…bits because of the precise shear and hook angles.End of bit relief allows for fast plunging.Cuts all composite materials, plywoods, hardwoods, and softwoods.Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.(Click "More Info" above for specific router bit…
From $18.47
…razor-sharp shear-cutting bits along with different bearing combinations to remove exactly 1/16", 1/8", or 3/16" of material in just two router passes-all without a straightedge! Each kit includes one carbide router bit and five bearings to set up the various depths of cut. The Small Bit Kit is perfect…
From $49.99
Instead of chopping at the wood fibers at a 90 angle, the shear angle cutters on these bits slice through stock at a slight angle, producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain or cross-grain…
From $34.99
…smooth, classic cove profiles with Freud cove bits, which have a shear angle that slices wood similar to the way a craftsman uses a hand plane. Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on hand-held and table-mounted portable routers.
From $9.99
…case. Up-cut router bits are ideal for efficient chip ejection when cutting mortises, dado cuts, and deep blind holes, and also where speed of cut is the primary consideration. They also work perfectly for template routing when the bottom side of the project must be kept chip-free. The bit set comes packed…
$159.97
…downward to shear the top edge for a splinter-free surface, and two large wings that shear upward for a smooth finish. Use 1/2" height for 5/8" stock. Use 5/8" height for 3/4" stock. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
$98.97
…downward to shear the top edge for a splinter-free surface, and two large wings that shear upward for a smooth finish. Use 1/2" height for 5/8" stock. Use 5/8" height for 3/4" stock. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
$98.97
…-performance straight bit eliminates chipping on both sides of the workpiece. Ideal for pattern routing on double-sided panels, edgework, mortises and more. Solid Carbide. 1/2" shank.Application: Fine finish, chip-free routing indouble-sided veneers and laminates. Combination of up and down shear flutes eliminate…
From $81.97
…cutter with opposing shear angles to ensure a flawless finish. Adjustable at .002 inch increments for stock thickness of 1/2" to 1-1/4" and groove widths of 7/32" to 3/8". Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers. Each bit is coated in Silver…
$79.97
…smooth, classic cove profiles with Freud cove bits, which have a shear angle that slices wood similar to the way a craftsman uses a hand plane. Cuts all composition materials: plywoods, hardwoods, and softwoods. Use on hand-held or table-mounted portable routers. 1/2" Diameter x 5/8" H x 1/2" Shank with…
$36.97
…downward to shear the top edge for a splinter-free surface, and two large wings that shear upward for a smooth finish. Use 1/2" height for 5/8" stock. Use 5/8" height for 3/4" stock. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
From $104.47
…Down shear works to eliminatesplintering ideal for hinges, mortises, and dadoes. Freud's Mortising Bits are designed with deep center gullets for maximum material removal without chip loading.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on CNC and other automatic routers as well…
From $18.47
…downward to shear the top edge for a splinter-free surface, and two large wings that shear upward for a smooth finish. Use 1/2" height for 5/8" stock. Use 5/8" height for 3/4" stock. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
$104.47
…downward to shear the top edge for a splinter-free surface, and two large wings that shear upward for a smooth finish. Use 1/2" height for 5/8" stock. Use 5/8" height for 3/4" stock. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
$98.97
…. The shear angle provides the smoothest cut available. Bearing pilots can be removed from bits to produce a traditional beaded groove. Includes smaller bearing and wrench for beading applications at no additional charge.------------------------------------------------Top quality router bits that meet…
From $22.99
…decorative inverted Ogee Profile on the face of door fronts Precise shear angles provide a splinter-free finish. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.
$57.47
…downward to shear the top edge for a splinter-free surface, and two large wings that shear upward for a smooth finish.Use 1/2" height for 5/8" stock. Use 5/8" height for 3/4" stock.Cuts all composition materials, plywoods, hardwoods, and softwoods.Use on table-mounted portable routers.
From $98.97
…pattern work. Downshear cutting angle produces a slicing action for chip-free, splinter-free cuts on the top surface of laminates and veneers. The shear action also delivers easier, smooth cuts in thick materials. The 3/4" diameter body and full 1" or 2" cutting length provide the stability and cutting…
From $32.97
(3)