These sturdy, brass-finished shelf standards can be surface mounted or recessed into cabinet sides. Support slots are spaced at 1/2" for maximum flexibility in adjusting shelf heights. Mounting nails are included. Matching color brass shelf supports (shown below) are also available.
From $2.79
Epoxy coated shelf brackets look great and handle heavy loads. These brackets have no upturns, allowing shelves to extend beyond the end.
From $4.99
Easily create shelves that appear to float on the wall! This sturdy, metal hardware slides inside the shelf so it's completely invisible. Includes supports and mounting brackets for one shelf up to 34" long. Also includes detailed instructions.Click the "More Images" link above to see actual hardware…
$19.49
Built from rugged 1/8" thick steel, these shelf brackets can hold up to 1000 lbs. each. They are available in a range of sizes, in either white or black-perfect forshelves, countertops, wall-mounted desks, lumber racks and tool storage, in the house, shop or garage.
From $22.99
…shelf standards can be either flush or surface mounted. Walnut-colored standards are made from aluminum. Nails are furnished. Dimensions are 5/8" wide x 3/16" thick. Shelves may be adjusted for 1/2" spacing.Matching-color supports are also available. Supports measure 9/16" wide by 3/4" long. Support…
From $2.99
Your glass and wood shelves deserve these handsome brackets! After mounting, sandwich the back edge of any shelf between jaws and tighten to hold in place. When properly mounted to wall studs, brackets support up to 40 lbs. per pair. For shelving 3/16" to 3/4" thick and a maximum of 7-7/8" deep. Jaw…
$12.49
…our I-Semble™ Slip-on Shelf Brackets couldn't be much simpler, but if the shelving system is very large, you might need some additional support against racking. That's where the I-Semble™ Cross Strap Bookshelf Stabilizer Kit comes in. Without clunky braces or supports, the two wires in the system…
$15.99
…furniture, and so much more using minimal tools and I-Semble Shelf Blocks! These brackets measure 6"D x 13"H, giving plenty of room for taller decorative objects. Use them in pairs for narrow shelves, and in sets of four to support very deep shelves. They're so easy to use, even someone with just a few do…
$18.99
The 1/4" slot in these clear plastic shelf supports prohibits vertical movement of shelves. Inconspicuous clear composition makes them ideal for use with glass shelves.
$4.59
Flexible enough to work in tight spaces, sturdy enough to hold up to 750 lbs. per pair!
From $26.99
These locking shelf supports secure 3/4" thick shelves, preventing vertical movement once shelving and supports are in place. Simply drill a 1/4" pin hole to install each support.
$5.69
…our I-Semble™ Slip-on Shelf Brackets couldn't be much simpler, but if the shelving system is very large, you might need some additional support against racking. That's where the I-Semble™ Cross Strap Bookshelf Stabilizer Kit comes in. Without clunky braces or supports, the two wires in the system…
$15.99
…your shop into usable space for lumber storage. Includes two heavy-duty 24" steel standards and six sturdy 14" brackets to make three adjustable shelves that support up to 300 lbs. per shelf! It's the perfect lumber rack to keep just above your miter saw for easy access when cutting rippings to length…
$31.99
1/4" shelf supports. Rubber cushions also available. These 1/4" shelf supports come in nickel, brass, or antique brass finish. Sold in packs of 16. Use rubber cushions to reduce slippage (sold separately). Available in packs of 16.
$5.69
This heavy duty steel bracket holds up to 500 lbs each - one of the strongest brackets available! Perfect for shelves in the laundry room, shop or garage. Your choice of white or black epoxy finish provides a clean, low profile appearance. Brackets are made from heavy, 7/32" thick steel. Mounting hardware…
From $11.49
Perfect for utility cabinet shelves in the shop, laundry room or garage, these durable shelf standards can be either flush or surface mounted. Shelves may be adjusted in 1/2" increments using matching supports (sold separately). Zinc-plated standards are made from cold rolled steel and include mounting…
From $2.59
…90-degree hinge euro brackets and chrome-plated shaft and mounting brackets to help distribute the weight from the cabinet wall to the floor of the cabinet. In addition, the color coated shelf supports match the shelf and provide maximum deflection support.Set includes 2 shelves and pivot hardwareDesigned…
From $122.99
Attractive and durable, these metal shelf standards are ideal for everything from utility cabinets to book cases. Standards are made from epoxy-coated steel and can be surface mounted or recessed into a groove in the cabinet or shelving wall. Matching shelf supports (available separately) clip in place…
From $2.79
These finished, cylindrical supports provide a sturdy base for your adjustable shelving needs.
$4.29
Enjoy the convenience of shelves that fold down when you no longer need them. Perfect for light duty shelving applications that require a low profile space, these folding brackets lock automatically in place when open. Made of heavy stamped steel with heavy rivet hinge points and baked enamel finish…
From $19.99
Heavy-gauge steel folding brackets let you fold away shelving for easy storage and extra work area. Ideal for small work spaces, garages, garden sheds or hobby areas.
$37.99
…Shelf Blocks! They're so easy to use, even someone with just a few do-it-yourself skills can build a beautiful piece of functional furniture for any room. Simply supply your own wood to make quick easy projects with the included pair of durable steel brackets, giving you a 13" space between shelves.…
$20.99
…-Semble Slip-on Shelf Brackets (47934, sold separately) couldn't be much simpler, but if the shelving systemis very large, you might need some additional support against racking. That'swhere the I-Semble Cross Strap Bookshelf Stabilizer Kit comes in. Withoutclunky braces or supports, the two wires in…
$11.99
Carved in traditional designs, these solid Maple Corbel Brackets will add classic beauty to your custom shelves while giving additional support to kitchen counters, bars and ledges. Choose from Traditional Corbel with its intricate scroll work; the simple lines of the Mission Corbel, or the stylish curves…
From $48.99
These shelf brackets are perfectly sized for narrower shelves in closets, laundryrooms, workshops, and any area where space is at a premium. They are theperfect depth for paint and finishing cans, hand tools, a router shelf, moldingand much, much more. Screws not included. Sold singly.
(Reg. $1.59)
Now $0.50
SAVE 68% TODAY!
|
Need Help? |
(0 Items)