…Perma-SHIELD® coated blade gives new life to underpowered saws and produces smooth crosscuts in hardwoods, softwoods and moldings. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. Thin kerf blades remove less material than standard carbide blades, thus requiring less…
From $49.47
…one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features…
From $71.47
…superior blade gives glass-smooth finishes when crosscutting hard and soft woods, so no sanding is required. What makes this blade so special is the unique side grinding of each tooth. The teeth actually polish the material as it cuts. New laser-cut anti-vibration that resonates in standard blades, producing…
From $71.47
Specially designed blades for chop saws, sliding compound miter saws, and radial arm saws.
From $114.99
…finish. No scoring blades needeed with this blade! The Perma-SHIELD coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to…
From $68.97
…-step finishing (jointing and sanding not required).For another option in the Forrest Woodworker II series, check out the Thin Kerf General Purpose Blade.
$120.79
This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD® coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to 2-3/4" thick…
From $38.47
Using advanced technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates…
From $54.97
This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD® coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to 2-3/4" thick…
$32.97
…virtually chip-free through veneered plywood, melamine, and laminates with this 7-1/4" blade! Features Freud's TiCo Hi-Density Carbide and Titanium craftsmanship for long life and a flawless finish with every cut.7-1/4" blade with 5/8" arbor
$54.97
…scoring blades needed with this blade! The Silver I.C.E. (Industrial Cooling Element) coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor…
$94.97
This blade's specially designed triple chip tooth design produces extremely smooth, true surfaces for gluing and finish work. There is no need for sanding or jointing after the cut. The ideal working range is from 1/8" to 1" thick. This blade also features laser cut anti-vibration slots, practically…
From $69.97
…coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.
From $61.97
…coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.
From $62.97
…tooth geometry make chipout problems a thing of the past. The blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all table saws, from lower-powered portable machines to high-end cabinet saws.
$69.99
…blade does it all. Whether you're ripping or crosscutting, a Premier Fusion blade will tackle any project.The Perma-SHIELD coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD blades resist binding in large volume cutting, reducing subsequent blade…
$99.97
…for effective chip clearance. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this combination blade, there is no need for stabilizers. The Perma-SHIELD coating covers the blade plate and cutting edge in a protective…
From $49.97
…cut. One blade does it all. Whether you're ripping or crosscutting, a Premier Fusion blade will tackle any project. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.The Perma-SHIELD coating covers the blade plate and cutting…
$79.97
Introducing the all new JET® B3NCH 10" Band Saw. If space is at a premium in your shop or on the job, bring this bandsaw along to tackle your toughest jobs. With quick release blade tension, upper and lower ball bearing blade guides, an extra large cast iron tilting table, and a easily adjustible LED…
$374.99
…last!This twin pack of Freud blades includes a 24T General Purpose Blade for ripping and dimensioning, and an 80T Ultra-Fine Crosscut Blade for the fine finishing cuts on intricate molding and joinery. Both blades feature thin-kerf technology, which is less taxing on your saw, and generates less waste.…
(Reg. $119.99)
Now $79.99
SAVE 33% TODAY!
…Perma-SHIELD blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade. The LU86R blade is also available for Festool, DeWalt, and Makita track saws.
From $40.97
…coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.
From $68.47
…while maintaining excellent finish quality on crosscuts. The blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all table saws, from lower-powered portable machines to high-end cabinet saws.
$44.99
…grind for fast, clean rip cuts. The Irwin Marples 10" 24T Saw Blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all table saws, from lower-powered portable machines to high-end cabinet saws.
$34.99
…outside blades with three two wing chippers. This makes it ideal for underpowered saws because it requires less power to feed. Freud's stacked dado set allows you to obtain a perfect fit on shelving, joints, tongue and groove, and more. May be used with most 10" table and radial arm saws. This resharpenable…
From $86.47
(0 Items)