straight line the fast and easy way with the beam compass. No measuring or ruler needed. The built-in locking tape rule makes set up a breeze. Gauge slides along work for edge marking. The beam compass allows you to draw a 3-1/2 inch to 72 inch radius.
$36.99
Find the exact center of any workpiece up to 12" wide. Has a built-in protractor, too.
$31.99
…as a standard ruler. One face features a precision angle gaugefrom 0-50, while the other has a 6" x 6" center rule along one edge, and a 12" standard rule along the other. The 3" end rule is useful for setting up machinery.
$19.99
The new INCRA Precision Specialty Rules 6" x 3" X-Y Marker measures from both edges of a corner in one operation! Locate drill centers fast and accurately for positioning and installing cabinet door knobs and handles, installing casters on furniture, or marking flute lines. One or both t-bars can be…
$31.99
6" Pocket Ruler with precise graduations down to 1/64 of an inch and 1 mm. Handy sliding hook makes it easy to remember and transfer measurements. Great for aprons and shirt pockets. Measures up to 6" or 150mm.
$5.99
…backing that can be attached to Rockler Flip Stops (26991 and 31214) or other homemade stops. Inserts are plastic extrusions with a steel rule. The 48" steel rule can be cut to fit the 36" plastic extrusion depending on your needs. Cut your steel measure for either a standard 36" length or beginning…
From $10.99
…Express delivery and heavy/oversized items. Not valid at Rockler Retail stores or Independent Partner Resellers.Anodized aluminum profile with integral rule adjusts easily, accurate to 1/32". Rout circles, make precise inside or outside cuts, combine sets for unlimited size. Profiles are 15 3/4" by 3 1/8…
$475.00
Make marking or cutting arcs, circles and parallel lines easier than ever with the Complete Flat lying Trammel Set!Attaches easily to rules and squaresFlat lyingUnlimited radiusQuick and accurate
$36.99
…accurately and instantly to within a thousandth of an inch! This compact gauge includes a digital readout in metric or imperial as well as a steel rule. Measures from 0 to 3.2" (0-83mm). Perfect for measuring the height of router bits and saw blades, or measuring for placement of a dado with greater…
$25.99
…Job and keep your scribe lines clean and straight. Pencil notch on the end is great for marking lines parallel to an edge. Whether used as a desk rule or combined with the classic 19th century tool, this ruler really measures up. Graduated in 1/16ths on one side, millimeters on the flip side. Ruler…
$13.99
Small size is great for the tool box or your pocket!Features sliding dovetail way and rigid construction.4"/100mm rule with vernier scale.Graduated in 1/16" and mm.
$8.99
|
Need Help? |
(0 Items)